TOP 15 best pumps for a well: rating 2020-2021 and which centrifugal pump to choose for water supply at home

Well pumps are used in private areas to automate the intake of water from a well to provide all household needs. But what should you consider when choosing such a device?

Which manufacturers have proven themselves to be the best?

Which well pumps are highly rated by experts and buyers?

We have compiled our own rating of the most popular models in terms of price/quality ratio, taking into account their technical features, advantages and disadvantages.

Rating of the TOP 15 best pumps for wells 2020-2021

How to choose a well pump for water supply at home?

When choosing a pump for your well, you should consider the following parameters:

1. Productivity . The main indicator that gives you an idea of ​​the amount of water to pump under ideal conditions. This also allows you to determine how many points the pump can be connected to.
2. Depth . Indicates from what depth in the well the pump will draw water. Focus on the depth of your well/well.
3. Maximum pressure . The characteristic indicates to what height and distance the pump is capable of supplying water from the well. This takes into account the depth of immersion and the distance of the feeding point from the device itself.
4. Filter . Before purchasing, be sure to assess the degree of contamination of the water in the well. There are pumps that are resistant to mechanical impurities, and there are models designed only for clean water.

TOP 5 best well pumps by price/quality for 2021

Grundfos SBA 3-45 A

Italian well pump with thoughtful functionality and good power of 1050 W.

The pump is very easy to install, all control elements are located inside the housing, so to get started you just need to connect the device to the network.

The mechanism stops immediately after the pump reaches the required pressure . When the latter falls, the pump is activated again. The manufacturer indicates that when installing a hydraulic accumulator, you can get a full-fledged pumping station.

The device managed to provide all the necessary protection, including protection against overheating and dry running.

And thanks to the float switch, the device will turn off if the water level drops to critical.

To make the unit lighter and cheaper, the body was made of composite material.

At the same time, the brand did not skimp on the internal mechanism. For example, both the input filter and the electric motor sleeve were made of stainless steel.

Main characteristics:

1. Immersion depth, m - 10.
2. Pressure (max), m - 45.
3. Throughput, cubic meters m/hour - 3.
4. Power - 1050.
5. Passable particles, mm - 1.
6. Maximum temperature - 40 degrees.
7. Noise level - 50 dB.

pros

• a complete protection system;
• good performance;
• low noise level.

Minuses

• outlet fitting made of plastic.

Aquario ASP2-25-100WA (620 W)

The model refers to submersible pumps for vertical installation to pump cold water from wells, open sources or wells with a diameter of at least 15 cm.

Recommended for private water supply systems. Immerses to a maximum of 15 meters, the pressure does not exceed 40 meters. Filters well, not allowing particles larger than 0.5 mm in diameter to pass through.

The housing is made of stainless steel, as are the main elements of the engine . There is no special cooling system; during prolonged operation, the temperature of the engine is reduced by a jet of water.

But protection against dry running is provided by installing a float switch that controls the water level in the well/source . Use in shallow sources with partial immersion of the body is also allowed.

Main characteristics:

1. Immersion depth, m - 15.
2. Pressure (max), m - 40.
3. Throughput, cubic meters m/hour - 3.
4. Power - 620 W.
5. Passable particles, mm - 0.5.
6. Maximum temperature - 35 degrees.
7. Noise level - 56 dB.

pros

• does not make noise during operation;
• good performance indicators;
• reliable engine design;
• cable for 20 meters and a remote-type starting block.

Minuses

• not suitable for deep sources.

DAB DIVERTRON 1200 M (1100 W)

The unit is capable of supplying water to a private home even from a deep well . For 45 meters

he gains 10 liters per minute of ascent, and with a ten-meter rise he can manage more than 80 liters. The work is carried out independently due to built-in automation.

There are built-in pressure and flow sensors.

Stability is well ensured even with changes in water consumption, so installing a hydraulic accumulator is not a mandatory item.

Do not be afraid of the engine overheating during prolonged operation; it is cooled by the flow of water.

