Natural wear and tear on washing machine parts or manufacturing defects require intervention and troubleshooting. This makes it necessary to dismantle the cover of the device. Sometimes the top panel is removed when installing appliances into kitchen furniture.
- Which SMAs have the top cover removed?
- Removing the top cover of a front-loading machine
- Top Loading Models
- Nuances for some SMA models
- Catalog of washing machines with reviews
Which SMAs have the top cover removed?
If the washing machine breaks down, you can act in two ways:
- call a specialist;
- solve the problem yourself.
The advantage of doing it yourself is saving money. Most models of modern washing machines provide the ability to disassemble the upper part of the body.
This design feature is independent of the load type. The cover can be removed for both front-facing and vertical machines.
Top cover of SMA
If necessary, removing the cover of the device can be completed in half an hour. The only tool you need is a Phillips screwdriver to remove the bolts holding the panel in place.
Online diagnostics of a washing machine
If your machine stops washing or rinsing clothes normally, then some kind of malfunction or breakdown has occurred.
You can try to find the problem yourself. Run diagnostics
Select which operation your washing machine does not perform:
1. Doesn’t drain 2. Doesn’t rotate the drum 3. Doesn’t spin clothes 4. Noises, knocks, buzzes when spinning 5. Doesn’t turn on
Checking the operation of the drain pump Is the drain pump of the washing machine working? Yes No I don’t know << Back
Clogged hoses in the washing machine If the sound corresponds to the normal sound that has always been observed when the device is working, the cause is probably a clog.
Was there a blockage in the drain hose? Yes
<< Back
The drain pump does not work! If the sound matches the normal sound of the drain pump, it is recommended that you check the drain filter first.
After cleaning, does the drain pump work and does the washing machine drain water? Not really
<< Back
Operation of the drain pump The sound of the pump is usually immediately audible and noticeable. If there is no sound, the pump is not working. We are looking for how to separately enable the water drainage program. As a rule, this is a separate option. After the program has been turned on, the pump should start working in 1-3 seconds. If everything is done correctly and the pump is operational, a buzzing sound will appear. If you hear no buzzing or other sounds when you turn on the program, the pump is probably faulty.
Is the washing machine drain pump working? Not really
<< Back
Clogged car hoses If you have identified a clog in the hoses, you need to disassemble them, clean them, and then reassemble everything.
Does the washing machine drain well? Not really
<< Back
Hurray, you did a great job, you fixed it.
<< Return to the beginning of diagnostics
The drain pump is faulty, call a professional.
<< Return to the beginning of the diagnosis.
The washing machine does not rotate the drum. During the operation of the washing machine, such a problem may occur. Each model has a different drum operation. It rotates according to a given algorithm, which is set by the program. This principle applies to spinning and washing. If you are not sure whether the drum is not spinning or whether it is working, put the laundry in the washing machine. Start the spin program. If the machine is running, it will first drain the water and then start spinning. In this case, a rotational process will be observed. If rotation is not visible, then check the belt. First, turn off the program, then unplug the wire from the outlet so that power does not flow into the device. Now you need to remove the back cover. You will need to carefully inspect the drum belt. It is quite easy to determine whether it is in the wrong position or damaged.
Is the washing machine belt torn or stretched? Not really
<< Back
Broken drum drive belt If the belt breaks, it will be immediately visible. There are also often cases when the belt simply stretches, which is why the drum, accordingly, does not rotate. Do not allow the machine to operate if the belt breaks. It is important to check whether it has wound around the engine pulley or broken the wiring to the engine. The heating element and temperature sensor may also be damaged if the belt does catch the wires. It is imperative to ensure that the belt model is original. If you choose an unsuitable or low-quality product, this will affect the performance of other devices. How do you know what kind of belt you have? There will be a marking written on the old one, compare it with the one indicated on the belt offered to you. You can also find out belt information by car model.
<< Return to the beginning of the diagnosis.
Washing machine motor malfunction If a malfunction is not found, the block with wires must be disconnected from the electric motor. Carefully remove it. We visually evaluate the engine. It may have melting, cracks, or other effects that clearly indicate damage. We call the windings of the tachogenerator and the engine. It is important to understand that you can fully study how correctly the engine operates and whether there is a malfunction only at the stand. If rotation does not occur, there may be a problem with more than just the motor. Sometimes the cause is a malfunctioning electronic module. If a short circuit occurs in the engine, the module could be damaged, while the engine remains operational. Also, the wires could be damaged.
