Your own sewage pump in summer cottages will not be superfluous, since most of them do not have a centralized sewerage system. Many villages also do not have sewer outlets, and all sewage and flood waters go either into drainage pits and septic tanks, or into street toilets, which need to be cleaned somehow.
This is where such a unit comes in handy.
To help you choose, we have compiled for you a rating of the best fecal pumps from various manufacturers in terms of price/quality ratio.
When selecting models, we took into account the ratio of cost, quality, performance, as well as the opinion of experts and users, and Rosstat statistics. Here you will find only the best fecal pumps.
Rating of the TOP 15 best fecal pumps of 2020-2021
| Place | Name | Price |
| TOP 5 best fecal pumps for pumping out sewerage by price/quality for 2021 | ||
| 1 | GILEX Fecal 330/12 (1200 W) | Find out the price |
| 2 | JILEX Fekalnik 260/10 N (800 W) | Find out the price |
| 3 | VORTEX FN-2200L (2200 W) | Find out the price |
| 4 | VORTEX FN-250 (250 W) | Find out the price |
| 5 | BELAMOS DWP 1300CS | Find out the price |
| TOP 5 best inexpensive fecal pumps | ||
| 1 | JILEX Fekalnik 230/8 (590 W) | Find out the price |
| 2 | CALIBER NPTs-1400U (Aqua Line) (1400 W) | Find out the price |
| 3 | GILEX Tugunok 140/6 (250 W) | Find out the price |
| 4 | JILEX Fekalnik 200/7 N (450 W) | Find out the price |
| 5 | JEMIX GS 400 (400 W) | Find out the price |
| TOP 5 best powerful drainage pumps | ||
| 1 | Pedrollo BCm 15/50 (MCm 15/50) (1100 W) | Find out the price |
| 2 | VORTEX FN-1100L (1100 W) | Find out the price |
| 3 | VORTEX FN-1500L (1500 W) | Find out the price |
| 4 | UNIPUMP FEKACUT V1300DF (1300 W) | Find out the price |
| 5 | CALIBER NPC-1100U Aqua Line (1100 W) | Find out the price |
Types of fecal pumps
Sewage pumps operate in an aggressive, chemically active environment. In addition to the fact that their body must be sealed, the materials from which it is made must be chemically neutral and resistant to aggressive environments. There are very few such materials:
- stainless steel;
- some types of plastic;
- cast iron.
The best material is stainless steel, but this material is also the most expensive. The most budget option is a plastic case. These models are the cheapest. In the middle price category there are fecal pumps for pumping out sewage with a cast iron body. Despite the fact that you rarely use this device, you should not choose cheap models. Perhaps for a dacha where you come only from time to time.
This is all a submersible sewage pump with a grinder
By type of installation, pumps for pumping out feces are:
- Submersible. They are installed at the bottom of the tank and usually operate in automatic mode. Switching on/off occurs using a float switch. The float rises/falls along with the liquid level; when it is at the bottom, the pump is turned off.
- Semi-submersible. These pumps are elongated, their suction part is located quite far from the motor. The motor remains on the surface, it floats on a special platform, the suction part is located in the thickness.
- Superficial. Only the hose connected to the inlet pipe is lowered into the tank; the device itself is located next to the tank. A surface sewer pump usually has a plastic body and low capacity. This is basically a country option.
Now we need to figure out all this diversity - when and which devices are best to use.
How to choose a fecal pump for pumping out sewage?
In order not to make a mistake with your purchase and not to take a pump that is too powerful, too weak or unsuitable for operating conditions, you must first understand what such units are needed for.
Sewage pumps are used to clean drainage drains, septic tanks, cesspools, remove flood water from basements and cellars, and empty wells.
They are equipped with filters that allow particles of certain diameters to pass through.
When choosing a model, you should pay attention to the following parameters:
- type of installation - submersible ones are lowered directly into a septic tank or pit, surface ones are installed near storage manifolds and are used to transport masses from a depth of no more than 7-9 m;
- pump type - drainage is designed for contaminated water with small particles, while fecal pumps can pump viscous media with large inclusions. Fecal models are often equipped with cutting elements;
- case material - models are mainly supplied with plastic cases, they are easy to maintain, lightweight, reliable, but there are models with cast iron or steel cases. Metal cases can react with some components of bioreagents, so such models should be used with caution;
- immersion depth - depends on the depth of the pit or septic tank, the parameters must correspond to each other;
- the presence of a grinder is optimal for using the pump in outdoor toilets, cesspools and drains with solid components.
