Instructions for connecting the refrigerator to the network for the first time. How to turn on the refrigerator for the first time

Rating of the best refrigerators

Where to put the refrigerator so that it does not interfere

In order to buy a device of suitable size, you need to determine in advance the place where it will be installed. It is best if it is a corner in the kitchen or hallway. When the apartment is small, narrow models are recommended. Built-in appliances help save space.

When the layout allows, the refrigerator is placed near the kitchen door . It fits well into the corner between the walls and does not interfere with the residents. If there is not enough space, then the wall of the refrigerator will block the passage.

It is important to decide in advance which way the refrigerator door will open. They produce models with doors that can be hung.

When expanding the room, you should not completely demolish the walls. It is worth leaving a part to place the refrigerator . In the living room, which is combined with the kitchen, it is part of the interior. It can be placed in a visible place.

A good option would be to place the refrigerator in a niche made from a pantry. It can be done in the wall between the kitchen and the room. The niche is made of plasterboard. Small models are placed under a wide window sill, table top or shelf. This saves space and the equipment will not be conspicuous. If there is absolutely no space in the apartment itself, the refrigerator can be placed on a warm balcony.

Thus, knowing how to place the refrigerator in the right place can avoid many problems.

The refrigerator cannot be placed close to the tiles

How to install a refrigerator correctly: basic requirements

It doesn’t matter what model of refrigerator you have, whether it’s foreign or domestic, whether it works according to the no frost system or not, the requirements are the same for everyone.

When purchasing any equipment, a document with technical characteristics and operating requirements is issued along with the receipt. And before installing refrigeration equipment, carefully read them:

1. The refrigerator is placed away from heat sources. The equipment must not be connected near heating appliances and stoves, as this will disturb the temperature background. It is also protected from sunlight.
2. Choose a well-ventilated place where the air does not stagnate.
3. Pay attention to the room temperature. It depends on the refrigerant in the household appliance. For example, freon R134 thickens at 0°C, which means that such equipment can only be installed in a warm room. You cannot connect it on the balcony, as it will quickly break.
4. The humidity in the room should be no more than 80%. Products of plant origin are easily stored at 95%, and the humidity for products of animal origin is only 50%, no more.
5. It is also necessary to pay attention to the power supply. It must be grounded.
6. Be sure to leave gaps between the refrigeration equipment and the wall of at least 7-10 cm.
7. The refrigerator should not be placed next to the washing machine or even the coffee maker. It overheats if installed very close to other household appliances.
8. The device has a stabilizer that protects against damage as a result of a power surge. When connecting to the electrical network, we do not use extension cords or tees; we only connect directly to the outlet.
9. We adjust the legs, if any, taking into account uneven floors, immediately after installation in a permanent place. If the equipment is not level, this will lead to compressor failure.

Where to put the refrigerator so that it does not interfere

It is best to find the installation location in advance in order to purchase a device that is suitable in size.

Important! Usually the refrigerator is installed where there is a good outlet. But if you purchased a device with an ice maker, the connection is made to the water supply. It is placed in a niche of the built-in closet, next to the hanger.

It is best to place a refrigerator in a corner. But if there is not enough space in the kitchen, the device is installed in the hallway or utility room.

It is best to buy narrow models as they take up less space. Also, to save space, choose a built-in unit.

If the layout allows, the refrigerator is installed near the door in the kitchen. It will fit perfectly into the corner between the walls and will not interfere with the owners. If you’re not so lucky with the layout, the wall of a household appliance near the entrance will block the road, which is completely inconvenient.

If the kitchen is so small that there are no doors or walls at the entrance, the equipment is left where the kitchen unit begins, without blocking the passage.

Attention! It is necessary to determine in advance which direction the unit door will open so that it does not block the entrance. There are models with doors that can be hung.

If you are planning to expand the room, do not completely demolish the walls, leave part to place refrigeration equipment there. But in the living room combined with the kitchen, the device looks like part of the interior. Therefore, it can be placed in a prominent place, rather than looking for a secluded corner.

A refrigerator in a niche made from an old pantry is also a good option. It can also be made in the wall between the room and the kitchen. The niche for the refrigerator is made of plasterboard.

Very small models fit under a tabletop or wide window sill. The space in the room will not be reduced, and the device will not be conspicuous at all.