However, this well pump also has disadvantages.

When creating the model, much more plastic was used than we would like, and the pump does not tolerate voltage drops well, so you should take care of the stabilizer in advance.

Keep in mind that the manufacturer did not install a float switch, so the level must be monitored.

Main characteristics:

1. Immersion depth, m - 12.
2. Pressure (max), m - 46.
3. Throughput, cubic meters m/hour - 5.7.
4. Power - 1.1 kW.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 64 dB.

pros

• good performance, suitable for deep wells;
• reliable pumping part;
• stable operation of automation.

Minuses

• does not react well to power surges;
• a lot of plastic parts.

GILEKS Water cannon PROF 55/75 A (900 W)

One of the best centrifugal well pumps in our rating for its performance.

Made to provide a private home with clean drinking water from a well, borehole or natural source.

The maximum pressure reaches 75 meters, and the pump can be immersed to a depth of thirty meters.

This well pump can be equipped not only with an automated water supply system, but also with a watering or irrigation system.

Another feature of this model is that it can pump water even from those sources where the suspended sand content is estimated at two kilograms for every cubic meter of liquid.

All heated engine elements are protected from overheating and subsequent wear by a stream of water washing them. Thanks to this, the pump also does not submerge completely.

Main characteristics:

1. Immersion depth, m - 30.
2. Pressure (max), m - 75.
3. Throughput, cubic meters m/hour - 3.3.
4. Power - 900 W.
5. Passable particles, mm - 1.5.
6. Maximum temperature - 40.
7. Noise level - 57 dB.

pros

• excellent performance;
• quiet operation;
• reliable design that is not afraid of overheating;
• Can be used in sources with high sand content.

Minuses

• not detected.

VORTEX VN-15N (280 W)

Well pump for top water intake, with small size and high quality aluminum alloy body.

It has a pressure of up to 72 meters, a vibration operating principle and produces up to 18 liters per minute, so this pump is perfect for watering, irrigation and other household needs in a summer cottage or garden.

Reliable assembly indicates a long service life . The unit is designed to work with clean water without a high content of sand and other mechanical impurities.

There is good motor overload protection, and special holes at the bottom provide access to the motor for cooling.

The pump is immersed in a well or borehole with a diameter of 10 cm to a depth of no more than three meters.

To make it convenient to raise and lower the device, it was equipped with special ears for threading the cable. One of the obvious shortcomings is that the manufacturer did not take care of protection against dry running.

Main characteristics:

1. Immersion depth, m - 3.
2. Pressure (max), m - 72.
3. Throughput, cubic meters m/hour - 1.08.
4. Power - 280 W.
5. Passable particles, mm - 1.5.
6. Maximum temperature - 35.
7. Noise level - 57 dB.

pros

• excellent option for watering;
• low noise level;
• good pressure.

Minuses

• no protection against dry running;
• The bolts rust quickly and require regular replacement.

The best submersible well pumps for water supply

To provide your home with clean well water, you need a powerful pump. It must not only raise a column of water from the depths, but also pump it throughout the entire water supply system. Most often, a hydraulic accumulator is additionally installed, which allows you to have a certain supply of water. Thanks to this, the pump turns on less often, but runs longer. Experts have selected several good models.

Pedrollo NKm 2/5

Rating: 4.9

The Italian well pump Pedrollo NKm 2/5 successfully combines such important parameters as powerful pressure (90 m), large immersion depth (20 m) and good throughput (4.8 cubic m/h). It was for its versatility of use that experts gave the model first place in the rating. The manufacturer has equipped its product with vibration-isolating supports, an automatic inlet valve, and sensors for monitoring the presence of water. The high price is due to the exceptional quality of the materials used. Most of the parts, including the body, are made of high-quality stainless steel (AISI 304).

The engine can run for a long time without overheating. The user can regulate the water flow using a special valve. Domestic homeowners have no particular complaints, except for the high price.

Advantages

• powerful pressure;
• quality materials;
• precision assembly;
• rich functional content.