TOP 5 best fecal pumps for pumping out sewerage by price/quality for 2021
GILEX Fecal 330/12 (1200 W)
The submersible model is one of the most practical choices for a summer residence . The pump is suitable for
pumping drainage and rainwater with organic inclusions with a diameter of no more than 37 mm.
Equipped with a float switch that automates the work process and saves energy.
Under heavy loads and high temperatures, the thermal relay is automatically activated. Excess of the system in the air is removed using a special valve.
In addition to standard applications, the pump copes well with pumping water from swimming pools, wells, tanks, gutters and basements.
Due to the design features, the model imposes requirements on the liquid temperature - no more than 35 degrees.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 19.8 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- low energy consumption;
- low noise level;
- protection against idle operation and overheating;
- power and throughput.
Minuses
- The size of the connecting hoses is incorrectly indicated in the documentation.
JILEX Fekalnik 260/10 N (800 W)
Robust and reliable pump with stainless steel housing provides good flow capacity and pressure.
The float system reliably protects against idling and guarantees full automation of the pump operation.
The engine is equipped with a cooling system to protect against overheating; if the temperature is significantly higher, a thermal protection relay is activated.
It is possible to connect several types of hoses depending on the pumped liquid.
It copes well with draining wells and water reservoirs and will create pressure in the system for watering vegetable gardens or orchards. Valued by users for its reliability and versatility of use.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 15.6 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- automatic operation;
- idle protection;
- engine protection;
- versatility.
Minuses
- not equipped with a chopper.
VORTEX FN-2200L (2200 W)
One of the most powerful fecal pumps in the company's line . Due to presence in
The design of the shredders can be used for pumping out liquids with a high degree of contamination.
Additionally, it can be used for draining basements and cellars, basements, wells and swimming pools.
Placement is possible either on a special platform or suspended on a cable. Protected from idle operation and overheating.
Works out of the box - no need to upload or configure.
An important point is that the device should not come into contact with chemicals, therefore, it is not suitable for cesspools that have been previously cleaned with septic tanks.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 30 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- durable body;
- power;
- overheat protection;
- works out of the box.
Minuses
- not suitable for technical waste.
VORTEX FN-250 (250 W)
A simple and economical pump that provides good flow capacity.
Equipped with an asynchronous motor with overheating protection and a centrifugal pump with impeller wheel and float system.
Passes particles up to 27 mm in diameter.
Operates at a liquid temperature of no more than 35 degrees due to plastic parts in the design.
Can be used for draining wells, water tanks, car washes, and to create pressure at irrigation facilities.
Contact with aggressive chemical compounds is undesirable. It is not equipped with a grinding blade, so it is not suitable for cesspools.
Specifications:
- Type: submersible;
- Immersion depth: 9 m;
- Throughput: 9 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- reliability;
- energy efficiency;
- performance;
- ease of operation.
Minuses
- may jam.
BELAMOS DWP 1300CS
An excellent pump for removing liquids from cesspools with large inclusions up to 25 mm.
The cast iron body is resistant to temperature changes, and its strength allows the pump to be used in the most difficult conditions - for pumping industrial wastewater, sewage water, water with fibrous inclusions, draining flooded basements and cellars.
The scope of application is practically unlimited - the model performs well both in domestic conditions and on construction sites, car washes, and various tanks.
Successfully copes with viscous liquids. Resistant to corrosion, overheating, protected from idling thanks to the float system.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 18 cubic meters/hour;
- Body: cast iron;
- Installation: vertical.
pros
- presence of shredders;
- metal case;
- performance.
Minuses
- Doesn't pump out completely.
Review of the best submersible sewage pumps
| Place | Rating of the best submersible pumps | price, rub. |
| 1 | SFA SANIPUMP | 28420 |
| 2 | DAB FEKA VS 750 | 24432 |
| 3 | VORTEX FN – 1500 l | 11450 |
| 4 | BELAMOS DWP 1300 CS | 9850 |
| 5 | GILEX FECAL | 5246 |
| 6 | VORTEX FN — 450 | 7590 |
| 7 | STURM! WP 9775 SW | 7390 |
| 8 | JILEX FEKALNIK 140/6 | 2881 |
SFA SANIPUMP fecal pump
Country of origin: France
The device is suitable for pumping waste and sewage water from various containers. It copes with the task quickly and efficiently, thanks to the cutting mechanism it deals with large and solid waste.