If there is absolutely no space in the apartment, the device is placed on an insulated balcony.

General installation sequence

A refrigerator is an expensive piece of equipment that is complex in design. Its performance is influenced by many factors. In order to prevent sudden breakdowns and maximize operation, you need to know how to install a refrigerator.

There are a number of general rules:

• to place equipment under the windowsill , as there may be high humidity there.
• The refrigerator should not be very close to radiators , ovens, heating systems, gas stoves and other heat sources. This is explained by the fact that it will operate at increased power to maintain cold inside the chambers. This will accelerate wear on the compressor and lead to other problems.
• Prepare a pre- grounded outlet and voltage stabilizer . The device will be connected to the network through them. You should not use adapters, tees and extension cords, as the refrigerator is considered a powerful device and this will create a fire hazard.
• Do not place the device close to sinks , as splashes may get on the electrical parts of the refrigerator. And in general this creates a danger due to high humidity.

Floor - durable

Before installing refrigeration equipment, carefully examine the floor covering . It must be motionless and durable. It is forbidden to place a large two-chamber refrigerator on a floor that is freely springy (3-centimeter boards with a large gap) and soft (4-5 layers of linoleum). The resulting vibration causes the engine to hum and make noise. As a result, it will quickly fail.

If the floor is springy and consists of boards, then plywood with a thickness of at least 4-5 mm can be laid on top.

It is advisable to install the refrigerator on concrete . It can support even a large apparatus of maximum height. The finish can be any, but for large equipment, a tiled base is ideal.

Warmth - away

To install a refrigerator, consider places far from heat sources . If you don't adhere to this rule, it will quickly break. The compressor runs continuously as the appliance heats up. As a result, the air inside the chamber must be regularly cooled. When used for a long time under these conditions, first the thermostat breaks down, and then the engine.

When considering how to properly install a refrigerator, take into account the location of the windows . The device is not placed next to them, since they heat up in the summer. An exception is situations when the room has air conditioning.

The refrigerator should not be located next to an electric or gas stove , it is also undesirable, because these appliances are constantly used, and they generate a lot of heat.

The minimum distance from the stove is 50 cm, the radiator is 30 cm.

Sockets - closer

Before installing refrigerators in the kitchen, pay attention to the accessibility of the outlet . It is advisable that it be next to the device. It is necessary to lay a direct wire from the electrical panel at the construction stage. Sockets should preferably be grounded.

Even when there is no outlet near the refrigerator, it is prohibited to use several extension cords at once. Their energy accumulates on the first tee, which is included in the plug. As a result, the network is overloaded and there is a risk of fire .

How to install a refrigerator correctly: 5 important points

Most of the installation requirements for the refrigerator are described in the operating instructions, which you will find in the accompanying documentation package. Study it carefully, paying special attention to the compliance of the operating class with the actual conditions, ambient temperature and air humidity in the room.

To ensure that your home cold storage device lasts a long time and does not cause vagaries to annoy you during operation, you should consider a few simple rules when installing such equipment:

• unpack and clean the refrigerator
• choose the right location for the device
• level the refrigerator/freezer cabinet
• connect the ice maker to the water supply if necessary
• connect the device to the network

Unpacking and Preparing for Installation

Unpacking the box and removing the foam blocks protecting the case, base stand, film and stickers will not cause much difficulty. After this, do not forget to unscrew the shipping bolts that secure the compressor springs. People often forget to do this, and then try to find the source of the increased noise. Open the doors, check the integrity of the plastic trays, drawers and glass, and then remove all components and accompanying documents. To prepare the installation of the device for permanent residence, it should be thoroughly washed both inside and outside. Plastic, factory grease and other materials in new equipment may have a specific odor. Therefore, to remove it, use a soft sponge and a non-aggressive soap solution with a little vinegar added. You also need to wash the floors in the intended installation location.

Do not forget that after delivery the device must stand for 6 - 12 hours so that the freon and compressor oil, “disturbed” by the tilt and shaking of transportation, flow into place, and the microparticles of the resulting condensate completely evaporate. All this time, it is strictly forbidden to connect the device to the network, especially in winter, when a large temperature difference between the street and the house increases moisture condensation.