Flaws

• high price.

TOP 5 best inexpensive well pumps

PATRIOT VP-10 (300 W)

This unit belongs to submersible pumps with a vibration operating principle . Counts,

that it can be used in shallow wells, containers, natural springs, immersing no more than seven meters.

In this case, the maximum pressure of 30 meters is maintained.

However, many users indicate that the pump can be immersed 10-15 meters, losing half the volume of maximum pressure.

An excellent assistant for creating a watering or irrigation system, since in a horizontal position water is pumped over long distances.

There is protection against engine overheating and accidental dry running when the level in the well/barrel/source is not sufficient.

The body of the device is made of stainless steel, so the service life is much longer than that of similar pumps with a predominance of plastic.

Main characteristics:

1. Immersion depth, m - 7.
2. Pressure (max), m - 30.
3. Throughput, cubic meters m/hour - 1.08.
4. Power - 300 W.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 54 dB.

pros

• well suited for watering or irrigation;
• dives to 10-15 meters;
• low power consumption.

Minuses

• short power cord.

KARCHER BP 1 Barrel (400 W)

This model for a well can be considered as a modern alternative to the classic method of irrigation.

Using this pump, you can water the beds with settled warm water (including rainwater), but without tiring travel with a heavy watering can.

The pump is equipped with a special flexible mount that will hold it on the edge of the well and is compatible with any container.

The kit also includes a float switch so you don't have to monitor the level yourself.

The float switch allows you to control the water supply and in this way protects the internal mechanism from dry running.

During long-term operation, the engine is cooled by a stream of pumped water.

The user can install the mount at the desired height of the container, from where water will be pumped. Users recommend using this device in conjunction with a barrel or vat.

Main characteristics:

1. Immersion depth, m - 7.
2. Pressure (max), m - 11.
3. Throughput, cubic meters m/hour - 3.8.
4. Power - 400.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 57 dB.

pros

• very light, made of high quality plastic;
• does not irritate with noise during operation;
• excellent option for watering.

Minuses

• The bottom filter is loose.

LIVGIDROMASH Malysh BV-0.12-40-U5 10 m (240 W)

Vertical well pump with vibration mechanism.

Manufactured at a former well-known site, designed for placement in deep wells.

One of the most inexpensive models for a well with the simplest device, so you will have to monitor the water level and engine overheating yourself.

On the positive side, it is a small, compact device with a powerful winding (much better than previous models) and low power consumption.

This option is unlikely to be suitable for a private house, but for a dacha it is an excellent option. It pumps liquid well over long horizontal distances, which means it is suitable for irrigation. Not picky about mixtures.

At maximum performance, the pump provides up to 25 liters per minute . A well-assembled case will last for many years if the operating rules are followed.

Main characteristics:

1. Immersion depth, m - 3.
2. Pressure (max), m - 40.
3. Throughput, cubic meters m/hour - 1.5.
4. Power - 240 W.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 55 dB.

pros

• the best budget option for watering;
• reliable design;
• good performance;
• low power consumption.

Minuses

• Vibration decoupling of the mount is required due to significant vibration.

UNIPUMP BAVLENETS BV 0.12-40-U5, 40m (245 W)

Reliable model with excellent performance, stainless steel body and small size.

Suitable for placement in sources with a diameter of at least 10 centimeters, works with clean drinking water.

The pump can be submerged to a depth of 40 meters, and the maximum pressure reaches 80 meters . More than 1.5 cubic meters are produced per hour. meters of drinking liquid.

At the same time, the energy consumption of the device is minimal; it can be connected to solar or gasoline generators with a power of 0.5 kW or more.

The coils have copper windings, which reduces engine heating . The aluminum alloy body is corrosion-resistant, which means the pump will last a long time.

The manufacturer makes all rubber parts from natural rubber, so no harmful substances or impurities get into the water.

For ease of installation, the pump is equipped with eyes for attaching a cable.