SFA SANIPUMP fecal pump
Advantages:
- powerful motor - 1500 W;
- high performance;
- has a chopper;
- the weight of the device, which makes it mobile and compact, is 13 kg;
- ease of installation;
- high wear resistance;
- method of activating the device - float;
- maximum diving depth – 5 meters;
- the engine is protected from thermal overloads;
- almost silent operation of the device;
- warranty from the manufacturer – three years;
- Suitable for domestic use for pumping waste water in bathrooms, kitchens, bidets, sinks and washing machines and dishwashers.
Flaws:
- high price of the unit.
Sewage pump DAB FEKA VS 750 MA
Country of origin: Italy.
This unit can be used in private houses and garden plots, as well as in apartments in apartment buildings. Installation type – vertical. The device has high performance, it is compact and mobile, weighing 17.5 kg.
Sewage pump DAB FEKA VS 750 MA
Advantages:
- high performance;
- there is a handle on the body, which makes it convenient to transport;
- smooth engine start;
- the device motor is protected from overheating;
- the device's pump operation is automated;
- Durable and high-quality materials are used in the manufacture of the unit;
- wear resistance and durability of the device, subject to compliance with the rules and technical specifications.
Flaws:
- high price of the device;
- no chopper.
Fecal pump VORTEX FN-1500L
Country of origin: China.
The unit is powerful and reliable, affordable in terms of price. Quickly and effectively copes with the main task. Installation of the device – vertical, motor power – 1500 W
Fecal pump VORTEX FN-1500L
Advantages:
- affordable price;
- the body is made of cast iron and steel;
- high performance;
- powerful pressure;
- equipped with a chopper;
- protection of the engine from dry running and overheating;
- the chopper blade is not powerful enough;
- equipped with a connecting pipe.
Flaws:
- short power cord;
- heavy weight of the unit;
- The bolts, impeller, and knife rust too quickly.
BELAMOS DWP 2200
Country of origin: Russian Federation.
This device is produced by the Russian company Belamos. The company manufactures various pumping equipment, from pumps to stations. The design is just being developed in Russia, and the finished product is assembled in China. This unit has a shredder that copes with large and solid waste. The device operates in a viscous liquid, the motor is protected, and the housing is made of durable and reliable material.
BELAMOS DWP 2200
Advantages:
- high performance;
- The device body is made of steel and is resistant to external factors;
- pump parts are made of cast iron;
- the shredder allows you to deal with various fractions of solid waste;
- powerful motor – 1300 W;
- float switch;
- suitable for use in extreme conditions;
- engine overheat protection;
- conveniently sized cable for connecting power supply – 10 meters.
Flaws:
- unit weight – 32 kg;
- The shredder blade cannot cope with the remnants of ropes and fabric.
Gilex Fecal 330/12
Country of origin: Russian Federation.
Submersible pump, which is suitable for pumping clean water, as well as ground and drainage water. The device is convenient for use in domestic conditions, as well as for carrying out work on pumping large volumes of water (reservoirs, reservoirs and wells). The design of the device is designed in such a way that it allows the pump to operate for a long time.
Gilex Fecal 330/12
Advantages:
- the weight of the device, its compactness and mobility;
- affordable price;
- convenient length of electrical cable;
- normal level of performance;
- switch type – float;
- the pump motor is equipped with self-lubricating bearings;
- the engine is protected from overheating.
Flaws:
- plastic case;
- high degree of damage to the plastic housing during transportation or installation of the unit;
- no chopper.
Gilex Fekalnik 260/10 N
Country of origin: Russian Federation.
Gilex Fekalnik 260/10 N
Another device from this company that will allow you to pump out water and wastewater quickly and reliably. The model’s body is made of steel, which adds an advantage over the previous pump model. Otherwise, the characteristics, advantages and disadvantages are identical to the model described above.
Pump VORTEX FN-450
Country of origin: China.
The body of the unit is made of metal, which protects it from chemical exposure and other external factors. The pump has legs on the bottom, which ensure its stability and strength during operation of the device.
Pump VORTEX FN-450
Advantages:
- high performance;
- cooling of the pump motor is ensured;
- the supply current of the device is alternating single-phase;
- asynchronous motor, single-phase with squirrel-cage rotor;
- float switch;
- the presence of a thermal protector, thanks to which the pump turns off automatically;
- presence of a valve;
- the body is made of steel;
Flaws:
- inconvenient fastening of the electrical wiring valve;
- high probability of wire chafing;
- heavy weight.
Sturm! WP9775SW
Country of origin: China.