Classic refrigerators Full No Frost LG GA-B509CQWL from 38,500 rub. LG GA-B379SQUL from RUR 31,350 Bosch KGN39AI32R from RUB 55,900 Bosch KGN39VW25R from RUR 36,810 Gorenje NRK 6191 EW4 from RUR 25,720 POZIS RK FNF-172 from 24,470 rub. Indesit ITR 5200 W from RUR 28,632 Gorenje NRK 6191 ES4 from RUR 26,740 LG GA-B419SQGL from RUR 29,990 LG GA-B419SQJL from RUR 27,680 Stinol STN 167 from 19,000 rub. Gorenje NRK 6192 AC4 from RUR 33,627 LG GA-B379SLUL from RUR 37,590 Samsung RB30A32N0SA from RUR 32,987 LG GA-B419SYJL from RUR 28,500 Gorenje NRK 6202 AXL4 from RUR 37,580 Gorenje NRK 6201 PW4 from RUR 18,000 Bosch KGN39AW32R from RUR 54,000 Beko RCNK 270K20 W from RUR 23,800 Bosch KGN39VI25R from RUR 43,900

Choosing the right installation location

It would be strange if you didn’t “figure out” in advance where you could put the new thing. Although, these design plans can be seriously interfered with by the recommended requirements and basic common sense. Let's immediately exclude places where it is undesirable to place a refrigerator:

• Near the window.
  Proximity to a window opening threatens increased humidity and direct sunlight on the surface, causing overheating of the device and fading of the housing coating.
• For heating radiators, heaters, stoves and ovens.
  Due to the proximity of heat sources, the compressor starts up more often, wears out faster and eventually fails. If it is impossible to avoid proximity to the heated surface of other devices, then it is necessary to ensure a minimum distance of at least 0.5 meters. Using a barrier made of thermal insulating material or covering the refrigerator with foil that reflects thermal radiation will also help to slightly reduce the temperature. But these tricks, one way or another, will affect the overall aesthetics of the kitchen interior.
• Near the sink or sink.
  As with any electrical appliance, placing the refrigerator adjacent to a water source can result in splashes on the body and socket, which can cause a short circuit.
• On the balcony.
  In the warm season, the humidity on an unglazed balcony is too high (more than 80%), and the covered area gets very hot in the sun, preventing normal operation. In the off-season, starting the compressor at temperatures above +5 °C will be difficult due to oil thickening in the cold.

From the point of view of convenient access, the refrigerator, regardless of the kitchen layout, should, together with the stove and sink, form a triangular workspace. In such a zone, these “three pillars” do not necessarily have to be nearby - it is enough to be within walking distance.

Thus, the best place for the refrigerator will not be the sunny side of the kitchen, where there will be an auxiliary table or cabinet between the appliance and the sink/stove.

For trouble-free operation of the refrigeration unit, good ventilation is also needed, which is ensured by the minimum allowable clearances:

• top about 100 mm
• to the wall (back and side) about 50 mm (preferably 70 - 100 mm)

Insufficient clearance for air circulation negatively affects heat removal from the condenser and compressor, which can lead to damage to the device. Under normal conditions, the temperature of these very heating elements is 10 - 15 °C higher than the room temperature, so it is very important that they are well ventilated. The refrigerant condenser is most often located on the back wall of the device and is a serpentine tube with wire fins. In many models of refrigerators with the Full No Frost system, the condenser is hidden behind the side walls of the appliance.

Another important point to consider is the proximity of a household outlet. The refrigerator's power cord has a limited length, and safe operation of the appliance does not allow it to be turned on through an extension cord.

Classic refrigerators without No Frost (drip)

Atlant XM-4208-000 from 14,770 rub. Atlant XM-6025-031 from 24,000 rub. Atlant XM-6023-031 from 22,000 rub. Atlant XM-6024-031 from 22,000 rub. Atlant MXM-2835-90 from 15,800 rub. Gorenje RK 4181 PS4 from RUR 18,950 Gorenje RK 4181 PW4 from RUR 18,000 Atlant XM-6021-031 from 21,500 rub. Stinol STS 185 from 18,000 rub. Atlant XM-6026-031 from RUR 25,500 Biryusa 118 from 14,200 rub. Bosch KGV39XW22R from RUR 26,710 Atlant X 1602-100 from RUR 22,780 Biryusa 120 from 15,330 rub. Biryusa 108 from 10,540 rub. Bosch KGV39XL22 from 28,000 rub. Atlant XM-4709-100 from 22,736 rub. Atlant XM-4625-101 from RUR 26,262 Atlant XM-4021-000 from 19,300 rub. Atlant X 1602-140 from RUR 25,538

Installing the refrigerator by level

At the next stage, the actual installation of the device is carried out at the selected location using a conventional construction bubble level. Using this simple tool, you should level the refrigerator horizontally and vertically, adjusting the height of the legs along the threads. Ideally, the floor under the device should be strong and level, and to prevent the device from moving during operation due to vibration, you can additionally use anti-slip stickers under the legs.

