10 best gas heaters of various types

Infrared ceramic gas heaters

Infrared heaters are designed to provide heat not to the entire room, but only to a small area of ​​it. With this device you can heat an object, for example, boil a kettle or cook food. The temperature in the room where the device is operating rises, but this happens very slowly. If you need to provide heat to the entire room, it is better to choose a different type of heater. An infrared heater is more suitable than others for open spaces. The temperature of the heating element can reach 800 degrees. The efficiency of the infrared device exceeds 80%, and the power is 1200-4200 W.

Advantages

An infrared heater usually weighs little, so it is easy to move from place to place. It doesn't dry out the air too much. Such equipment can be placed on the floor, wall or ceiling. This type of heater can be installed outdoors. This unit costs less than all other types.

Flaws

The IR heater is not designed to heat a large space. It can only provide heat to a small area. It practically does not heat the air in the room.

Rating of the best infrared ceramic gas heaters

Pathfinder Hearth

Closed infrared burner with ceramic surface. The power is small - 1500 W, capable of heating a room of up to 15 square meters.

m. Weighs only 1800 g.

This gas ceramic heater is perfect for hiking and fishing.

pros

• compactness;
• light weight and size;
• mobility.

Minuses

• low power.

Hyundai H-Hg2-Ui686

Hyundai H-Hg2-Ui686 is a gas heater for a garage or cottage; it can also be used in open spaces, terraces, and non-residential premises. Runs on liquefied gas (propane).

It has two positions: horizontal and vertical. Thermal power – 2.9 kW.

pros

• two positions;
• compactness;
• mobility.

Minuses

• used only in non-residential premises and open spaces.

BALLU BIGH-3

BALLU BIGH-3 is a floor-type infrared gas heater. The body is covered with enamel, which increases the service life of the device.

The efficiency is very high, close to 100%. An excellent option for summer residents or tourists.

The grille is made of durable stainless steel. If the flame dies out, the thermocouple blocks the gas supply.

If water gets on the device, the heating panel will not be deformed. Thanks to its convenient collapsible design, the device is easy to take on a trip or hike.

Operates from mains or bottled gas. The device is suitable for heating or cooking food.

pros

• light weight (2.7 kg);
• collapsible design;
• quality materials;
• high efficiency;
• low price;
• Includes hose (1.5 meters), jets, gas reducers.

Minuses

• low power.

Kovea Fire Ball KH-0710

Portable gas heater for a summer house, equipped with a hose. Perfect for tourism, winter fishing, and can warm up a tent.

Allows you to boil water, so you don’t have to take a thermos with you. Ignites using piezo ignition.

The reflector can be adjusted to an inclined or horizontal position. In the first case, the device will serve as a heater, in the second – a place for heating or cooking food.

In both positions, the reflector is secured with a bolt, so the device will not tip over or tilt. If the temperature is low, the system preheats the gas.

The model is powered by a gas cylinder.

pros

• piezo ignition;
• compactness;
• versatility;
• 2 positions.

Minuses

• price;
• low power.

Solar gas GII 2.9

Solar gas GII 2.9 is a gas infrared burner.

Designed for local heating of premises. Can be used as a stove for heating or cooking.

During painting work, the device can dry surfaces. Thanks to the German Raushert ceramic emitter, the burner will last a long time.

pros

• reliability and durability;
• uniform flame distribution;
• high efficiency;
• mobility;
• low gas consumption;
• uses propane - an inexpensive type of fuel;
• silent operation;
• no open flame;

Minuses

• ignition is manual.

How to choose a good gas heater?

We will conditionally divide gas heaters into three types - portable, portable and stationary . We will divide according to the type of power supply - a compact gas cylinder (threaded or collet) for portable models, connection with a hose to the main line, gas holder or cylinder for portable ones (naturally, the design and weight itself must imply the ability to be carried), a natural gas main line or a cylinder for stationary ones, either too heavy to carry, or purely physically mounted somewhere.