Submersible type fecal pump, the device is convenient and easy to use, suitable for home use. Suitable for pumping and pumping out cesspools and cellars, suitable for drying tanks, swimming pools and ponds. The pump is equipped with a powerful 750 W motor, which is protected from overheating and overload.
Sturm! WP9775SW
Advantages:
- the body is made of cast iron, the rotor shaft is covered with chrome;
- there is a handle for carrying the device;
- affordable price;
- high performance;
- the impeller is made of steel;
- there is a chopper;
- no vibration during operation.
Flaws:
- not attractive enough design;
- The weight of the device is quite heavy - 14.85 kg.
TOP 5 best inexpensive fecal pumps
JILEX Fekalnik 230/8 (590 W)
Submersible pump for pumping both clean water from tanks and groundwater, drainage, sewage water and liquids with inclusions up to 35 mm in diameter.
Convenient for construction and household work, when pumping large volumes of water.
The device does not have the highest throughput, but can easily withstand long-term loads.
The engine is equipped with self-lubricating bearings, extending the life of the unit and its operating time.
The float system protects against idling and saves energy.
Thanks to the plastic housing, the pump is easy to move and transport, but the plastic housing is easy to damage if used carelessly. There is also no shredder.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 13.8 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- mobility;
- performance;
- self-lubricating bearings;
- long service life.
Minuses
- unreliable body.
CALIBER NPTs-1400U (Aqua Line) (1400 W)
Pump for pumping rain and groundwater, draining gutters, swimming pools, wells, drainage pits.
Passes particles up to 40 mm, is not equipped with cutting elements. Optimal for household tasks, pumping sewerage in private or country houses.
Works almost silently, provides good pressure and performance.
It can also be used in car washes and for pressure in irrigation systems in gardens and vegetable gardens.
However, users note that the pump often becomes clogged even if there are inclusions in the water that are allowed by the technical characteristics of the device.
Specifications:
- Type: submersible;
- Immersion depth: 7 m;
- Throughput: 24.96 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- pressure;
- low noise level;
- price.
Minuses
- clogs quickly.
GILEX Tugunok 140/6 (250 W)
Small in size and power pump for pumping liquids from drainage pits, septic tanks, shallow wells and water tanks.
It is not equipped with a knife, it only allows particles with a diameter of no more than 32 mm to pass through, so it is not suitable for outdoor toilets.
Does not cope very well with silty masses in septic tanks and thick masses in drainage pits.
Shows itself well as a well pump for draining basements, cellars, ground floors.
Easy to operate and maintain, repairable on your own.
In addition, the model features low noise and low power consumption..
The light weight and dimensions allow the unit to be quickly redirected and reconfigured if necessary.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 8.4 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- efficiency;
- low noise level;
- protection against idle operation and overheating;
- Corrosion resistant;
- long service life.
Minuses
- the filter clogs quickly;
- not for drainage pits;
- does not pump out sludge from septic tanks well.
JILEX Fekalnik 200/7 N (450 W)
An inexpensive submersible pump with a stainless steel body will ensure long-term operation both in a single session and in general.
It has good performance; it can be submerged to a depth of up to 8 m, which allows it to be used both for septic tanks or cesspools without reagents, as well as for deep tanks and wells.
Thanks to the housing, it can be placed in water for a long time and used to create pressure in irrigation systems, in vegetable gardens or orchards for watering crops.
It is not equipped with a grinder, so it can hardly cope with thick masses.
The float mechanism protects against idling, and the engine is protected from overheating. Suitable for use for both domestic and construction needs.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 12 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- low energy consumption;
- stainless steel housing;
- protection against idle operation and overheating;
- reliability;
- long service life.
Minuses
- not for septic tanks with bioreagents.
JEMIX GS 400 (400 W)
Small sewage pump for shallow cesspools, pumping out liquids from flooded basements and basements, draining groundwater and flood water, and draining tanks.
Availability and ease of use are ensured by low cost, lightweight plastic case, and a float mechanism that protects against dry running. Designed for a long period of operation.
Despite its low power and throughput, it does an excellent job of automating the pumping of liquids with impurities and inclusions up to 35 mm in diameter.
Economical in terms of energy consumption.
Completely ready for use out of the box, and also repairable on your own, since the case is easy to open with ordinary tools.
Specifications:
- Type: submersible;
- Immersion depth: 5 m;
- Throughput: 7.5 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- efficiency;
- ease of maintenance and repair;
- price;
- long service life.
Minuses
- low throughput.