Main characteristics:

1. Immersion depth, m - 40.
2. Pressure (max), m - 80.
3. Throughput, cubic meters m/hour - 1.6.
4. Power - 245 W.
5. Passable particles, mm - 0.5.
6. Maximum temperature - 35 degrees.
7. Noise level - 56 dB.

pros

• light weight and size;
• high-quality assembly;
• high performance;
• power cord 40 meters;
• low energy consumption.

Minuses

• not detected.

GILEKS Water cannon PROF 55/35 (460 W)

Submersible model for placement in both natural and artificial sources with sufficient water level.

Suitable for working with sand-filled wells, a special bottom filter does not allow fractions larger than 1.5 mm to pass through, that is, the pump pumps water containing several kilograms of sand in suspension without harming itself.

This pump is suitable for irrigation and other household needs . However, the internal elements are also suitable for use with drinking water.

The model is not a noisy device and is quite economical in terms of energy consumption.

The maximum pressure is 35 meters, immersion is carried out up to 30 meters . The case is made of stainless steel, resistant to impact.

This pump will last a long time. And thanks to a ten-meter cable, it is often possible to refuse to use an extension cord.

Main characteristics:

1. Immersion depth, m - 30.
2. Pressure (max), m - 35.
3. Throughput, cubic meters m/hour - 3.3.
4. Power - 460 W.
5. Passable particles, mm - 1.5 mm.
6. Maximum temperature - 40 degrees.
7. Noise level - 60 dB.

pros

• low noise level during operation;
• long cable;
• pumps quickly at great depths;
• not afraid of sand.

Minuses

• not detected.

TOP 10 best well pumps for water supply to a private home

Sooner or later, most owners of private houses or summer cottages face the need to purchase a well pump. The difficulty is to find a high-quality device suitable for yourself from the variety of copies available on the market.

This review is aimed at providing as complete information as possible about the 10 best quality pumps, giving them a detailed description, technical characteristics, features, pointing out the pros and cons, and also providing information on the average price.

BELAMOS BV-0.12 10 m

Small in size, universal well pump of vibration type, designed for irrigation of garden plots, pumping out liquids from flooded premises, cellar and basement type, water supply for residential premises and other needs. In its design, it is a membrane with two cavities (one with water, the other with a vibrating motor), enclosed in an impact-resistant metal casing.

Applies to submersible models. It descends into the selected source to a depth of 3 meters, but not lower than 50 centimeters from the bottom. Powered by a 10 meter long network cable. Equipped with overheating protection, which ensures a high level of wear resistance. It has a small capacity - only 0.43 cubic meters. m/hour, but the maximum pressure of the supplied liquid is quite good - 70 meters.

BELAMOS BV-0.12 10 m

• The presence of thermal protection.
• Good pressure.
• Easy to use.
• Good build quality and components.

• Short power cord.
• High noise level.

VORTEX VN-25V

The most inexpensive submersible pump for a well with a vibration mechanism for lifting clean liquid with a temperature of no more than 35 degrees. It takes water from a depth of up to 3 meters and delivers it to a height of 72 meters. This pump has a lightweight, IPX8-rated aluminum body that is secured with a durable cable before submersion.

The length of the power cord is 25 meters allowing you to work without the use of additional adapters/extensions. The device can be installed in both horizontal and vertical positions. Its performance is average, it will be quite enough to complete the tasks assigned to it.

VORTEX VN-25V

• Low price.
• Lightweight yet durable aluminum body.
• The length of the network cable is 25 meters.
• Convenient fixation of the pump to the cable for lowering and lifting.
• High water pressure when supplied.

• Service life according to the instructions is 3 years.

BISON ZNVP-300-10_M2

A well pump, which is effectively used for servicing the dacha area and supplying it with clean water. It has a simple, understandable design that does not require maintenance during operation. Thanks to the upper location of the suction fitting, the device does not capture dirt and debris that is located at the bottom of a well, borehole or other reservoir.