Advice.

In order for refrigerator doors without closers to close independently under their own weight, it is recommended to tilt the appliance backwards by 2 - 3 ° by adjusting the front legs.

Side-by-side refrigerators

Liebherr SBSesf 7212 from 68,890 rub. LG GC-B247JLDV from RUR 73,500 Liebherr SBS 7212 from RUR 104,000 LG GC-B247SMDC from 88,300 rub. Biryusa SBS587 I from RUR 42,141 LG GC-B247JEDV from RUR 72,400 LG GC-B247SEDC from RUR 83,490 Gorenje NRS 9181 MX from RUR 55,581 Hisense RS-560N4AD1 from RUR 40,750 MAUNFELD MFF177NFW from RUR 49,985 LG GC-B247SVDC from 79,000 rub. LG GC-Q247CBDC from RUR 115,490 Samsung RS54N3003EF from RUR 73,990 Samsung RS54N3003WW from RUR 65,750 Samsung RS62R5031B4 from 78,880 rub. LG GC-Q247CADC from RUR 118,000 Biryusa SBS587 BG from RUR 41,020 Samsung RS63R5571F8 from RUR 84,499 Bosch KAG93AI30R from RUR 128,000 LG GC-L247CBDC from RUR 114,000

Connecting a unit with an ice maker

Currently, expensive multi-compartment Side-by-side and French-door refrigerators are additionally equipped with such useful devices as an ice maker and a water dispenser. There are bulk structures that use their own reservoirs to prepare ice and cold water, and there are also stationary flow devices, the peculiarity of their functioning is that they need to be connected to a water supply. This is a simple job, similar to connecting a washing machine, which you can do yourself or with the help of a specialist.

Refrigerators with water dispenser

Bosch KAG93AI30R from RUR 128,000 LG GC-L247CBDC from RUR 114,000 Samsung RS64R5331B4 from RUR 115,990 Hitachi R-W662FU9X from RUR 71,990 HIBERG RF-47DD NFS from RUR 44,990 LG GR-X24FTKSB from RUR 202,995 LG GR-X24FMKBL from RUR 167,999 HIBERG RFS-484DX NFYm from RUR 62,911 Bosch KAI93VL30R from RUR 123,900 Ginzzu NFK-521 from 65,990 rub. Samsung RT62K7110SL from RUR 81,327 Novex NSSN117893W from RUR 46,999 Winia FRN-X22H5CWW from 69,710 rub. Winia FGK-51EFGW from RUR 41,549 HIBERG RF-23DS from RUR 24,823 HIBERG RFS-484DX NFY from RUR 59,935 HIBERG RF-47DD NFS+FR-34D NFS from RUR 101,509 Ascoli ADRFI375WD from RUR 44,249 HIBERG RFS-484DX NFXd from RUR 65,081 io mabe ORGS 2D FFFSS from RUR 185,000

Connecting the device to the network

To connect the refrigerator, it is recommended to use a two-pole socket with grounding. In newly built houses this is not a problem, but owners of apartments in old houses will have to come to terms with the lack of a grounding loop. This type of equipment does not like electrical networks with unstable parameters and is sensitive to power surges. Therefore, some modern models are equipped with built-in stabilizers, and if your device does not have one, then you need to purchase a voltage stabilizer for the refrigerator to preserve the “health” of the compressor.

Features of installing built-in refrigerators

Built-in refrigerators, which are no different in functionality from conventional free-standing models, have a different design and installation features. Since built-in appliances are placed in a furniture cabinet, they do not have an outer casing as such. Such models are especially demanding for good ventilation, because the small space of a closed niche can lead to an increase in the ambient temperature. Here it is also necessary to provide gaps between the furniture walls and the outer surface of the refrigerator to allow air flow to the unit from all sides. Typically, to improve airflow, a furniture cabinet is made without a back wall, and the tray is made with ventilation holes.