<< Return to the beginning of the diagnosis.
Repairing a washing machine that does not spin clothes After completing the washing process, the washing machine may not spin properly or may not start spinning. Firstly, look, perhaps another mode is set, which does not involve turning on the spin cycle at all. This happens, for example, with programs related to washing woolen items and delicate fabrics. To check, run the spin cycle separately. If the washing machine does not drain water, we proceed to check the pump.
Does the washing machine now spin clothes? Not really
<< Back
Congratulations, you have solved your problem!
<< Return to the beginning of the diagnosis.
Repair of washing machines, imbalance Modern washing machines place the laundry on the drum before spinning. This is necessary for quality work. Check if this feature works. Sometimes a situation occurs when things get wrapped up in a ball that cannot be unwound automatically within a certain time. At this point the work stops. You need to unwind this laundry yourself, lay it out and continue operating the washing machine. In this case, it is important to turn off the machine, and then, when the laundry is laid out, turn on a separate spin program.
Does the washing machine now spin clothes? Not really
<< Back
Washing machine repair, drum drive repair Now you need to check the drum drive belt. We remove the cover and visually assess the condition of the belt. There should be no damage. If the tension is weak, the spin may not turn on. If you need to replace the belt, you should only replace it with the original one. After replacing, we try the program again.
Fault found, does the washing machine spin? Not really
<< Back
The engine or electronic module is faulty, call a repairman to your home.
<< Return to the beginning of the diagnosis.
The washing machine hums, makes noise during the spin cycle, rumbles, and makes a jet plane noise. If the washing machine makes noise during operation, making unusual sounds, it’s time to pay special attention to it. In this case, a visible breakdown or lack of functionality may not be observed, but the appearance of strange sounds indicates that it is time to look for a malfunction. It is important to understand that a new car that has just been delivered should be inspected for shipping bolts. If you forget to remove them, noise and vibration are inevitable. So, let's begin! We turn the washing machine drum and listen to extraneous sounds.
When rotating, do you hear extraneous noise, hum, balls rolling, does the drum move unevenly with slight jamming? Not really
<< Back
If the drum rotates and uncharacteristic sounds appear, including vibration, it’s time to check the bearings. If they malfunction, they will have to be replaced.
<< Return to the beginning of the diagnosis.
The counterweight of the washing machine has come loose. The fastening of the counterweights must also be of high quality. If they are “loose”, it’s time to eliminate this defect. In some cases, you can notice that the bolts that secure the stones are completely missing. In this case, the connectors for mounting will be visible. The bolts need to be found and put in place - they probably simply came loose. A rumble heard while the washing machine is operating may indicate that the bolts have partially loosened. To check the bolts, you can simply push the drum. If it is secure, the bolts are fine. If it moves, there is a defect.
Do you hear any noise, clanging or rattling noises when moving the washing machine tub? Not really
<< Back
The counterweight has come off
<< Return to the beginning of diagnostics
Checking the shock absorbers of the washing machine Checking the shock absorbers. If you hear vibration or excessive noise during the spin cycle, there may be a problem with the shock absorbers. Sometimes the washer moves. Now let's check the functionality. Remove the top cover. Click on the tank, move it five to seven centimeters down. A normal reaction will be observed if the tank rises sharply, jumping a little and stopping in its normal place. If this does not happen, the shock absorbers need to be replaced.
Are the shock absorbers of the washing machine working? Not really
<< Back
If a visible defect has not been identified, check whether a foreign object may have entered the machine. Replacing shock absorbers. The problem with shock absorbers wearing out occurs quite often over time.
<< Return to the beginning of the diagnosis.
Replacing washing machine shock absorbers. Malfunction and wear of shock absorbers is a fairly common phenomenon.
<< Return to the beginning of the diagnosis.
The washing machine does not turn on. It is worth trying to find the cause of the problem yourself and fix it. We start by connecting the device to the network. Next, click on the “network” button. In different car models, different indications are triggered: here either the display will start working, or, on the contrary, some other button.