Portable gas heaters , so beloved by fishermen, hunters and tourists, should be assessed by the reliability of installation (especially on uneven surfaces) and the quality of gas heating, both of these parameters being closely related. After all, a heater that has fallen on its side may also begin to spit out an open flame if the liquid phase entering it from the cylinder when it is turned over does not evaporate - and this, you understand, is unsafe. If the heater has the ability to be used as a hotplate, you have a bingo: with such a device you can both warm up and boil tea, and on larger models you can even fully cook food. However, keep in mind that versatility has a downside - a regular camping stove will boil water faster... but it won’t warm it either.

Portable gas heaters are more of a “dacha-garage” option. Their power is higher, and, therefore, the efficiency will already be noticeable in terms of gas costs - simple models with a metal mesh should be put aside, preferring “ceramics”, which will provide the same level of “infrared power” at lower gas costs and with a better resource . The main thing is not to forget that any infrared heater, including a gas one, heats the surfaces it is directed at, not the air - therefore, it is stupid to compare the power of infrared heaters with heat guns, which are much more effective for heating (but are also more voracious, and oxygen they “eat” only on the way). But the most important thing is that it is extremely desirable to cut off the gas when the flame goes out or overturns: you understand, no one will constantly monitor the heater at home and especially in the garage, and it is not difficult to accidentally touch it in the same garage. Saving on security is such a thing.

If we take a stationary heater , then first of all its thermal power is important, of course - it would be stupid to spend money on the heater itself, and then spend time and effort on installing it, only to discover that it doesn’t really warm up the room. Shutting off the gas when the burner goes out is mandatory here, and automatic re-ignition is desirable: however, “purely mechanical” models also have their advantages, which are less convenient to use, but can work in the most remote village, where even a cardiologist can read the oscillogram of the voltage in the socket will grab his head.

This is the overview of gas heaters for various conditions and locations. Of course, there are noticeably more worthy models. However, we tried to present you with the best examples that have successfully proven themselves to be the most reliable, efficient and safe.

Convector gas heater

Cold air entering the gas convector from the room is heated and comes out warm. Combustion products are removed through a special tube. A convection heater can be powered by a mains line or a cylinder. Changing the type of fuel occurs by changing the position of the switch.

Convector heaters include a gas gun. It is more powerful than a regular convector. There is no chimney, so it cannot be used for heating residential premises.

Advantages

The gas convector has high efficiency - more than 90%. It is easy to regulate the power using the control unit and thermostat.

Flaws

A ventilation system is required for a gas convector. Such a unit must be installed under a window; it requires a chimney. This type of gas heater is the most expensive.

Rating of the best convector gas heaters

Gorenje MORA 6150.1022

Gas convector air heater MORA 6150. 1022 from the Czech manufacturer Gorenje is intended for houses, cottages, cottages, offices and other premises.

The design of the model is simple, installing it is not difficult. The device heats the room very quickly.

Overheating of the upper part of the room is excluded. The device can maintain temperatures between 10-32 degrees.

Does not depend on electricity, runs on liquefied or natural gas. The control system is simple and intuitive.

The heat exchanger is made of double-sided coated steel and the burners are made of stainless steel. If the flame goes out, thanks to the thermal fuse, the convector itself will stop supplying gas and turn off.

Therefore, you can use the heater at night.

pros

• frost resistance;
• independence from electricity;
• You can use both natural and liquefied gas;
• safety;
• ease of operation;
• can be installed under the windowsill;
• closed combustion chamber;
• high quality that meets European standards.

Minuses

• price

Alpine Air DT-2000

The gas convector Air DT-2000 from the Turkish company Alpine has the same advantages as the above-listed models from this manufacturer. The gas heater is reliable, durable, safe and looks aesthetically pleasing.

The only difference between this model is the electric ignition system, powered by an AA battery. The flame starts with one simple press of a button.

pros

• aesthetic appearance;
• quick heating of the room;
• safety;
• high efficiency;
• durability;
• silent operation;
• compactness;
• runs on liquefied main gas;
• the system is not subject to freezing even if the heater is used irregularly;
• thermostat that maintains the room temperature at a constant level;
• the heater does not require piping or coolant, which significantly reduces installation costs.

Minuses

• Requires batteries for electric ignition.

Alpine Air NGS-40

Alpine Air NGS-40 is a durable, reliable gas wall heater. The heat exchanger is made of cast iron, which ensures a long service life.

The device is equipped with a reliable POLIDORO burner and SIT gas fittings. Suitable for home, office, warehouses or industrial premises.