Air intake grilles at the base of the furniture cabinet and in the upper space above the refrigerator also serve the same purpose.

And the main difficulty that the installer will face is accurately attaching the facade panels to the refrigerator doors.

The fronts are made in the same design as all kitchen furniture and, after installation on the refrigerator doors, it looks like an ordinary cabinet.

Based on the method of fastening, there are two types of facade panels - rigid and sliding. When hard

When attaching a decorative panel to a door, they form a single whole, and the advantage of this type of installation is the ability to open the door at an angle of 110 - 115˚. There is absolutely no gap between the facade and the door, which makes this structure monolithic and solid. And as a disadvantage of this type of fastening, it is worth noting the increased load on the door hinges.

Sliding

The type of panel installation involves fastening the panel to a furniture cabinet using telescopic guides, which ensure simultaneous sliding movement of the front panel and door when opening. In this case, the load on the hinges is much less, but the reliability of the fastening very much depends on the quality of the guides.

Perhaps the installation of facades is the most labor-intensive part of installing built-in models, and therefore it is better not to do it yourself, but to use the services of professionals.

Built-in two-chamber refrigerators

Samsung BRB266000WW from RUR 57,700 Samsung BRB306054WW from RUR 84,990 Beko BCHA 2752 S from 31,000 rub. Gorenje RKI 4182 E1 from RUR 34,290 Whirlpool SP 40801 from RUR 77,000 Whirlpool SP 40802 from RUR 87,000 Liebherr ICNf 5103 from 63,000 rub. Atlant XM 4307 000 from 24 000 rub. Samsung BRB307154WW from RUR 79,500 Liebherr ICNSf 5103 from 70,000 rub. Midea MRI 9217 FN from RUR 39,490 Beko BCNA 275 E2S from 52,000 rub. LG GR-N266LLD from RUR 59,713 Liebherr SBS 33I3 from 118,000 rub. Hansa BK 316.3 FA from RUR 34,790 Whirlpool ART 9810 A+ from RUR 52,469 Smeg C 8194TNE from RUR 91,198 Hotpoint-Ariston BCB 70301 AA from RUR 34,690 Indesit BIN 18 A1 DIF from RUR 32,500 Bosch KIN 86VS20 from 66,000 rub.

In conclusion….

As you can see, there is nothing complicated about installing and connecting a regular refrigerator. The above rules and recommendations are quite simple to follow, but following them will have a positive effect on the efficiency of the machine, the prevention of operational failures and its long service life. Monitor for a few days after first turning on how the refrigerator works and how well it copes with its functions. Pay attention to the sound background that accompanies the operation of the unit, and if there is strong noise, look for its cause. If you have never heard an appliance equipped with a No Frost system in operation, then at first the gurgling sounds that the refrigerator makes will be new. These are completely natural background sounds that you will get used to over time. Don't worry if the back or side walls feel too warm to the touch. The permissible heating temperature of these surfaces up to 45 °C is the norm - this is how the condenser heat sink works. But, if the temperature is noticeably higher, then it’s time to sound the alarm and call a service technician.

Installing a refrigerator next to an oven

Refrigeration equipment and the oven are not placed close to each other for a number of reasons:

• Simultaneously functioning appliances heat the kitchen space to high temperatures . The kitchen becomes uncomfortable and the wall covering may deteriorate, especially in winter.
• from the refrigerator also affects the oven . With strong heating and power surges, a spark may occur, and as a result, a fire.
• The refrigerator produces heat . It heats up the back wall. The oven adds heat. Due to their close proximity, refrigeration equipment quickly becomes unusable and fails.

Water supply to the refrigerator

How to install a refrigerator correctly

Before starting installation, please refer to the manual first. All instructions , recommendations and tips about its operation can be found there. Correct installation is a guarantee of its long-term operation without failures.

