TOP electric jackhammers: rating by quality and price. Which one is better to buy?

The best electric jackhammers

The electric jackhammer operates on a standard 220 volt network. Its main advantage is the absence of additional elements in the system. You simply plug the tool into a power outlet and you can use it. True, there are also disadvantages regarding power limitations. Pneumatic hammers are more powerful and more economical, but due to a certain complexity in their work, they are more often used in production or large construction sites. At home, an electric hammer is the best option.

Additional features and functionality

The best electric jackhammer usually has additional features. They can be expressed in the following functions:

• Smooth launch . When turned on, the bumper motor accelerates gradually rather than suddenly. This eliminates electrical surges and hammer jerking. Therefore, when switching on, the hammer will not be pulled out of your hands. Relatively few models are equipped with a soft start function. If you are buying a powerful device with high impact force, look for a model with a soft start.
• Adjusting and maintaining the number of strokes . The adjustment function allows you to adjust the number of blows for the specific material being processed. And the blow maintenance function allows the device to always work at the same speed, despite changes in the load during chiselling. Among devices with such a set of functions, we can recommend a good bump stop Makita HM1307CB .

• Anti-vibration system . This system reduces vibration transmitted to the hands. Considering that the vibration when working with the bump stop is very high, this system really helps. It is organized differently in different devices, so it is best to find out about the quality of the anti-vibration system from reviews or video reviews. Let us only add that such a system is extremely necessary when working with fenders with high impact force.
• Quick access to carbon brushes and indicator for their replacement . In electric fenders, the carbon brushes need to be changed from time to time. Some devices have a special indicator that indicates the need to replace them. Also, in certain models, to replace the brush, you simply need to unscrew the “plug” without disassembling the entire frame. This is very convenient as it takes much less time.
• Case . Absolutely any jackhammer takes up a lot of space. If the kit includes a case or bag, then storing and transporting it is much easier.

Home repair tool:

• Doing repairs while at home: the best cordless screwdrivers 2020
• 6 best inexpensive grinders for 125 mm wheels

The best pneumatic jackhammers

A pneumatic jackhammer is powered by compressed air, which pushes the tip of the tool under very high pressure. To provide this pressure, a compressor is needed, and its size directly depends on the power of the tool. Simply put, you will not be able to connect a powerful hammer to a small compressor with a low-capacity receiver and work. You will need an industrial device. All this makes it almost impossible to use pneumatic tools at home, and there is no need for them if you do not plan to break concrete piles or FSK.

Rating

Some well-known companies that manufacture electric jackhammers include the following:

• Makita.
• Bosch.
• Hitachi.

• DeWalt.
• Stavr.
• Anchor.

It is cheaper to purchase jackhammers from Russian manufacturers, especially from young companies.

Makita HM1203C

The Makita HM1203C jackhammer is a professional-grade tool. He works with concrete, stone and brickwork. The hammer power is 1500 W, and the impact force reaches 25 J. The blows are often adjusted depending on the material being processed: from 950 to 1900 blows per minute.

Pros:

• Reliable fixation of the slider keeps the device turned on.
• Reduced vibration level.

• Having two handles.
• SDS-MAX chuck: responsible for quick and convenient change of equipment.

Innokenty
bought a Makita for concrete processing. I liked the power and speed of the unit. But the weight of 9 kilograms does not allow you to use the hammer for a long time - you have to take breaks.

Dmitry
This hammer is located several levels above household hammer drills. It is expensive, but the price is paid off by the service life of the tool. This is my second year using it and so far I have managed without the help of repair shops. My previous hammers didn't last longer than a year.

Bosch GSH 5 CE Professional

Like the Makita HM1203C, the BOSCH GSH 5 CE is part of the professional line. It is the first unit in the world for which a vibration damping system was developed - in the impact mechanism and in the handle. The hammer hits with a force of 8.3 J, and the motor operates at 1150 W. The body of the device is made of high-quality metal, which increases its reliability. The maximum speed of the device is 2900 beats per minute.

Pros:

• Constant Electronic technology: stabilizes speed under load.
• Branded anti-vibration system “Vibration Control”.

• Vario-Lock technology: adjusts the bit position based on 12 possible positions.
• Built-in wheel for selecting the number of revolutions.

Maxim
Over several years of work, the hammer has not let me down. It is quite lightweight and excellent for installation work. The power button remained unclear. It occupies the entire area of ​​the handle and is squeezed out from below when turned on. It's a little distracting when working.

Nikolai
Selected a tool for working on concrete. In recent months I have not turned it off from 10 am to 6 pm - the device can withstand the load perfectly. Compared to other fenders, the model pleases with its compactness.