Does the washing machine have an indicator? Not really
<< Back
Hatch lock lock (UBL) You can check it by turning on any of the programs. We choose what we will use. Click on the corresponding button. Don't forget to pay attention to the inclusion. As a rule, the process of activating a function is characterized by the presence of a certain sound, for example a click, with which the device makes it clear that pressing again is not necessary and the machine is already working. If there is no sound, the button may be broken. In this case, the main thing that must be done is to block the hatch and start working. If this happens, everything is fine.
The washing machine is blocking the hatch and the UBL is triggered? Not really
<< Back
Water fill valve malfunction
<< Return to the beginning of the diagnosis.
The washing machine hatch does not lock
<< Return to the beginning of the diagnosis.
No indication Checking the electrical circuit. If you notice that the washing machine does not respond to being turned on, it is first recommended to check the power supply. The outlet may be faulty. Try connecting another device. If the outlet works, you need to check whether the circuit that conducts energy through the washing machine from one element to another is intact. To do this, you will need a multimeter, which will help you fully analyze the ability to respond to an electrical signal at several stages of operation. If there is no network connection anywhere, this is probably the problem. We carry out this manipulation until we reach the electronic module. If we are talking about an old washing machine, here it will look like the device’s program. When you turn on the button, there should be no breaks in the circuit. If the circuit works, everything is fine electrically.
Is the washing machine's power supply OK? Not really
<< Back
Repair of electronic module (unit)
<< Return to the beginning of diagnostics
Contact circuit fault
<< Return to the beginning of diagnostics
How to disassemble the body of an Atlant washing machine
When disassembling the washing machine, it is recommended to take photographs of each step, especially when disconnecting the wiring. This will allow you to easily assemble the equipment in the future, without making mistakes that could lead to disastrous results and expensive repairs to the device.
In numerous cases, for example, when replacing a drain pump or heating element, to repair equipment it is necessary to only partially disassemble the Atlant washing machine.
To gain access to these components, you must:
- Unscrew the screws, slide the top cover back and remove it.
- After unscrewing the fasteners, remove and remove the back cover.
By completing these steps, the user will gain access and be able to replace the pressure switch, transformer, interference filter (FPS), and water inlet valve.
If you drain the water through a filter or emergency drain hose, the washing machine can be turned on its side. This gives access to the drain pump and pipe.
Behind the cover, located on the back of the device, there is a heating element, drive belt, tank and motor, as well as an electronic unit. Of these components, the easiest to remove for repair or replacement are the heating element and the electronic module.
To completely disassemble the washing machine, you should remove the detergent drawer from its seat and unscrew the screws that are located behind it. This will allow you to detach the control panel.
The hatch of the washing machine can be removed very easily; to do this, you just need to unscrew the fasteners that hold it. Next, you will need to unclench and remove the clamp that secures the cuff. Next, you need to unscrew the locking mechanism fasteners and remove the sensor; to do this, you need to place your hand in the drum. After this, you can detach and remove the front panel.
The disassembly of the washing machine body has been completed.
Removing the top cover of a front-loading machine
Before removing the cover of a front-loading washing machine, disconnect the equipment from the power supply and communications. Then you need to do the following:
- push the machine out of the niche;
- find the mounting screws on the body;
- Unscrew the bolts using a suitable screwdriver;
- save all plastic washers and gaskets;
- push the panel away from you to remove the fasteners from the grooves;
- lift and carefully remove the cover of the device.
Expert opinion
I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.
Ask a Question
Install the top panel in the reverse order: first get into the grooves, then push the cover into place and tighten the bolts, not forgetting the gaskets.
How to remove the top cover of a front-loading washing machine
First, prepare the machine for the procedure:
- Disconnect from the electrical network and communications.
- Move it away from the wall, out of a closet, out of a niche, out from under the sink—you'll need room to maneuver.
- Look where the mounting screws are located - most often at the back, but they can be at the front, like in older Siemens and Bosch models.
- Choose a suitable screwdriver or attachment for your favorite screwdriver and unscrew the bolts.
- Pay attention to the presence of plastic washers and gaskets - put everything in one place so as not to lose it.
How to remove the cover
- Push it in front of you so that the fasteners come out of the grooves.
