How to set up a hair clipper: instructions, features, tips

Today, many men prefer to cut their own hair. This is not only very convenient, but also profitable, since it saves money significantly.

Unfortunately, not everyone knows how to set up a hair clipper correctly, but this will largely determine the quality of work and the service life of this device. We offer several recommendations for setting up the machines.

Why is it necessary to adjust the machine?

At first glance, it may seem that the machine is a completely ordinary and simple device that does not need to be configured, but can be used immediately. But this is far from true. It is very important to take care of your device so that it will last for many years.

Over time, the knives of some devices may begin to cause some inconvenience during use, leave hair uncut, bite it, and even receive an electric shock. In this case, it is necessary to service the device and adjust the blades. Let's look further at how to set up a hair clipper.

Blade adjustment

Adjusting the blades of this device is a very important procedure. It needs to be done when the machine starts to work poorly. She may begin to cut her hair sloppily or bite her hair.

In order to adjust the blades of the clipper, you must clean it from dust and dirt. There may be hair left on them, which also needs to be removed. How to set up a hair clipper? To do this you will need a regular screwdriver. Use it to unscrew the screws that secure the blades to the body of the machine.

It is worth noting that different manufacturers place these mounts in completely different places, but the design itself does not change. Once you have managed to do this once, you don’t have to worry, because then everything will be much easier.

Initially, you need to loosen the bolts on the body and unscrew two screws. The end of the blade should be moved to the edge of the top. This position must be fixed and set correctly. This is the procedure that will allow you to get an excellent hair and beard cut.

There is another easier way to set up a hair clipper without focusing on the angles. Everything happens in the same way, but in this case the middle of the upper blade will serve as the mark. This is how most budget machines are configured.

If the device has been used for a long time, then most likely it will be necessary to lubricate all the elements of this device so that they can last as long as possible. Usually the blades are adjusted once, and after that the machine works perfectly for a long time. It is important to know that after each use it should be thoroughly wiped to remove dirt and hair residues. And the most important thing is to ensure that the device does not come into contact with water, otherwise it may break down.

The adjustment scheme is the same for all devices. Let's look at how to set up hair clippers from the most popular brands.

How to disassemble and reassemble the machine

To disassemble the machine you will need screwdrivers (regular and Phillips), pliers, a tester and, preferably, a multimeter to “ring” the cables. If the integrity of the soldering is broken, you will need a soldering iron. When disassembling and repairing, be sure to clean the parts inside the case. Therefore, prepare a small brush and a soft, lint-free cloth.

Before disassembling, check the voltage with a tester to see if the wire is broken. If everything is fine with the cord, “ring” the switch and voltage switch with a multimeter. This will help you understand how the device works and detect burnt contacts. Then you can disassemble the machine:

The housing parts in most models are held in place by screws. They are carefully unscrewed with a screwdriver, holding the lid. If the thread turns at the fastening point, it will no longer hold the part.

The cover is removed, the rotor and eccentric are cleaned of dirt, dust, and old grease. Brushes and other tools should be small to prevent damage to work surfaces.

The position of the knife block is checked. It needs to be cleaned and, if the blades are not positioned correctly, align them with pliers and fix them.
When opening the case, pay attention to the integrity of the soldering at the point where the conductors connect. If there are problems, you can fix them with a soldering iron or take the machine to a workshop.
The integrity of the springs is checked (if they break, you can simply replace these parts yourself), the condition of the motor, wiring and other parts.
After work, the parts are assembled in the reverse order. You need to put the cover on the machine and tighten the screws tightly. The device is then checked for functionality.

Even if it was not possible to repair the device, it is important to carefully assemble all the parts. It is recommended to periodically disassemble a working machine to clean the internal parts and adjust the position of the blades.

Vitek hair clippers

Vitek is considered a very high quality hair clipper. With its help, you can quite easily cut your hair up to a length of twelve mm, as well as down to the smallest length - three mm. The main advantage is that the blades are made of steel, and, as you know, this is an excellent material. The machine has a low noise level and low vibration. Many people don't like it to be too noisy, so this is a great option for them. The body is made of high-quality materials, which allows you to protect the machine from impacts and other damage. In this case, the machine will serve for a long time.