Does not depend on electricity. The combustion chamber is a closed type, air comes from the street, so the device can be used even with closed windows or in rooms with poor ventilation.

Heats up the room quickly. The product is absolutely safe, since all combustion products exit through a special coaxial flue pipe.

pros

• quick heating of the room;
• high efficiency;
• durability;
• safety;
• silent operation;
• aesthetic appearance;
• compactness;
• also works on liquefied gas;
• the system is not subject to freezing even if the heater is used irregularly;
• turns on using the piezo ignition button;
• thermostat that maintains the room temperature constant;
• the heater does not require piping or coolant, which significantly reduces installation costs.

Minuses

• price

Hosseven HP-3

The model has an interesting modern design. The body is made in black.

The front part is made of impact-resistant and heat-resistant glass, through which you can see a beautiful blue flame. Externally, the heater resembles a fireplace.

The combustion chamber is closed type. Thanks to this, the air in the room remains clean, and the efficiency inside the device remains high.

The heat exchanger is made of steel, the fins are developed. This ensures the best heat transfer.

Using the built-in thermostat, the temperature is maintained at the same level. The heater is stationary.

To install it you need to make a hole in the wall. One of its main advantages is its versatility in fuel.

RZ-3 works well on both liquefied bottled gas and natural gas. This allows you to install the unit even in the countryside.

The heating power is 2700 W.

pros

• safety;
• stylish, pleasant appearance;
• conversion to different types of fuel;
• fast heating.

Minuses

• high price.

Alpine Air NGS-20F

Alpine Air NGS-20F is a gas heater for a home or apartment. Wall mounted.

The cast iron heat exchanger is designed to last 50 years. The device works perfectly even at very low temperatures.

There is a mains-powered built-in fan for faster heating. The combustion chamber is of the closed type.

The kit includes a coaxial tube for air intake and combustion products exhaust. It can operate both from network gas and from bottled gas.

pros

• the heat exchanger is made of cast iron;
• presence of a fan;
• reliability.

Minuses

• For installation you need to make a hole in the wall.

The best heaters for a cottage or garage

JAX JGHD-4200

It is characterized by small overall dimensions, but this small device is capable of efficiently warming up a room whose area can reach up to 60 square meters. It is worth noting that this design is not overly powerful - this figure varies from 1.5 to 4.2 kW. Due to its compact size, such a device can be easily moved from one place to another and transported in an ordinary passenger car. The heat source here is a special panel made of heat-resistant ceramics. The main advantage of such a burner here is that it continues to heat the air for some time after turning off the power.

At the same time, the resource of this part is unlimited; the main thing here is to follow all basic safety rules. This heater is equipped with all the necessary degrees of protection: it has a protective thermocouple that provides control over the flame level; when tipped over, the flame automatically goes out. The device is manufactured in two color options – brown and black. The heating panel is located under a protective grille made of stainless steel. The device runs on propane and butane. A plug-in standard 27-liter cylinder will be consumed for quite a long time – about 38 hours. Fuel consumption at maximum power is 310 grams of gas per hour. When installing indoors, remember that it must be ventilated periodically, as the device will burn oxygen. The warranty period for this device is 1 year.

Advantages:

• Small overall dimensions;
• The ceramic heating element does not dry out the air too much;
• Has a mandatory certificate in our country;
• Low gas consumption.

Flaws:

• Even though the device is quite compact, it will still require free space.

JAX JGHD-4200

Ballu BIGH-55

Able to cope with a room whose area can reach 60 square meters, it is well suited for rooms where there are interruptions in the power supply or there is no power at all. The model works on two principles - infrared and convective. This was possible to combine thanks to the use of the latest Fast Heat technology: this allows you to increase the heat transfer of the model by almost a third. The front part of the panel is made of high-strength ceramic materials - this helps to achieve a fairly long service life. The design looks original, so the heater will fit organically into any interior.

This product is made in Russia and has no analogues on the market in terms of price-quality ratio. Each product is fully tested for gas leaks in laboratory conditions. The design provides completely autonomous heating of the room. No power is required to operate, so the device can be installed almost anywhere. The scope of use of this heater is quite wide: it can be installed not only in garages and country houses, but also in various open areas. The heater's safety system is multi-level: the model is equipped with a protective thermocouple that controls the size of the flame, and a set of sensors to turn it off when tipped over. There is a special clamp that will hold the cylinder in place if it is necessary to transport or simply move the device. The design is original and quite strict. The device operates absolutely silently, so you don’t have to spend a lot of time and effort to connect.