Some manufacturers may have special installation requirements. This especially applies to special equipment. However, there are general requirements that should always be followed:

• Refrigeration equipment should not be placed near or under windows. This is due to the formation of condensation on the walls of working parts, which can lead to a short circuit and rapid failure of refrigeration equipment. In this place the sun's rays will fall on it. They adversely affect the operation of important parts and lead to their damage, thereby preventing the equipment from operating at efficient power. This applies to places with direct sunlight.
• The rules do not provide for the installation of refrigeration near heating devices. These include stoves, heating radiators or appliances and other devices capable of emitting heat. The reason for these requirements is similar to the reason for the sun's rays. The cooling media in the freezer compartments will heat up or even overheat, which will generally have a detrimental effect on the operation of the refrigeration product itself and can lead to its rapid failure. The distance from heating devices should be more than half a meter. If it is not possible to maintain such a distance, for example, due to the small size of the kitchen or other room, then the side exposed to heat waves should be covered with foil material or a partition should be added to reflect them. This will reduce their negative impact.

Insulating the refrigerator from heating media

• The surface for installation must be flat. This will relieve the owner from unpleasant noises during its operation and ensure its uninterrupted operation. Uneven installation also contributes to the spontaneous opening of its doors and maintaining the set temperature.
• The distance to the wall should not be too close. The distance should be at least 10 cm. This will ensure good ventilation and stable operation.

Installation diagram of equipment for providing ventilation of the rear wall with devices

• It should be connected to an outlet that must be grounded. For networks with fluctuations, you should stock up on stabilizing agents in advance.

Connecting refrigerators with an ice maker

A filter flask is attached to the back wall of the refrigerator to purify water . It is equipped with a replaceable cartridge, which is changed every 6-12 months. Sometimes an additional filter is installed in the general water supply system.

The faucet is connected to a water pipe that supplies cold water. Using adapters, a plastic or copper hose is connected to it. It leads to the technology's built-in filter. The installation and connection of refrigerators with an ice maker should be entrusted to specialists. It is difficult to carry out such work without experience. And the slightest mistake can destroy their technique.

How to connect a refrigerator to water

First, install the refrigerator in the prepared place . Then you need to crash into the water main. The materials for this are selected depending on the type. The tube is laid from a cold water supply to the point of connection to the device. Once a year, replace the water purification filter cartridge in the flask. Each manufacturer writes in detail in the instructions how to connect a home refrigerator to water.

Level installation of the refrigerator

After transporting the refrigerator, it is important to choose the right place for it with a flat surface. Many owners use tiles as a flooring material during renovations. Despite all the advantages, tiles can cause the refrigerator to slide on the surface. To avoid this, you should use special pads for the legs, which can be purchased at a hardware store or ordered online.

Level installation of the refrigerator

The installation instructions for the refrigerator say that the unit must stand on a flat surface. This can be checked by opening the doors of the device: no creaking or extraneous noise should be created when opening or closing the doors. If there is one, you should check that the installation is correct, or call a technician from the service center.

Service center master

After placing the refrigerator in its place, you should adjust the legs so that the refrigerator is level. To do this, you need to use a special “level” tool, which is available in the arsenal of almost every owner.

Adjusting the tilt forward and backward

It is important to understand that after the refrigerator is installed, you cannot immediately begin to wash it and connect it to the power supply. It is necessary to wait a certain period of time, on average 4-8 hours. This is necessary to allow the refrigerator to cool down/warm up to room temperature after transportation.

Setting up the refrigerator

The best inexpensive refrigerators under 20,000 rubles

ATLANT XM 4214-000

Autonomous cold storage – up to 16 hours;

compact but roomy;

quiet work.

Prices in online stores

ATLANT XM 4208-000

Retains cold during power outages;

reversible doors;

price-quality ratio.

Prices in online stores

ATLANT XM 4011-022

low noise level;

keeps cold up to 17 hours;

build quality.

Prices in online stores

The best models in terms of price, quality, reliability

Bosch KGV36NL1AR

“Super Freeze” mode

spacious;

designed to operate in conditions from +10 to +38 0С.

Prices in online stores

LG DoorCooling+ GA-B509CQWL

silent operation;

installation close to the wall;

total volume – 384 l.

Prices in online stores

Samsung RT-22 HAR4DSA

No Frost in both chambers;

energy consumption class A+;

Ice maker included.

Prices in online stores

The best devices with a No Frost defrosting system

Samsung RB-30 J3000WW

freezing capacity – 13 kg/day;

suitable for operation under conditions from +10 to +38 0С;

combination of compactness and spaciousness.