Basic Rules

No matter how light and convenient the cutting device is, you need to hold it with the blades down in your dominant hand. Right-handed people take it in their right hand, left-handed people take it in their left. To prevent the device from slipping during operation, many people choose models with a rough body, like the Moser Genio Pro. Then the head of the nozzle is pressed against the skin and, moving smoothly along the surface of the head, the device is directed against hair growth.

Let's take a closer look at how to properly hold the clipper while cutting hair:

● hair shortening begins from the back of the head, moving the device towards the crown. Movements should be soft and smooth. In this case, the head of the nozzle should not hang in the air, but lightly rest against the scalpel. With the 1400 Edition from Moser it's easy;

Machine model Scarlett SC-1263

This brand is quite popular among users. This machine has excellent quality and an inexpensive price.

Its power is 13 W. The length of the wire is about two meters, and it works from the network. The most common model has four attachments included. This includes scissors, a comb, a knife cover, an oiler and a storage case. It runs on battery power and charges within seven hours. The blades are very high quality and durable. Also has seven steps in length. Scarlett is an excellent choice for the category of people who do not consider it necessary to spend money on hairdressing services, but prefer to do their own haircut at home.

Recommendations

Professionals advise:

Experience is gained through practice, but you don’t have to cut everything. First, work on yourself, then take on relatives and friends. There will be success, you just need to be patient. Don't be afraid of mistakes. More than one master could not do without them.
Watch more videos on the work of masters and training videos on haircuts. Understand how the device works and its capabilities. Remember, most machines are designed for right-handed people. To avoid problems, determine the orientation of your model.
Start with short haircuts - they are simpler and you can always “correct” with a cut to zero. Continue after regrowth. Don't give up.
At first, make do with a starter kit - a simple and reliable machine plus several attachments to create a smooth transition and an even border. Don’t rush to throw away money on expensive, professional equipment and a set of attachments if you don’t have at least initial experience.
Any equipment, especially if it comes into contact with hair and skin, requires maintenance. Remember to clean and disinfect your blades regularly.
Choose a couple of simple haircuts to do. As you master, gradually increase complexity.
Before you start, study your hair - structure, fragility, growth rate. If necessary, contact a specialist.

Today, stores offer a wide selection of equipment for cutting hair at home. With the help of a typewriter you can create a mood and change a boring image. Follow the rules, watch videos with lessons and you will succeed.

Subscribe to our Social networks

How to set up the Scarlet SC-1263 hair clipper?

Such models are usually adjusted without removing the blade. You can get away with simply tightening the bolts. You may also need to lubricate worn-out elements of the device. Motor oil (working off) is best suited for this procedure.

The main thing to remember is that clippers of this particular model require constant adjustment, but the entire setup scheme is somewhat simpler than that of clippers of other models. Therefore, taking proper care of the equipment will not seem like such a big problem.

Proper machine care

To ensure long-term operation of the machine, you should follow some important rules:

Before setting up, be sure to look at the instructions and study in detail all the information written in it. If you don’t do this, you can start doing everything wrong and worsen the condition of the device.
After each haircut, the clipper should be cleaned thoroughly. As a rule, this is necessary for hygiene purposes and to ensure that the hair that remains after the procedure does not clog the motor and it does not overheat. If you do not take this seriously, the machine will simply burn out, and in this case you should not count on a guarantee. Based on this, you should clean the blades as best as possible using a special brush.
Be sure to lubricate the blades, and do this often. A large percentage of people do not follow this rule because they consider it a waste of time, and then complain that the machine does not do its job well. The best option is to lubricate after each haircut. Immediately after this, you need to turn on the machine so that the oil evenly lubricates all the elements.
Under no circumstances should you lubricate with substances other than the special lubricant included in the kit. If the lubricant runs out, you can use engine oil.
Sharpening the blades is also a necessary condition. This can be done once every three months.
The machine should not be left in a room where the temperature is around zero degrees. It must be kept at room temperature.
If the machine is charged using a battery, then you first need to completely discharge it, and then charge it for about eight hours.
Even if no one uses the machine for a long time, the battery still requires charging once every six months.
Never adjust the blades by force. If you cannot get the blades into the desired position the first time, then you can assume that there is some kind of problem. Therefore, you must initially follow the recommendations and read the instructions for use again. Many models come with a special key for this procedure. If this option is not available, you can use a screwdriver.
A situation may occur that the adjustment does not help at all, and the device continues to malfunction. In this case, you can purchase new knives. They cost an order of magnitude cheaper than a new machine. It is worth noting that many come with special blades and attachments.