Advantages:

• The gas cylinder is hidden hidden in the housing;
• The front panel has perforations, which will improve heat transfer;
• Reliability of manufacture and autonomy of operation;
• Convenient security system;
• Fixing the cylinder inside the body.

Flaws:

• If a forced convection system was installed, the operating efficiency would be significantly higher.

Ballu BIGH-55

1. Timberk TGH 4200 M1

The design is excellent for various unheated rooms where access to power supply is difficult or completely absent. The combustion of fuel occurs inside the ceramic plates; there is no open flame here. Largely due to this factor, gas is burned almost in full, this ensures high efficiency levels and a reduction in the percentage of harmful emissions. Such models operate on the infrared principle. The security system includes many sensors that turn off this equipment when emergency situations occur, but in the future you will have to turn it on only with your hands.

On the reverse side of the product there is a special fastener for installing a gas cylinder, the maximum volume of which is 27 liters. The highest operating power of the equipment is 4.2 kW, it runs on propane and butane. There are three power levels, they are adjustable in steps - 1.4, 1.8 and 4.2 kW. Gas consumption when reaching the highest power will reach 300 grams per hour. The heater can handle a room up to 45 square meters. At the same time, the product is not too heavy - its weight is only 10 kg, which is significantly lower compared to other models in our review of the best gas heaters.

More: Top 10 best adhesives for porcelain tiles, how to choose adhesive for porcelain tiles

Advantages:

• Excellent efficiency;
• Good security system;
• High quality manufacturing;
• Long service life.

Flaws:

• A little expensive compared to similar models.

Timberk TGH 4200 M1

Catalytic gas heater

The average power of a catalytic heater is 2900 W. The gas mixes with the catalyst, resulting in heating. In this case, no hazardous substances are released. Reaches temperatures of 500 degrees. Some devices are equipped with heating elements and fans, so the heater can also operate on electricity. A catalytic heater costs more than an infrared heater, but less than a convector heater.

Advantages

When the catalytic heater operates, no harmful substances are released. Such devices are environmentally friendly and safe, which is why they are popular in European countries. No open flame, smoke or combustion products. Catalytic heaters are compact in size, do not depend on electricity and consume little fuel.

Flaws

The catalytic type heater is designed for a room with an area of ​​no more than 20 m2.

Which brand of gas heater is best to buy?

When compiling the TOP of the most successful heaters, you should definitely pay attention to the manufacturer. Still, each company that produces such equipment has certain advantages and disadvantages that it is advisable to take into account immediately. Therefore, it will be very useful for a potential buyer to understand the issue thoroughly. So, you certainly won’t be disappointed if you purchase products from companies such as:

• Ballu is a company from Hong Kong, whose offices are located in different countries - China, Japan, Korea, Poland and others. The equipment is characterized by efficiency, high quality and excellent design. Alas, you can't call it cheap.
• Timberk is a very serious Scandinavian company. It specializes specifically in climate control equipment, producing equipment that may not be innovative, but is quite high-quality and not too expensive.
• Hyundai is a South Korean company that primarily produces cars, but also offers a line of good heaters. Their main advantages include durability and ease of use.
• Bartolini is an Italian company founded in 1984. Can offer an extensive line of quality heaters. Yes, it's not cheap. But safety is always at its best, and Italian design is worth a lot, according to most users.

So, you can see for yourself that the choice of companies producing gas heaters is quite large. However, it is not only these companies that produce high-quality equipment. We will try to talk about the most successful ones on the market.

Rating of the best catalytic gas heaters

Bartolini PULLOVER K Turbo Plus

Bartolini PULLOVER K Turbo Plus is a gas infrared heater equipped with a fan heater. Works on both gas and electricity.

Capable of providing heat to a room of up to 80 square meters. m.

In this model, the heating element is a catalytic panel made of fiberglass coated with a catalyst. Infrared rays do not heat the air, but the objects and people in the room.

