Narrow dishwasher from Electrolux
The company, founded in Sweden, offers about 20 different narrow built-in dishwashers for sale in Russia. All of them are assembled in Eastern Europe - they are produced in factories in Poland.
They have many common qualities, after analyzing which you can make a choice in favor of this brand or take a closer look at similar machines from other manufacturers.
Basic programs and functionality
Machines built into kitchen furniture are divided into fully and partially built-in. Electrolux narrow-format models have a height of 81.8 cm and a width of 44.6 cm.
Fully built-in Electrolux machines are produced with a depth of 55.0 cm, and partially - 57.0 cm. The height of the niche can reach 87.8 cm by increasing the length of the legs.
All narrow-format models of dishwashers produced by Electrolux are equipped with 5–7 programs that differ in operating time and temperature at which washing occurs.
Additionally, there are several developments that are typical for all devices in this line. AirDry function. The essence of this exclusive technology is to automatically open the door to ventilate the dishwasher chamber using dry room air.
At the same time, the small amount of moisture entering the kitchen does not create any problems for furniture or other items, and the dishes dry perfectly.
Leak protection function. All Electrolux devices are equipped with a water spillage prevention system, implemented by introducing an “AquaStop” type valve into the hoses or a more modern “AquaControl” version.
This allows you to eliminate situations with kitchen flooding in the event of a machine breakdown or damage to the integrity of hoses or connections.
Inside, all models are equipped as standard: two baskets, the top of which can be located at different heights, which makes it possible to place large items such as pots, pans and trays down.
There are also technological solutions that are not implemented in all models:
- My Favorite. A function that remembers all program settings, allowing you to restore them with one click.
- Time Manager. This function speeds up the washing process by approximately half by increasing the volume of water supplied and its temperature. Drying results may be worse than with normal operation.
- XtraDry. This option increases drying efficiency by allowing the program to run longer. It does not work with the Time Manager function at the same time - when you turn on one mode, the other is turned off.
Some models support internal tank lighting. This is convenient if the position of the machine does not allow sufficient light from the room to penetrate inside.
Light indication of completion of work. If the indicators are hidden behind the facade, then you can find out about the status of the process by the light beam falling on the floor.
Red color means washing or drying is in progress, and green color means the job is finished. This option is used by many manufacturers. More advanced models display the remaining operating time on the floor.
The washing and drying class of all narrow-format machines is “A”, which is confirmed not only by tests, but also by reviews of real consumers. Electrolux models do a good job of their main function.
Pros and cons of the brand
Narrow-format built-in machines from Electrolux are distinguished by a number of properties, some of which can be considered a plus:
- Balanced set of programs. As a rule, consumers use one mode for daily washing of dishes, as well as quick (up to 30 minutes) and intensive (at temperatures up to 70 degrees) washing. All Electrolux models have these programs.
- Intuitive interface of the control and display panel. Setting up these dishwashers can be figured out fairly quickly. All set parameters are displayed, so the process of programming the operating mode is not difficult for the average user.
- Competent and simple regulation of internal space. A fairly successful design of the baskets and the implementation of vertical movement of the upper one makes it possible to place large objects and dishes of complex geometry for washing.
Additional equipment includes a basket in which cutlery and special holders for glasses are placed.
Also, machines manufactured by Electrolux have their own disadvantages that you need to know about:
- Lack of child protection. An incomprehensible decision by the designers, who did not provide for the possibility of complete mechanical locking (like Bosch) or making it more difficult to open the door (like Ariston or Hotpoint) when the dishwasher is operating.
- There is no half load mode for the machine. Therefore, with a small volume of dishes, the machine will still go through the entire cycle with the usual consumption of water, loaded detergents and electricity.
- None of the models, even the most expensive ones, have automatic detection of water hardness. Therefore, you need to check this parameter yourself and set the required salt supply level.
- The length of the water supply and drainage hoses is only 1.5 meters. Therefore, you have to install the machine nearby near a water supply or purchase similar hoses of greater length.
Users also have complaints about the quality of the plastic housing of Electrolux models assembled in Poland.
But this has little to do with built-in machines, since if they are correctly installed in kitchen furniture, the impact on the side walls and lid of the device will be insignificant. The cost of these dishwashers varies from 20,000 rubles. — 40,000 rub.