Having similar parameters to other copies in this price segment, this vibration pump stands out:

• High build quality.
• Reduced energy consumption.
• Performance equal to models consuming over 300 W of energy.
• Resource of continuous, uninterrupted operation up to 200 hours.
• The presence of a three-core wire, providing first-class protection, copper wire in the stator winding.
• The membrane material is high quality food grade rubber.
• Waterproofing of all electrical components.
• Built-in check valve that prevents water from draining from the main line.

Due to these features, such a unit is considered high-quality, reliable, and safe.

BISON ZNVP-300-10_M2

• Easy, vertical installation.
• High quality build.
• Power consumption is only 225 W.
• There are two loops for hanging the pump on a rope.
• 5 years warranty.
• Copper component in the stator winding.

• A very thin, fragile cord for hanging equipment.
• The wire for connecting to the network is short - only 10 meters.

LEPSE Aquarius-3 16m

Another representative of Russian production in the budget price category. This pump is suitable for lifting water from deep reservoirs, as well as for pumping it out when flooding small basement-type areas. It is produced in a two-component case: one part is aluminum, the second is durable, wear-resistant plastic. The service life declared by the manufacturer is 6 years.

Equipped with a built-in thermal switch, i.e. does not work if an emergency situation arises: a hose has broken/kinked somewhere, there is no water in the source from which the pumping takes place, the hydraulic chamber is clogged. In general, it is used for clean water applications, but is capable of functioning as a cleaning mechanism for wells. It descends to a depth of 3 meters using a special cable included in the kit.

LEPSE Aquarius-3 16m

• Protection against overheating and other emergency situations.
• Unpretentious in maintenance.
• Does not make much noise during operation.
• Wear-resistant, high-quality parts.

• Chinese counterfeits are common.
• It does not remove all the water from the bottom - about 2-3 cm remains.

KARCHER BP 1 Barrel

Plastic, surface pump for a well from a well-known German brand for watering gardens and vegetable gardens on your own site. Water for these purposes can be taken from any container to which it is attached using a holder. As a rule, the amount of liquid in the container should not exceed 7 meters. The device is equipped with:

• Built-in filter that prevents dirt from settling.
• Length-adjustable hose.
• A float valve that prevents the device from operating in the absence of the required amount of liquid, protecting it from damage.
• Ergonomic handle for comfortable use.
• Dry running sensor.

The maximum permissible temperature with which the device can be operated is 35 °C. The height of the supplied jet is small - it reaches 11 meters, and the throughput is 3.8 m³ per hour.

KARCHER BP 1 Barrel

• Convenient fixation to the container using a bracket.
• Highly durable plastic.
• German quality.
• Protecting the motor from sand and other debris that gets in with water.

• High fluid consumption.

GILEKS Water cannon PROF 55/50 A df

A Russian installation that allows water to be supplied from wells from a depth of up to 30 meters in several directions at once (up to five): for irrigating beds, trees in the garden, water supply to residential buildings, supply of drinking water. The pump components are made of environmentally friendly materials, protected by a durable waterproof stainless steel housing.

The engine is protected by a special fine mesh filter, thanks to which debris of various sizes cannot get into it. The built-in cooling system will prevent the device from stopping due to overheating of the motor and limit the number of required breaks. A float switch is responsible for the operation of the device when the liquid level in a well or well decreases.

GILEKS Water cannon PROF 55/50 A df

• Large depth for liquid collection.
• Suitable for supplying drinking water.
• The steel, high-strength body is not subject to corrosion.
• The presence of a system cooling the engine and a float valve.
• Possibility of simultaneous servicing of up to five points.

• The pressure of the pumped out and supplied liquid is weak.

Aquario ASP2-25-100WA

Submersible well pump with bottom water intake to provide water communications in areas without central water supply. Exceptionally pure liquid is pumped out from a relatively shallow depth of 15 meters. The device is reliable, made of steel with anti-corrosion properties. The motor is located in the upper part of the entire structure, its cooling is carried out by the liquid passing through the pump.