- When the surface moves forward, lift it up and carefully remove it. This method is suitable for Indesit, Samsung, LG brands. You can find out how to open the top in 30 seconds by watching this video:
Exceptions
There will always be original modifications of the SM for which not everything is so simple. For example, in order not to damage the top of the Ariston, Bosch, Siemens, do not push it forward, lift it, pulling it towards you, at the desired angle. You will have to search for the position intuitively until the fastening hooks come out of the holes.
Top Loading Models
Removing the top panel from a top-loader is easier than from a front-loader. Before dismantling the part, turn off the power to the equipment and provide free access to the housing, then you must:
- open the lid;
- use a screwdriver to move the pins;
- wait for the door lock to turn off after 3-4 minutes and unscrew the screws;
- press the latch;
- disconnect the wires.
If automatic unlocking does not occur, you will have to remove the side panels to access the lock. It is also worth making sure that the pins do not fall inside the machine.
Vertical cover
How to open the top one?
It is from the top panel that the disassembly of all models of LG washing machines begins. Removing the cover provides access to the pressure switch (water level sensor), filling valve, and counterweight.
Algorithm of actions:
- Approach the washer from the rear panel.
- Using a Phillips screwdriver, remove (counterclockwise) the two screws in the upper right and upper left corners of the rear panel. They are the ones that hold the lid of the washer in place.
- Grasping the top panel with both hands, slightly lift the lid and, pushing away from you, remove it from the body of the washing machine.
If the panel does not give in, under no circumstances should you pick at it with a screwdriver or a sharp knife (they will scratch the glossy surface of the plastic).
The cover must be gently rocked from side to side, and then the dismantling attempt must be repeated. The video will show you how to remove the top cover:
Features of dismantling washing machines with vertical loading
To get to the fasteners that hold the lid in top-loading washing machines (it also serves as the hatch door), you must first dismantle the control panel housing.
To do this, carefully lift the plastic cover with a screwdriver and then remove it from the body. Then unscrew the screws located on the sides of the washer. The central fastener is not touched (it holds the water supply nozzle).
As a rule, plastic washers are placed under the screws. During disassembly, it is necessary to ensure that these washers do not fall out of the seat. Otherwise, it will not be possible to firmly fix the lid when reassembling the washing machine.
Nuances for some SMA models
In some washing machines, the designers provide another way to remove the cover: after unscrewing the screws, the back of the panel is lifted up. In order for the part to move forward, it is necessary to catch a certain angle.
In a number of older machines, the bolts are located on the sides of the cover in the front. This is even more convenient, since the housing does not need to be pulled out far from the wall. Remove the plugs and unscrew the exposed bolts. Then pull the panel upward and it will come off.
As in the first case, the desired angle can be found experimentally. Make several attempts at different angles until you achieve the result.
Do you wash by hand?
Oh yes! No
Home appliances are not insured against breakdowns. Sometimes it’s easier and cheaper to do the repairs yourself. It is not difficult to disassemble a washing machine, both front-loading and top-loading, on your own without the help of a technician.
Use the recommendations offered and, having prepared the equipment, without haste, figure out the features of fastening the top panel in order to remove it.
All of the above applies to almost any brand, for example, Samsung, (LG), Bosch, Electrolux, Zanussi, Ariston, Indesit, Wirlpool, Kandy, Hansa, Gorenje , "Ardo", "Beko", "AEG", Miele, Siemens, "Kaiser" and "Atlant". The design of modern washing machines is not very different from each other, and a number of parts are suitable for different models. For example, drain pumps and heating elements.
Video
How to remove the lid on modern washing machines
To remove the lid from the washing machine, you first need to move it away from the wall so that you can access the back wall of the washer. This is due to the fact that the cover mounting bolts are located at the back; we will need to unscrew them. If your washing machine is installed under the sink, then the matter becomes a little more complicated, because it will have to be pulled out from there.
On different models of washing machines, the number of screws may vary, 2-3, but most often there are two. To unscrew them, use a Phillips screwdriver and rotate them counterclockwise until they are completely unscrewed.
There may be plastic washers under the screws, so be careful that they do not fall out or get lost.
After the lid is unscrewed, it must be removed; to do this, you need to move the lid back relative to the washing machine , then lift it up and put it to the side.
The cover is installed in the reverse order, i.e. first you get it into the grooves, push it into place, and only after that tighten the bolts.
If you have removed the side cover from a regular personal computer, you probably already realized that it is attached there in a similar way.