Source: https://sovet-ingenera.com/tech/posudomoyki/vstraivaemye-posudomoechnye-mashiny-elektrolyuks-45-sm.html
Operating instructions for Electrolux dishwashers
Any household appliance or device always comes with an instruction manual, which must be studied before you start using the device. However, there are some key points that you should pay attention to before starting operation. They can be formulated as follows:
- The installation location of the dishwasher must be chosen before purchasing it, which is determined by the need to place it in a particular place in the space and the geometric dimensions of the household appliance;
- in the immediate vicinity of the installation site there must be an electrical outlet that has a grounding contact and is designed for a current of at least 16 Amperes;
- the drain hose must be long enough to reach the sewer pipes that drain used water;
The dishwasher can also be used to wash dishes made of thin glass and crystal.
- the machine must be located strictly in a horizontal plane, which is ensured by adjusting bolts and legs;
- Before placing dishes in the dishwasher, they must be cleared of food residues;
- filters installed in the washing solution circulation system must be factory-made and correspond to the model of the device;
- sprinklers used to spray water and detergent, and filters must be cleaned regularly;
- operating modes should correspond to the degree of contamination and type of dishes, which will reduce the consumption of detergents.
The Comfort Lift series is easy to use and maintain.
TOP 5 built-in Electrolux dishwashers 45 cm wide
ESL 94200 LO
A built-in compact device, the installation and management of which every user can understand. Several dishwashing modes will allow you to choose the optimal one: a half-hour program at 60 degrees will save time, a program for several hours will serve a large family.
In the event of a power outage and restart, the machine will continue to operate from the previous cycle.
General characteristics:
- type - narrow;
- definition - fully built-in;
- capacity - 9 sets of dishes;
- energy consumption - A-class;
- drying - A-class;
- washing - A-class;
- regulation - electronic;
- modes - 5;
- number of temperatures - 3;
- drying type - condensation;
- protection against leaks - complete;
- auxiliary items - shelf for glasses;
- dimensions - 45*55*82;
- weight - 30.2 kg.
Specifications:
- water consumption - 10 l;
- power consumption - 2100 W;
- noise - 51 dB.
Pros:
- quality of washing;
- protection against leaks;
- simple controls.
Minuses:
- there is no separate tray for forks and spoons;
- noisy.
ESL 94320 LA
A quiet and smart dishwasher that will signal when the job is complete at the right time. The rinsing mode and thorough drying will turn your dishes clean and shiny, just like in store windows.
Small dimensions will allow you to install the device even under the sink, while still leaving enough space in the kitchen.
General characteristics:
- type - narrow;
- definition: fully embeddable;
- capacity - 9 sets of dishes;
- energy consumption - A-class;
- drying - A-class;
- washing - A-class;
- regulation - electronic;
- modes - 5;
- number of temperatures - 4;
- drying type - condensation;
- protection against leaks - complete;
- auxiliary items - shelf for glasses;
- dimensions - 45*55*82;
- weight - 37.3 kg.
Specifications:
- water consumption - 10 l;
- power consumption - 1950 W;
- energy consumption at one time - 0.7 kWh;
- washing duration - 245 minutes;
- noise - 51 dB.
Pros:
- silent;
- washes away absolutely any fat;
- There is a 30-minute mode.
Minuses:
- no child protection.
ESL 94201 LO
A 45 cm wide dishwasher is an excellent solution for small kitchens. The controls are intuitive for everyone; the rotary knob helps you find the desired washing program. Express mode will make your dishes perfect in 30 minutes.
General characteristics:
- type - narrow;
- definition: fully embeddable;
- capacity - 9 sets of dishes;
- energy consumption - A-class;
- drying - A-class;
- washing - A-class;
- regulation - electronic;
- modes - 5;
- number of temperatures - 3;
- drying type - condensation;
- protection against leaks - complete;
- auxiliary items - shelf for glasses;
- dimensions - 45*55*82.
Specifications:
- water consumption - 9.5 l;
- energy consumption at one time - 0.878 kWh;
- noise - 49 dB.
Pros:
- there is an express car wash;
- quiet operation;
- There is a rinsing program.
Minuses:
- Plate holders do not fold;
- there is no delay in starting work;
- high salt consumption.
ESL 94300 LA
A device that combines safety, environmental friendliness and high technology. The machine has electronic control, the programs of which are very easy to configure. In order to wash a small number of plates and cutlery, you can use the accelerated wash.