Machine haircut techniques

Before you start cutting, you need to set the lighting so that there are no shortcomings. It is always important to move smoothly in the direction opposite to hair growth: on the back of the head and on the sides - from bottom to top, and on the top - from the forehead. Moreover, the excess length is first cut off, and then the hairstyle is shaped. The blade should be gently pressed against the head, standing perpendicular, but continue to slide.

Haircut at one length using a universal nozzle

The simplest one, so with its help you can practically understand how to use a hair clipper. There is no need to change nozzles. It is enough to set the length and cut off all the hair. It is better to work in stages - for convenience, hairdressers divide the entire head into zones.

Start cutting from the occipital area, then level the temporal, and finally the parietal.

Naked, bald, down to zero

The haircut is suitable for men with masculine facial features - a pronounced chin, cheekbones. It is also done by those who have bald spots.

Stages:

Cut long hair with scissors so that the clipper does not get tangled in it.
Trim the back of the head, crown, and temples.
Carefully adjust the haircut with a razor.

For a bald haircut, we recommend using the FOILFX01 4Artists shaver from BaByliss PRO - its ultra-thin single floating block shaves clean. The model is equipped with a powerful and efficient electric motor (8500 blade movements/min.). Available in a metal case.

Hedgehog

A practical and effective hairstyle, especially on thick, coarse hair. The hedgehog can be short or elongated (hides unevenness of the skull, corrects the shape of the head). It is distinguished by the presence of smooth, almost imperceptible transitions.

Stages:

Remove the length of hair in the parietal area, if necessary (maximum 4 cm).
Wash your hair and dry it with a hairdryer so that it stands perpendicular to your head.
Using a comb and a machine, set the shape, choosing the optimal length of hair on the top of the head (usually up to 2 cm), since the hair on the entire head will be equal to it. Trim the temples and the back of the head to a length of 0.5 cm (but they can also be shaved).
Trim the back of the head, gradually increasing the angle between the nozzle and the head and, accordingly, the length of the hair. This will make the transition smoother.
Design the temporal zones.

To achieve a natural oval hair shape that follows the shape of the head, the ends of the strands in the parietal zone are milled.

Boxing, semi-boxing

A sporty haircut that suits men with an ideal skull shape.

Stages of a boxing haircut:

Cut hair from the entire surface of the head with a clipper with a 3 mm nozzle.
Using an edging machine, make an edging line opposite the temporal protrusion (for symmetry), and then cut off everything below it.

We recommend the professional edging machine ER-GP21 from Panasonic. It has a cut length of 0.31 mm, just right for a perfectly straight hairstyle. Supplied with 2 nozzles – 3 mm, 6 mm. Rechargeable model, operating time – 40 minutes.

Stages of a half-box haircut:

Remove hair at the temples and back of the head up to 1 mm.
Cut the strands on the parietal area with scissors to 4 mm.
Make a transition using a special attachment or a fading machine (they have flat knives).
Process the strands with thinning scissors to smooth out any unevenness.

For perfect transitions, use the US Fade Vibrator from Andis. With its help, you can adjust the cutting height (from 0.2 to 0.5 mm), modifying the haircut. Supplied with 5 nozzles from 1.5 to 6 mm. Cuts dry and damp hair.