It is equipped with a 20-meter power cord, which gives it the ability to work at a decent distance from the outlet. Attaches to the tank vertically, horizontally and even at an angle. Can be fixed in water even halfway. It has protection against dry running, which reduces wear of parts, as well as an automatic control unit against overloads.

Aquario ASP2-25-100WA

• Small dimensions.
• Resistant to rust.
• Top placement of the engine in the housing.
• Several variations for securing equipment in a water storage tank.

• Complicated connection process.
• Due to the return valve, water is constantly retained in the line.

GARDENA 5500/3 Classic

This model refers to submersible pumps that allow you to pump water from deep wells or boreholes. Taking liquid from a depth of 13 meters, it provides a good supply level of 30 meters. The equipment can work with clean or slightly contaminated water used to moisten foliage and soil. In addition, it can be used for other technical needs.

This pump has a low noise level and good power, providing it with a high throughput capacity of 5.5 m³ per hour. Due to the quality of its components, it is protected from all kinds of damage and can remain in the water for a long time. Steel filtration meshes ensure that the mechanism is cleaned from sand and other small particles. The motor, in turn, is equipped with a thermostat. This helps it turn off when it gets too hot.

It is also equipped with a built-in check valve that will prevent liquid from leaking when the device is turned off. The three-stage wheel of this specimen makes it possible to quickly and quietly distill the required amount of water masses to meet certain needs.

GARDENA 5500/3 Classic

• High performance.
• Steel filter for purifying the supplied water from dirt.
• Presence of a check valve.
• IPX8 waterproof rating.
• Cable for fixing, immersing, lifting pumping equipment included.

• Weak cable for connecting to the network.

Grundfos SB 3-45 A (1050 W)

A good pump for a well, including a float switch and a mesh filter for water purification. Pumps liquid from various reservoirs with high efficiency to meet customer needs. In all its parameters and characteristics, it is practically no different from other devices considered in this rating.

The main differences are the high power consumption of 1050 W and the price category. The advantage of purchasing it is that it works quietly, is made of anti-corrosion composite materials, is protected from overheating, has small dimensions, is used for processing liquids up to +40 degrees, and is made in Italy.

Grundfos SB 3-45 A (1050 W)

• Automatic shutdown from dry running sensor.
• Silent.
• Easy to install and operate.
• Pumps water with temperatures up to +40 degrees.
• Reliable Italian assembly.

• Does not apply if the distance from the wall of the well, well or tank to the device is more than 15 meters.

DAB DIVERTRON 1200 M

The automatic well pump, made in Italy, has good performance (5.7 cubic meters per hour), the highest power consumption is 1100 W. Purchased for use in wells and other containers with a diameter of 6 inches or more. The composition of the liquids used must be similar to water.

The body, wheels, diffusers are made of temperature-resistant technopolymer, the remaining elements are made of stainless steel. It has built-in sensors that show flow and pressure levels, as well as systems that protect the device from operation without water and elevated temperature conditions. It can be completely submerged in water or halfway. The installation position is vertical.

DAB DIVERTRON 1200 M

• Multistage pump.
• High throughput.
• Fully automated equipment.
• A good package with no need for additional costs.
• Easy to use.

• High price.

TOP 5 best powerful pumps for wells

DAB DIVERTRON 1000M (650W)

This well pump model from an Italian manufacturer is very popular among owners of private houses, cottages and cottages..

No special accessories are required for installation, and the device is fully automated. A pump is used to pump clean drinking water.

The body is made of high quality technopolymer, and the main engine components are made of stainless steel.

This is how it was possible to reduce the weight of the model without sacrificing performance, which is estimated in the range from 0.3 to 5.7 cubic meters per hour. At the same time, the maximum jet pressure is 36 meters.

The pump is almost silent in its operation and is installed in wells with a diameter starting from 15 cm.

The device can also be used to organize irrigation or quickly pump water into the reservoir.

The entire system is protected from overheating, overload and dry running . For the latter, the pump was equipped with a float switch, which will prevent it from starting if the level is insufficient.