General characteristics:
- type - narrow;
- definition: fully embeddable;
- capacity - 9 sets of dishes;
- energy consumption - A-class;
- drying - A-class;
- washing - A-class;
- regulation - electronic;
- modes - 5;
- number of temperatures - 4;
- drying type - condensation;
- protection against leaks - complete;
- auxiliary items - shelf for glasses;
- dimensions - 45*55*82;
- weight - 37.3 kg.
Specifications:
- water consumption - 9.5 l;
- power consumption - 2200 W;
- noise - 49 dB.
Pros:
- quiet;
- there is a rinsing function;
- Cleans mugs and plates well.
Minuses:
- Sometimes it doesn’t wash all the dirt off the pots.
ESL 94555 RO
A smart dishwasher that has all the necessary and useful functions: beam on the floor, delayed start, end-of-work signal, delay timer, 6 washing modes. If you like any of the programs, you can save it and launch it next time with just one button.
General characteristics:
- type - narrow;
- definition: fully embeddable;
- capacity - 9 sets of dishes;
- energy consumption - A-class;
- drying - A-class;
- washing - A-class;
- regulation - electronic;
- modes - 6;
- number of temperatures - 5;
- drying type - condensation;
- protection against leaks - complete;
- auxiliary items - shelf for glasses;
- dimensions - 45*57*82.
Specifications:
- water consumption - 9 l;
- power consumption - 2100 W;
- energy consumption at one time - 0.79 kWh;
- noise - 47 dB.
Pros:
- almost silent;
- washes away old deposits;
- There is an energy saving function.
Minuses:
- does not dry very well;
- no child protection.
Popular questions
Error i30 triggered in Electrolux dishwasher. The drain pump is constantly running. Unplugging does NOT help either. What could be the reason and how can I fix it myself? Alexander
The instructions for the Electrolux ESF 9452 LOX dishwasher do not say how long before the end of the wash the door should open? It opens for me 30 minutes before the end. Alla
Error I30 in the ELECTROLUX dishwasher and the pump is constantly humming. What is the reason? What could be wrong? How does I30 stand for? Victor
Why does the door in the ELECTROLUX ESL94510LO dishwasher not lock in the open position? Love
View all questions
The 'Message text' field must be filled in!
TOP 3 freestanding Electrolux dishwashers 45 cm wide
ESF 9423 LMW
Compact, silent and easy to operate dishwasher. After completion of work, the smart mechanism will give a signal and open the door. The quality of washing and drying is ideal - with Electrolux your dishes will be like new!
General characteristics:
- type - narrow;
- definition - free-standing;
- capacity - 9 sets of dishes;
- energy consumption - A-class;
- drying - A-class;
- washing - A-class;
- regulation - electronic;
- modes - 5;
- number of temperatures - 3;
- drying type - condensation;
- protection against leaks - complete;
- auxiliary items - shelf for glasses;
- dimensions - 45*62*85;
- weight - 37.2 kg.
Specifications:
- water consumption - 9.9 l;
- power consumption - 1950 W;
- energy consumption at one time - 0.78 kWh;
- washing duration - 225 minutes;
- noise - 49 dB.
Pros:
- perfectly washes away dirt;
- quiet.
Minuses:
- Do not place the dishes too tightly, otherwise the device will not wash off all the dirt.
ESF 9421 LOW
Polish dishwasher, which is distinguished by high quality and stylish design. With convenient options - delayed start, rinse and wait, washing dishes will become even more interesting and faster.
The AQUACONTROL system with a double-layer inlet hose and solenoid valve will prevent leakage.
General characteristics:
- type - narrow;
- definition - free-standing;
- capacity - 9 sets of dishes;
- energy consumption - A-class;
- drying - A-class;
- washing - A-class;
- regulation - electronic;
- modes - 5;
- number of temperatures - 3;
- drying type - condensation;
- protection against leaks - partial;
- auxiliary items - shelf for glasses;
- dimensions - 45*62*85.
Specifications:
- water consumption - 10 l;
- power consumption - 21000 W;
- energy consumption at one time - 0.87 kWh;
- washing duration - 110 minutes;
- noise - 49 dB.
Pros:
- nice design;
- there is a short sink;
- operates almost silently;
- high quality work.
Minuses:
- Do not wash wooden, cast iron, aluminum dishes;
- plastic components.