Rating of the best surface fecal pumps
Before purchasing such equipment, it is important to determine the room where the pump will be installed. This is the main disadvantage, but servicing the equipment is very convenient.
UNIPUMP SANIVORT 255 M
This is a surface device for drainage of wastewater from a domestic manufacturer. Characterized by an affordable pricing policy. Inside the case there is a pump with a pressure sensor, which allows the device to automatically start or shut down. The engine has low power, but overall performance is optimal – 4.9 cc. m/hour. A positive point is the presence of a check valve, which prevents the return of pumped out masses to the equipment.
pros:
- Low cost.
- Automatic startup and shutdown process.
- Optimal work performance.
- Has a built-in check valve.
Minuses:
- Low motor power
- Small functionality.
GrundfosSololift 2 WC-1
A small-sized, high-capacity surface-type pump. All the main elements are housed in a high-quality and sealed plastic case. The engine is 0.62 kW, which allows you to achieve a head of up to 8.5 meters and a productivity of 8.94 cubic meters. m/hour. Inside there is a shredder, which is characterized by its efficiency, and there is also a valve for ventilation with a filter. The main disadvantage of the device is the small power cable, only 1.2 meters. Product from a Serbian manufacturer with a warranty period of 2 years. Works automatically using a sensor.
pros:
- Production station.
- Efficient shredder.
- Has a built-in carbon filter.
- Beautiful appearance.
Minuses:
- Loud operation.
- Small wire for connection.
</>
SFA SANIACCESS 3
This model allows you to quickly create a system for draining wastewater from the toilet. The device is manufactured using modern technologies with the best materials, due to which the user receives uninterrupted operation. The manufacturer provides a warranty period for the product of 3 years. The main characteristics are decent, the pump is capable of lifting waste by 5 meters, and also moving it along a horizontal plane by 100 meters. Unit capacity 4.8 cubic meters. m/hour. There is a shredder inside, which helps to process solid particles, toilet paper. Users love the ease of installation, fairly quiet operation, and small size. The main disadvantage is the high cost.
pros:
- Quiet operation.
- Easy installation.
- Easy maintenance and management.
- Unpretentiousness of the system.
High cost is the main disadvantage of the model.
TOP 5 best powerful drainage pumps
Pedrollo BCm 15/50 (MCm 15/50) (1100 W)
A powerful premium pump produces one of the highest throughput and pressure values, passes particles up to 50 mm, but immersion is allowed no more than 5 meters.
The pressure power is provided by a two-channel stainless steel impeller.
The motor winding is perfectly insulated by a double seal with an intermediate oil chamber.
All parts, except the housing, are made of stainless steel, which will ensure a long service life of the pump.
The control is automatic due to an external float switch, which additionally provides protection against dry running.
Specifications:
- Type: submersible;
- Immersion depth: 5 m;
- Throughput: 48 cubic meters/hour;
- Body: cast iron;
- Installation: vertical.
pros
- sealing;
- decent performance;
- Corrosion resistant;
- long service life.
Minuses
- price.
VORTEX FN-1100L (1100 W)
Domestic pump, designed specifically for Russian conditions, while having high performance.
It is quite sufficient for working with cesspools of standard volume. Equipped with a powerful motor with thoughtful overheating protection, and a stainless steel case guarantees a long service life.
Equipped with a grinding attachment that crushes large fractions to the required size.
The protection of the main elements is provided by a classic float mechanism.
With a relatively low throughput it gives good pressure and can be used for irrigation systems, drainage of swimming pools, wells or flooded basements.
Specifications:
- Type: submersible;
- Immersion depth: 9 m;
- Throughput: 14 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- assembly reliability;
- efficiency;
- pressure
Minuses
- Knives rust quickly.
VORTEX FN-1500L (1500 W)
Excellent pump in terms of performance at an affordable price - high throughput, excellent pressure, powerful motor, protection against overheating and dry operation, economical energy consumption.
Equipped with cutting elements that crush particles to the required size.
The float switch protects against dry running and ensures full automation of the entire pump operation..
The durable stainless steel and cast iron body will last for a long time. However, the model is sensitive to liquid temperatures - no more than 35 degrees - due to plastic parts.
Specifications:
- Type: submersible;
- Immersion depth: 8 m;
- Throughput: 24 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- low power consumption;
- reasonable cost;
- strength;
- long service life.
Minuses
- the impeller and knives quickly rust;
- The side fitting is inconveniently located.