Main characteristics:

1. Immersion depth, m - 12.
2. Head (max), m - 36.
3. Throughput, cubic meters m/hour - 5.7.
4. Power - 650.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 57

pros

• lightweight but reliable;
• there is protection against dry running;
• good performance;
• low noise level.

Minuses

• does not tolerate power surges; installation of a stabilizer is required.

Grundfos SBA 3-35 A

The pump is manufactured in Italy and is designed for pumping clean water from wells for private water supply or from rainwater tanks/irrigation tanks.

It can also be installed to increase pressure in the water supply system, supply water for household appliances or watering/irrigation.

The well pump is equipped with a float switch for automatic operation . It can also be used as protection against dry running.

The model can be restarted using the remote control panel included in the package.

There is thermal overload protection.

If the engine elements overheat, the system will stop the pump to prevent damage.

After the temperature drops, the device will restart itself. In an hour, the pump can carry out up to 20 starts, pumping up to 3 cubic meters. In this case, the maximum pressure reaches 35 meters.

Main characteristics:

1. Immersion depth, m - 10.
2. Pressure (max), m - 35.
3. Throughput, cubic meters m/hour - 3.
4. Power - 800 W.
5. Passable particles, mm - 1 mm.
6. Maximum temperature - 40 degrees.
7. Noise level - 50 dB.

pros

• good protection system;
• high performance indicators;
• stainless steel body, which is not afraid of rust;
• quiet work.

Minuses

• short power cord.

GILEKS Water cannon PROF 55/50 A df (600 W)

We can safely recommend this model as a reliable well pump for providing water to a private home, cottage or garden..

In this case, the immersion depth reaches 30 meters. Thanks to the placed float switch, this pump can be placed in both natural and stationary sources where there is a sufficient water level.

The maximum pressure is 50 meters . The model works with a clean liquid, in which sand fractions with a diameter of 2 mm can be found. To filter them out, it is enough to install a bottom filter.

The model is resistant to various damages thanks to the case made of high-quality stainless steel.

All internal parts of the pump are assembled from elements that can come into contact with drinking water.

During long-term operation, the engine is cooled by the water that is pumped; there is protection against dry running and overheating.

The service life of the pump is significantly extended due to the double seal. And to make the model easy to install, the manufacturer has provided special lugs for threading the cable.

Main characteristics:

1. Immersion depth, m - 30.
2. Pressure (max), m - 50.
3. Throughput, cubic meters m/hour - 3.3.
4. Power - 600 W.
5. Passable particles, mm - 2.
6. Maximum temperature - 35 degrees.
7. Noise level - 60 dB.

pros

• long service life;
• There are both automatic and manual operating modes;
• for deep wells;
• long cord;
• pumps quickly.

Minuses

• not detected.

Aquario ASP2-40-100WA (750 W)

A high-quality, reliable well pump model that is used in private water supply systems.

Pumps clean cold water (up to 35 degrees) after placement in wells or wells with a diameter of 15 cm.

The pump can submerge to fifteen meters, with a maximum pressure of up to 70 meters, carrying out up to 30 starts per hour and pumping about 3 cubic meters.

The device operates almost silently and performs well when organizing watering or irrigation.

The sand content in water should not exceed 180 grams per cubic meter.

The housing and main parts of the motor are made of stainless steel and are wear-resistant, which allows the pump to be used for many years.

There is a float switch as protection against dry running, a remote control is also included, the length of the network cable is 25 meters. For high-quality operation, it is recommended to install a voltage stabilizer.

Main characteristics:

1. Immersion depth, m - 15.
2. Pressure (max), m - 70.
3. Throughput, cubic meters m/hour - 3.
4. Power - 750 W.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 54 dB.

pros

• good pressure;
• long cable for connection;
• works without noise;
• up to 30 starts per hour.

Minuses

• requires voltage stabilization.

GILEKS Water cannon PROF 55/35 A (460 W)

Another model from this manufacturer, designed for installation in wells and natural springs with clean water with a diameter of 150 mm or more.