ESF 9420 LOW
With a width of only 45 cm, the device represents the optimal solution for small kitchens. The desired program is selected using the menu and the mode selector knob. An LED indicator indicates the need to add rinse aid or salt.
General characteristics:
- type - narrow;
- definition - free-standing;
- capacity - 9 sets of dishes;
- energy consumption - A-class;
- drying - A-class;
- washing - A-class;
- regulation - electronic;
- modes - 5;
- number of temperatures - 4;
- drying type - turbo;
- protection against leaks - partial;
- auxiliary items - shelf for glasses;
- dimensions - 45*62*85.
Specifications:
- water consumption - 9.5 l;
- power consumption - 2100 W;
- energy consumption at one time - 0.88 kWh;
- noise - 49 dB.
Pros:
- there is a instantaneous water heater;
- there is an express car wash;
- ease of operation.
Minuses:
- no child protection;
- does not always wash away food residues from fast modes.
Source: https://tekhnik.top/kak-vybrat-posudomoechnuju-45-sm/
Selecting an Electrolux dishwasher program
The Electrolux dishwasher manual will also help you understand the control buttons, of which there are six in most models. On the left is always the power key. Then there are four buttons in the center that allow you to select one of the programs. The rightmost key can delay the start from 3 to 9 hours. The panel is completed by a row of light indicators, indicating the stage of washing or the end of the supply of cleaning products in the containers.
Having dealt with the control buttons, you can proceed to selecting a program. Most Electrolux models have four options:
- Intensive. Occurs at 70 degrees and is the longest in time. Suitable for dishes with dried food marks.
- Standard. Performed at 65 degrees and applicable to dirty dishes, but without dried marks.
- Accelerated. Optimal for quickly washing plates and cups after meals, which leaves almost no greasy stains. The program is implemented at a temperature of 65 degrees.
- BIO. Starts the wash at 50 degrees, maximizing water and energy savings. Suitable for normal soiling.
Installation of an Electrolux dishwasher
Today, buying a dishwasher can make a big dent in the family budget, and if you add to this the payment of a technician for installation, costs increase. You can get out of this situation and save on installation costs by trying to connect the PMM yourself.
We offer a detailed installation diagram for the Electrolux dishwasher with photos and videos. Simple instructions will help you save money and protect you from common installation mistakes.
Preparing a place for the machine
Many home craftsmen often ignore this important installation stage, starting immediately to install the PMM, without preparing a place for the equipment. This results in problems that arise during the connection - they could have been avoided if the place had been prepared in advance.
Another misconception among users is that the place supposedly needs to be prepared only for the built-in model - even a regular stationary Electrolux dishwasher is difficult to connect without preparing the place.
First, think about how to install the equipment so that the proximity to all communications (electricity, water supply and drainage) is maximum. Please note that the distance to the water pipes should not exceed a 3-meter mark, otherwise an increased load will be placed on the PMM parts.
Also take care of the following points:
- You need to organize a flat and strong base for the equipment - modern PMMs weigh from 17 to 60 kg, depending on their type and dimensions.
- There must be a connection point to the cold water supply nearby.
On a note! If you decide to connect to a hot water pipe, first make sure that this option is provided by the manufacturer.
- Prepare for connection to sewer drains.
- And most importantly, prepare a reliable outlet for connecting to the network. It is not forbidden to connect the PMM directly to electricity, but it is safer to do this through a voltage stabilizer.
Important! Every year in Russia tens of thousands of pieces of equipment burn out due to voltage surges. Even if your power grid is stable, a preventive measure in the form of a stabilizer in the event of a surge will protect not only the PMM, but also other electrical appliances.
You should definitely think about a solid foundation for bulky equipment if the kitchen has weak floors - especially old ones, with creaky and wobbly floorboards. If the floor is quite ordinary (linoleum on a reliable base or tiles) with a minimum of unevenness, you can try installing a PMM.
Cold water intake outlet
Make sure that the tee tap fits securely under the sink between the outlet for the mixer and the water pipe, and that the hose of the machine easily reaches the connection point. We'll talk about the hose installation process later.
Check the distance from the siphon to the PMM location
The drain hose will be inserted into the side outlet of the siphon and it is important that it is long enough to connect correctly. If the hose is not long enough, it is better not to extend it, but to replace it with a longer one (original, from Electrolux).