UNIPUMP FEKACUT V1300DF (1300 W)
Almost silent, unpretentious pump for draining sewage water and wastewater without large fibrous inclusions.
Passes particles with a diameter of up to 30 mm. Well suited for draining septic tanks, water tanks, basements, ground floors.
Works on a reliable float mechanism, which simultaneously provides protection against dry operation and full automation of the entire system.
The kit includes a cable for hanging and a fitting for attaching a sleeve. The cutting attachment crushes inclusions to the required size, preventing clogging of the pump.
Easy to maintain and install, but not suitable for water containing abrasive particles, metal shavings, seawater or flammable mixtures.
Specifications:
- Type: submersible;
- Immersion depth: 5 m;
- Throughput: 18 cubic meters/hour;
- Housing: stainless steel;
- Installation: vertical.
pros
- unpretentiousness;
- low noise level;
- protection against idle operation and overheating;
- ease of operation.
Minuses
- price.
CALIBER NPC-1100U Aqua Line (1100 W)
A productive drainage pump with a centrifugal mechanism is easy to use, lightweight and easy to maintain..
Passes particles with a diameter of up to 40 mm, suitable for cesspools with liquid contents, septic tanks, as well as draining wells and water tanks.
Not suitable for pumping thick masses, which must be taken into account when using the pump to clean toilet pits or clogged septic tanks.
Can be used to drain flooded rooms, copes well with groundwater and melt water.
Light weight makes it easy to move the pump if necessary - the plastic housing is reliable and resistant to damage.
The long power cord is an additional plus.
Specifications:
- Type: submersible;
- Immersion depth: 7 m;
- Throughput: 20 cubic meters/hour;
- Housing: plastic;
- Installation: vertical.
pros
- efficiency;
- performance;
- protection against idle operation;
- resistant to bioreagents;
- long service life.
Minuses
- not for thick masses.
Which company should you choose?
Pumps are supplied to the Russian market by a considerable number of companies, both domestic and foreign.
Among them we can highlight:
- Gilex is a domestic manufacturer that supplies affordable equipment of acceptable quality. The line includes both professional units and pumps for domestic use. It produces models with plastic and steel cases, lightweight, sealed, with reliable thermal protection and ease of maintenance and repair;
- Herz is a German manufacturer whose models have increased wear resistance and a long service life. Their main feature is the ability to work even in extreme conditions. Some models have increased power - up to 260 liters of liquid per minute. The cases are made of cast iron, the parts are made of steel, so the models are quite heavy;
- Vikhr is another Russian manufacturer that has proven itself well in the market. Many models are equipped with shredders, so the units are in high demand. The bodies are made of cast iron, and the chopper blades are made of high-strength steel. Models are capable of pumping up to 24 cubic meters of liquid per hour.
Popular models for private homes and cottages
We offer you several popular feces found on our market. Choose which device will be best in your case.
Gilex
Depending on the model, the motor power ranges from 0.4 to 1.1 kW. Used for pumping thick masses with fractions up to 3.5 cm in diameter. Possibility of lowering to a depth of up to 8 meters. There are options with plastic and stainless steel housing. Automatic is included in the package. The price of a pump is from 3 to 5 thousand rubles.
Caliber NPC
Installation power 1.35 kW. Suitable for deep sewage pits. Capable of lifting masses from a depth of 12 meters. Pumps out up to 300 liters per minute. Knives and float included. The body is made of cast iron, some models are made of steel. Automation is also provided to prevent overheating. Cost from 5 to 8 thousand rubles.
HERZ WRS25
Representative of German production. An important advantage of the pump is its ability to pump mass with inclusions up to 14 mm in diameter. Users note long service life and wear resistance. Do-it-yourself installation is possible. Produced with cast iron and stainless steel body. Capable of pumping up to 260 liters per minute. The motor has a power of 0.8 kW. The kit includes automatic overheat protection. Estimated cost 13 thousand rubles.
Grundfos Liftaway
Capacity is 100 liters per minute. For surface models, a relatively powerful and reliable engine. The package includes a chopper. A clear disadvantage is the minimum mass suction height of no more than 1000 mm.
Wilo DrainLift Box
The unit is equipped with a 0.6 kW motor. Due to this, significantly high productivity, up to 300 liters are pumped per minute. There is automation in the form of a float switch. If used permanently, breakdowns may occur due to high load.
Pedrollo
This manufacturer produces both submersible and surface models. There is an impeller installed inside, on which there is a chopper. Capable of passing and processing particles with a diameter of up to 50 mm.