The pump delivers up to 55 liters per minute, and the maximum pressure reaches 35 liters. The pump pumps 3.3 cubic meters per hour. meters, consuming no more than 460 W.

This pump is ideal for irrigation and watering, as it demonstrates good performance when pumping water horizontally and is not afraid of high sand content (up to 2 kg per cubic meter).

All thanks to the included filter, which protects the system from clogging even when the pump is installed at the bottom of the source.

The main parts of the engine are made of stainless steel; in case of overheating, the protective system stops the pump until it cools completely. There is also protection against overload or starting the pump when the water level is low.

Main characteristics:

1. Immersion depth, m - 30.
2. Pressure (max), m - 35.
3. Throughput, cubic meters m/hour - 3.3.
4. Power - 460 W.
5. Passable particles, mm - 2.
6. Maximum temperature - 35 degrees.
7. Noise level - 57 dB.

pros

• quiet operation;
• economical energy consumption;
• Suitable for deep wells.

Minuses

• short cable for connection.

The best submersible pumps for a well

As the name suggests, these pumps are designed to be fully or partially submerged in a body of water. Among them there are well and borehole models. Depending on the type chosen, the height of the water column varies from 9 to 200 m. Submersible pumps are characterized by high efficiency (compared to surface models) and the presence of a sealed housing.

They are usually equipped with a filter and automatic dry-running protection. Experts recommend paying attention to the presence of a float, which will turn off the power to the pump when the critical water level is reached.

Pedrollo NKM 2/2 GE – pump for wells with moderate energy consumption

5.0

★★★★★

editorial assessment

100%

buyers recommend this product

A productive and reliable pump that is capable of “digesting” water with minor mechanical inclusions up to 150 grams/1 m3 without harm. With a immersion depth of 20 m, the unit provides up to 70 liters of water, raising it by 45 m. This model can also work stably in networks with voltage drops.

Advantages:

• Reliability.
• Excellent performance.
• Stable operation in contaminated water.
• Low power consumption.
• The presence of a float switch.

Flaws:

• High cost - 29 thousand.

A very good model for organizing water supply for a private home. The main thing when using this pump is to take into account the flow rate of the well.

Water jet PROF 55/50 A DF – for pumping contaminated water

4.9

★★★★★

editorial assessment

97%

buyers recommend this product

See review▶

New this year is a submersible pump with impressive technical characteristics. When diving to a depth of 30 m, this unit is capable of delivering up to 55 l/min. to a height of up to 50 m. Dry running protection is provided by a float switch.

The main feature of the device is the floating design of the impeller. This technical solution allows pumping water with a solid content of up to 2 kg/m3. The cost of the unit is 9500 rubles.

Advantages:

• Good performance and pressure.
• Overheating protection available.
• Ability to work in water with a high content of mechanical impurities.
• The presence of drainage channels to reduce the load on the engine at start-up.

Flaws:

• No check valve included.

A good model for creating an automated water supply system at home. However, its construction requires additional elements and accessories (hoses, fittings, check valve, etc.) that must be purchased separately.

Karcher SP1 Dirt – silent model with low power consumption

4.8

★★★★★

editorial assessment

90%

buyers recommend this product

See review▶

A reliable submersible pump from a well-known German manufacturer is designed for a maximum productivity of 5.5 m3/h at an immersion depth of up to 7 m. The unit is equipped with a carrying handle, a patented quick connection system, and has the ability to operate in manual and automatic modes with a float switch.

The main feature of Karcher SP is the possibility of stable operation in turbid water with mechanical inclusions up to 2 cm in diameter. At the same time, the price of the device is quite low - 3300 rubles.

Advantages:

• High performance.
• No noise during operation.
• High quality build.
• “Digestion” of large mechanical inclusions.
• Extended warranty (5 years) from the manufacturer.

Flaws:

• The kit does not include an input filter.
• Large outlet diameter – 1″.

The extremely low pressure of 4.5 m indicates the narrow specialization of the device. It is suitable for watering the site, draining drainage wells and swimming pools.