If the siphon does not have an outlet or a washing machine is already connected to the outlet, you need to change the siphon to a model with an additional outlet or throw a hose over the sink, which is not recommended for reasons of aesthetics and hygiene.
Checking the outlet
The socket itself must be at least not “cheap China” and can withstand the rated load of the device (and have a large reserve). As we have already said, it is better to connect the machine not directly, but using a stabilizer.
And the last thing at the preparation stage - the built-in PMM should be the size of the niche. When buying a machine in an online store, you risk that it will not fit into the prepared place - there are often errors in the characteristics on websites. Therefore, choose one of the options:
- Pick up a car at an offline retail outlet - measure all the dimensions and protrusions and, taking this data into account, prepare a niche.
- First, buy the device, and then start making furniture.
What do you need to connect the dishwasher yourself?
To install an Electrolux dishwasher, you need a lot of tools and parts. If there are usually no problems with the tool (screwdriver, pliers, level and adjustable wrench), then consumables often have to be purchased:
- FUM tape;
- PVC electrical tape;
- sealant;
- siphon with a fitting (outlet) for connecting the drain hose;
- brass or bronze ¾ tee tap.
- a flow filter with a mesh that will trap small debris on its way into the machine systems;
- tee to the sewer pipe, if there is no pre-provided outlet.
If electrical communications are not ready, then the list of what you will have to spend money on expands. If you don't have a suitable outlet, be prepared to buy the following:
- copper three-core cable 2.5 of sufficient length;
- European standard socket with moisture protection;
- difavtomat 16A (for line protection);
- stabilizer (recommended).
If communications have to be redone, then you need to ditch the wall, which means find a hammer drill. Also stock up on tools with wire cutters and an indicator screwdriver.
Important! Zero experience in installing electrical wiring? Do not risk your life, health and property and better contact an electrician. And most importantly, do not plug the PMM into an old (especially Soviet) outlet and refrain from using an extension cord.
If already at this stage it seemed to you that everything was complicated - don’t panic! Despite such a long shopping list, DIY work will still cost less than what the master will ask for. Another thing is if you don’t have the tools or skills, then it’s better to call the service.
Installation procedure
When all the preparatory work has been completed and a location has been chosen, you can begin the main installation steps.
Connecting the waste fluid drain hose
Move the machine closer to the installation site and place the free end of the hose on the sewer outlet (do not forget to remove the plug). The reliability of the connection will be ensured by sealant (if necessary).
Water connection
Turn off the cold water, disconnect the tap to the mixer from the water pipe. Connect the tee tap to the flow filter.
Screw the faucet, simultaneously isolating the connections with a fuser. A pipe connects to the tee at one end, and a mixer outlet at the other. There remains one free exit, onto which the PMM intake hose is put on. The remaining end is connected to the machine.
Electrical connection
When the socket is ready, install the dishwasher in its permanent place (adjust the legs to the level) and plug the plug into the network.
At this point, the work on manually connecting the PMM from Electrolux is completed. If you purchased a built-in model, all that remains is to hang the facade on the door, but this is a matter of a couple of minutes, since the front part is hung using fasteners and no tools are needed.
How to avoid losing your warranty
Please read the instructions carefully before installing the machine yourself. Each manufacturer indicates acceptable standards when connecting equipment. Most dishwashers cannot be connected to hot water. This leads to damage to hoses and filters.
If the PMM breaks down due to connection to a hot water supply, then you can’t count on warranty repairs.
Another dangerous point is connecting to the electrical network. It is prohibited to connect powerful equipment to regular old outlets without a voltage stabilizer, or to connect it to the same outlet as an electric stove. It is not recommended to use tees and extensions.
Source: https://foto-designa.ru/kuhnya/posudomojki/posudomojka-electrolux-ustanovka-i-podklyuchenie-vstraivaemoj-modeli-9450-shirinoj-45-sm
Installation Features
First, decide on the size of the dishwasher. If you have a small family, then feel free to choose a compact option for 6-8 sets of dishes. When integrating the Electrolux PMM into a finished set, it is important to choose the right place:
- Compact model. It fits perfectly under the sink, you just have to install a special siphon. Proximity to communications is a big plus. The machine can also be placed on a countertop, because its dimensions are no larger than a microwave oven.