Stanley STHM10K

The Stanley STHM10K hammer removes old tiles, plaster and cement deposits. Thanks to the soft start system, the tool does not jerk when starting to work. The impact force is adjustable and can take values ​​from 5 to 25 J. The power of the device is 1600 W. The maximum speed reaches 1890 beats per minute.

Pros:

• Indicator of the current state of the brushes.
• Adjustable impact force and operating speed for different surfaces.

• Rubberized handle that absorbs vibrations.
• Case and chisel included as standard.

Denis
It’s a pleasure to work with this tool - your hands don’t get tired or go numb. I bought it six months ago to widen the doorways. The device coped with the task with an excellent rating.

Konstantin
Finally found a replacement for my old Bosch hammer. One of the main advantages was the price - tools with such characteristics usually cost one and a half to two times more. For the first few days I couldn’t get rid of the smell of plastic, but then it evaporated on its own.

Stavr MOE-1300

The hammer from the domestic manufacturer STAVR MOE-1300 has an SDS-max cartridge, which allows you to easily change the working bit. The side handle of the tool rotates - depending on the position of the master during work. The hammer power is 1300 W, the maximum number of blows per minute is 3900.

Pros:

• Convenient network cable 5 meters long.
• The "Start" key is fixed during operation to prevent inadvertent shutdown.

• The handle is covered with rubberized inserts.
• The hammer comes with spare carbon brushes, a removable handle and a container of lubricant.

Vadim
I was looking for an inexpensive and powerful tool to chisel solid ground. I am satisfied with the purchase. A cheap and almost weightless device. I can’t say yet how it will behave with harder materials.

Fedor
I have been using a hammer in everyday life since 2021. The instrument is quiet, vibrates weakly, and performs its promised functions properly. I plan to order another one soon to replace it.

Sturm RH2521P

The Sturm RH2521P jackhammer has a narrow specialization. It is used to destroy concrete and brick walls and foundations. Effectively copes with opening road surfaces and dismantling hard surfaces. In some stores it may be called a concrete breaker. Operates at a speed of 1500 beats per minute, impact energy is 48 J.

Pros:

• Dust removal system.
• Anti-vibration casing coating.

• Rotating additional handle.
• The set includes a case on wheels for comfortable transportation of the device.

Oleg
A good and powerful tool for the money. Copes with a variety of materials, destroys absolutely everything. There would be no price for it if it weren’t for the wear of the piston. Because of it, the idle speed disappears and the pico holder pin breaks.

Alexey
I took the instrument three months ago. At first I was confused by the rapid heating of the case, but over time it went away. It may seem heavy to some, but the comfortable handle compensates for the heavy weight.

DeWALT D 25902

The DeWALT D 25902 hammer specializes in concrete, but can also handle other hard surfaces. The 1550 W electric motor makes this tool a universal assistant for installation work. The balanced design of the device allows you to hold it in your hand for several hours. The impact force of the hammer reaches 19 J, and the maximum operating speed is 2100 blows per minute.

Pros:

• Active vibration control system.
• The body is made of magnesium alloy, making it lightweight.

• Suitable for working in narrow spaces due to its linear shape.
• The hammer comes with a side handle, chisel and case.

Arkady
A high-quality and powerful tool. During all the time I worked at a construction site, I managed to change three of these hammers. I use it when dismantling brick walls. Fenders from other companies give up after a couple of months, but DeWALT stands to death.

Ruslan
A good breaker with whom I have never had any difficulties. A couple of years ago I would have written about the ideal price-quality ratio, but now this model has become much more expensive with the old functionality.

Hitachi H65SB2

The Hitachi H65SB2 jackhammer is a professional-level tool. It is one of the most popular models in its class. The motor power of the device is 1340 W, and the impact force reaches 42 J. It is equipped with anti-vibration and noise-reducing systems. Maximum speed – 1400 beats per minute.

Pros:

• Dust protection and double internal insulation.
• Two handles with a coating that dampens vibrations.

• The side handle rotates 360 degrees.
• The motor housing is made of wear-resistant alloy.

Grigory
bought Hammer for work on overburden sites - to crush concrete. Over two years of operation, there were no complaints about the instrument. I changed the chisel once, after which the bump stop became like new.

Roman
operated the hammer non-stop. He demolished concrete steps, made holes in the concrete for sewer work, chiseled openings and even frozen ground. The unit doesn't care.

Electric jackhammers are purchased by both professional builders and beginners. In stores you can find tools from several thousand rubles to tens of thousands. In order for the device to be useful in practice, it is important to understand its technical characteristics before purchasing.