The housing accommodates a gas cylinder with a volume of up to 27 liters.

pros

• runs on both electricity and gas;
• able to warm up a large room;
• “gas control”;
• “CO2 control” (the device will turn off if the concentration of carbon dioxide in the air is higher than normal);
• shutdown when falling or tilting;
• the cylinder is hidden in the housing behind a plastic casing;
• oxygen level sensor;
• wheels for moving.

Minuses

• price

GIM2-01

Budget gas heater, infrared burner GIM2-01 made in Russia. Very light, the weight of the device is only 1 kg.

The catalytic heating element is made of microporous ceramic. The panel reaches a temperature of 800 degrees.

The CO content in the gas mixture is very low, no more than 0.02%.

pros

• compactness and lightness;
• low price;
• low CO content in the gas mixture.

Minuses

• low thermal power (750 W);
• operates only on liquefied gas (propane).

Argo burner

“Argo” is an inexpensive gas infrared burner. Made in Russia, Yoshkar-Ola.

The catalytic heating element is made of fine-pored ceramics. This model can be connected to both main and bottled gas.

The housing contains a gas-air mixer. It maintains the optimal composition of the gas-air mixture.

This increases heat transfer during combustion. The CO content in this heater is very low.

The kit includes a hose, 2 clamps and a replacement nozzle for switching from one type of gas to another, as well as a product data sheet.

pros

• low price;
• can run on liquefied or natural gas;
• compact;
• easy.

Minuses

• low power (2900 W).

Bartolini Pullover K

This catalytic heater operates on a gas cylinder with a capacity of 5, 12, 27, 50 liters. Perfect for rooms where there is no central water heating, such as a garage, cottage or utility room.

But the Pullover K heater can also be used in residential areas, because it is absolutely safe. The device is equipped with “gas control” and “CO2 control” sensors, and a tilt shutdown system.

If the flame is higher than normal, the “gas control” will turn off the heater automatically. Equipped with piezo ignition.

pros

• “gas control”;
• “CO2 control” (the device will turn off if the concentration of carbon dioxide in the air is higher than normal);
• shutdown when falling or tilting;
• the cylinder is hidden in the housing behind a plastic casing;
• oxygen level sensor;
• wheels for moving.

Minuses

• low power (2900 W);
• designed to heat a room only up to 35 sq.m.

Bartolini Pullover I

An absolutely autonomous, powerful and reliable gas heater from the Italian manufacturer Bartolini Pullover I will warm a room up to 60 square meters. m.

It has piezo ignition, a ceramic infrared panel, a thermal power switch, and a gas control system. The gas heater operates from a cylinder with a valve, with a volume of 27 liters.

Maximum thermal power – 4200 W. Equipped with rollers.

The kit includes two clamps, a gas hose and a reducer. For a gas cylinder, a compartment is provided in the device body, closed with a plastic casing.

pros

• 3 burner modes;
• gas control;
• piezo ignition;
• wheels;
• When dropped or tilted, the device turns itself off.

Minuses

• Works only on a certain type of cylinder.

Street products

Master Leto ML-5

The device is available in several colors and operates on the principle of infrared heating, which makes it very suitable for use in outdoor conditions - verandas, terraces, cafes, and so on. The case is high quality and reliable, retaining its original appearance for a long time. Products from this company have been on the market since 2003, and during this time they have proven themselves to be extremely reliable. The manufacturer provides a long warranty for its products - as much as 3 years. The product is made in the shape of a pyramid, perfect not only for additional heating, but also for lighting.

Such a device emits a soft and slightly fluctuating glow, which, in turn, allows you to create a comfortable environment and evoke a feeling of comfort. The largest heated surface area is 4 meters in diameter. The body is made of reliable polished steel, coated with powder paints, and is ignited using piezo ignition. The glass bulb acts as the main heat emitter here. The height of this lamp is 2.25 m, the power rating is from 4 to 8 kW. The design can use liquefied propane or butane, the consumption is not very high: it can reach a maximum of 0.87 kg per hour. The lamp itself weighs 24 kg and is quite stable, so you won’t be able to accidentally drop it or move it while passing by. It is permissible to install a cylinder with a volume of 27 liters; the lamp will completely use it up within 31 hours of continuous operation at full power.