- Built-in narrow PMM. Fits in one of the kitchen cabinets. It is advisable to choose a place to the right or left of the sink. If you buy appliances and order a new kitchen, then a dishwasher cabinet is provided in advance.
- Freestanding model. Place it in a convenient place. You can move the cabinets apart and install equipment or put it in a free corner.
It is important to place the Electrolux brand dishwasher level. The tilt to one side should not exceed two degrees.
You can remodel the cabinet in the suite yourself. To do this, remove the door from its hinges, remove all shelves and the back panel. Or make holes for hoses in the side wall.
How to avoid losing your warranty
Please read the instructions carefully before installing the machine yourself. Each manufacturer indicates acceptable standards when connecting equipment. Most dishwashers cannot be connected to hot water. This leads to damage to hoses and filters.
If the PMM breaks down due to connection to a hot water supply, then you can’t count on warranty repairs.
Another dangerous point is connecting to the electrical network. It is prohibited to connect powerful equipment to regular old outlets without a voltage stabilizer, or to connect it to the same outlet as an electric stove.
It is not recommended to use tees and extensions.
Wiring
If your network is not prepared, call a specialist; you should not deal with electricity yourself. What work is ahead:
- Wall chipping. A puncher prepares a groove into which a three-core copper wire is laid.
- Installation of a European socket. Since the PMM cord is quite short, it is recommended to place the socket at a level of 45 cm from the floor. It must be moisture resistant and grounded.
- Connecting a 16A power breaker. It ensures stable operation of the equipment.
The electrical part is installed. Then take on the work yourself.
User manual
Initially, you should read the instructions for using the dishwasher. It is recommended to read it completely to avoid various “surprises”. Then you need to connect this unit to the power supply, water supply and drainage. It is better to seek help from a professional.
When the technician has made all the necessary connections, you can proceed to preparing the equipment for use, namely:
- Fill the salt container and rinse aid dispenser;
- turn on the Quick wash program to clean the inside of the equipment from various types of contaminants,
- adjust the water softener level, taking into account the water hardness in the region where you live; Initially the average value is 5L, although you can change it in the range of 1-10 L.
Don't be afraid to try all the operating modes and test the basic functions, as this will help you determine which programs and settings are right for you.
If desired, you can immediately enable or disable settings such as:
- sound signal about the end of work;
- rinse aid dispenser indicator;
- automatic selection of the program and settings that were used during the last dishwashing;
- sound indication of button presses;
- AirDry function;
- and also adjust the water hardness indicator.
You need to know how to properly load your dishwasher. The following recommendations from experts will help with this:
- The lower basket should be filled initially;
- if you need to place large items, the stand below can be removed;
- the upper basket is designed for cutlery, glasses, cups, glasses and plates; lower - pots, pans and other large utensils;
- The dishes should be placed upside down;
- It is necessary to leave a little free space between the elements of the dishes so that the stream of water can easily pass between them;
- if you simultaneously want to wash dishes that break quite easily with stronger elements, then choose a more gentle mode with a lower temperature;
- Small items, such as corks, lids, are best placed in a special compartment or compartment designed for forks and spoons.
To use an Electrolux dishwasher correctly, you need to remember the following important points:
- large food residues should be removed from dishes before loading them into the machine;
- immediately sort the dishes into heavy and light ones, while large-sized dishes should be located exclusively in the lower basket;
- After finishing the dishwasher, do not immediately remove the dishes;
- If the dishes are very greasy, it is recommended to use the soaking program; it will be easier for the equipment to cope with heavy contamination.
The instructions for using the Electrolux dishwasher note that the unit requires regular maintenance, then it will last longer.
Adhere to the following rules:
- After each dishwashing cycle, it is necessary to wipe the gasket located around the door;
- to wash the inside of the chamber, it is recommended to select the standard program once a month and run the unit without dishes;
- about 2 times a month you need to unscrew the drain filter and remove accumulated food debris;
- All nozzle holes should be cleaned with a needle approximately once a week.
Source: https://stroy-podskazka.ru/posudomojka/brendy/electrolux-45-sm/
Electrolux dishwasher care
The operating instructions for the Electrolux dishwasher require regular maintenance of the unit. After each use, you need to wipe the gasket around the door. Once a quarter you should run a standard program, but without dishes, which will clean the chamber from the inside. Once every two weeks, you need to unscrew the drain filter and clean it of food debris. The nozzle holes are cleaned with a needle every three months.