More: Top 10 varieties of cherry tomatoes

Advantages:

• Smooth power adjustment;
• Very beautiful appearance;
• Decent heated area;
• A thermocouple is installed that will shut off the gas supply in case of attenuation;
• Easy to use, easy to connect;
• Wide base provides excellent stability.

Flaws:

• The kit could include a stabilization container and legs for fixing to the floor.

Master Leto ML-5

NEOCLIMA 09HW-B

The gas model for outdoor use is housed in a high-quality stainless steel case, which will retain its original appearance for quite a long time - it will not have to be repainted. It is quite enough to periodically clean the surface of the heater from dust and other accumulated contaminants. This can be done with an ordinary damp cloth or use detergents, but the manufacturer does not recommend using abrasive materials. The power of the equipment is very high, as evidenced by the decent range of the device - it reaches 5 meters, it will not take time to reach operating temperature.

If the air temperature has not yet completely dropped, then you can use a special smooth adjustment to change the power indicator. To turn on the heater, just press the piezo ignition button. The heater can be used for a long time without causing any danger to users. The model is equipped with a number of sensors, including flame control and a sensor that protects against overheating. There is another sensor - a fall; if the device is tilted at an angle of 45 degrees, the emergency protection system will work, which will turn it off. You can connect almost any cylinder, but under the body there is space for a product with a volume of 27 liters.

Advantages:

• Simplicity of the device;
• Long service life;
• High quality materials;
• Absolute safety of use.

Flaws:

• It is difficult to remove the protective film that covers the heater body.

NEOCLIMA 09HW-B

Aesto A-02

The device is housed in a mushroom-shaped case and has a very beautiful appearance. This is a modern design, which is designed exclusively for use outdoors - in the garden, on the lawn, in open areas of cafes and restaurants. It appeared on sale not too long ago, but due to the presence of a large number of useful characteristics, these models have become quite attractive. The body of the product is made of high quality stainless steel. The heating element is very reliable and absolutely safe. This design is perfect for areas with high humidity levels; the user will not have to worry about its performance if precipitation suddenly begins.

The heater is designed quite simply; if necessary, it can be quickly disassembled, it is not too heavy, and there are wheels at the base for moving around the site. When disassembled, it will fit even in a small car trunk. The device easily heats surrounding objects; its operating area is 25 square meters. The product can be used at any time of the year. The device is designed to operate on bottled gas - a cylinder with a volume of 27 liters is placed in the rack. Fuel consumption is economical: one gas refill is enough for approximately 30 hours of continuous operation. The heating power ranges from 5 to 13 kW.

Advantages:

• High level of power at an affordable price;
• Special attention is paid to safety - not a single element is heated, so people cannot get burned;
• The weight of the device is only 17 kg;
• Easy to install, disassemble and transport;
• Attractive appearance.

Flaws:

• A gas cylinder is not included with this product.

Aesto A-02

Ballu BOGH-15

This is truly the best model, which is designed for use directly in open air conditions. The set of operational characteristics here is optimal, the model is simple and convenient to use. Largely thanks to these properties, this heater was able to take the leading position in our rating. At the same time, it is not only functional, but also quite effective, and also meets all the necessary requirements in the field of safety and environmental friendliness of operation. The heater is started using the electric ignition button, which is located directly on the body of the model. In a glass flask that is resistant to high temperatures, the flame height can be about one and a half meters.

The principle of operation is the same as that of the other models that are included in this section of our rating of the best gas heaters of the year. The maximum heating radius is 3 meters with a heating area of ​​about 28 square meters. The device is absolutely safe to use. Its design includes several sensors that will turn off the gas supply if an emergency situation occurs. Metal surfaces will not heat up to extremely high temperatures, so it will simply be impossible to get burned on them. The pyramid is positioned steadily; there will be a gas cylinder at its base. The weight of the lamp is 40 kg, there are several wheels at the bottom, and the turned on heater looks very impressive.

More: Top 10 best bathroom sinks

Advantages:

• Very stable pyramidal structure;
• Many sensors are responsible for the safe operation of the heater;
• Beautiful appearance, which will look even more impressive in twilight and darkness;
• Excellent build quality.

Flaws:

• You will have to install wheel chocks.

Ballu BOGH-15