Prices in online stores

Hotpoint-Ariston HF 9201 B RO

operation in regions with any climatic conditions;

availability of necessary functions;

build quality.

Prices in online stores

ATLANT ХМ 4426-000 N

convenient internal equipment;

quality of materials;

modern design.

Prices in online stores

The best two-chamber refrigerators with drip defrosting

Such models attract a lower price, although in some characteristics they are often superior to units with No Frost.

Liebherr CUel 2831

stainless steel housing;

Autonomous cold storage – up to 25 hours;

build quality.

Prices in online stores

Stinol STS 150

reversible doors;

quiet operation;

cools well.

Prices in online stores

Biryusa 649

spacious;

powerful cooling;

convenient internal equipment.

Prices in online stores

How to properly install a built-in refrigerator

You can understand the installation process of different types of refrigerators, including No Frost, using the following algorithm:

1. Unpacking and removing protective films from surfaces . Fasteners and parts, various elements are checked. They are specified in the instructions.
2. Compare the dimensions of the equipment with the dimensions of the installation site . Be sure to have ventilation holes and gaps in the required places.
3. Checking the bottom of the equipment for level . In case of deviations, deficiencies must be eliminated.
4. Removing the transport restraints and installing them in place . At this stage, free space is left in front of the facade, which makes it easier to install doors.
5. Place and secure wires under or above the camera.
6. Installation of decorative panels that will hide the installation nuances.
7. Door installation.
8. Sealing metal parts and installing protective elements.
9. Installing the equipment to the required depth and fixing it in a permanent place.
10. Connecting the refrigerator to the network.
11. Functionality check.

You can find out the installation details of a specific model in the instructions. Manufacturers always describe in detail all stages of work.

Refrigerator Installation Tools

When installing the device, a large set of tools is not required. Listed below are all the accessories needed to install refrigerators of different models:

1. Wrench. Often supplied with the device, it is used to adjust the height of the legs.
2. A laser level or a regular building level for adjusting the device horizontally and vertically.
3. Adjustable wrench (alligator) or pliers. If the appliance is equipped with an ice maker, it will need to be connected to a cold water supply.
4. Fum tape (ordinary tow) for sealing the connection between the hose and the pipe in the presence of an ice maker.
5. A screwdriver or screwdriver for mounting decorative elements on the appliance door if the refrigerator is built-in.

Important! Having delivered the equipment home and unpacked it, you need to give it time to adapt to the environment. Before connecting the device to the mains, you should wait at least 6 hours. If it is left for a long time in an environment at sub-zero temperatures, the time should be increased to a day.

What tools will you need?

We suggest finding out what tools you will need when installing different types of refrigerators:

• Wrench . Needed to adjust the legs. Often included with equipment.
• Laser or liquid level . Necessary for adjusting the device in the vertical and horizontal plane.
• Water wrench (pliers or alligator). Required if the refrigerator has an ice maker to connect to a cold water pipe.
• Tow (fum tape) . Needed to seal the connection between the hose and pipe (if there is an ice generator).
• Screwdriver or screwdriver . Useful for installing decorative panels on the doors of a built-in refrigerator.

Example for a built-in refrigerator

How to properly level a refrigerator

To correctly level the refrigerator, you need to use a special liquid level. It must be applied to the walls of the device and the legs must be twisted so that each side is perfectly vertical. Additionally, you can check the horizontal plane by placing a level on the cover of the device.

Reference! You can twist the two front legs a little more than the back ones, tilting the angle a little back towards the wall. This installation will ensure the door closes more tightly. Adjust the angle by 1 - 2 degrees.

Basic mistakes when installing a refrigerator

There are several common mistakes that are made when installing a refrigerator. Knowing them, you can avoid sad consequences.

Installation errors:

• Installation of the refrigerator is not level . If you do not adjust the level of the device, this will cause a loose fit of the device door, noisy operation of the compressor and damage to the rubber seal. When a problem is noticed and not resolved, the equipment may fail.
• Using the device without setting the temperature mode . Setting the temperature in the freezer and refrigerator is very important. If this is not done immediately, then there is not only a risk of breakdown of the entire device, but also spoilage of the products. How to set the refrigerator temperature on the display? The instructions for each model contain details.
• Installation of equipment near the stove . It is extremely important not to place equipment near heating devices, ovens and stoves. The distance from it should be at least half a meter, otherwise there is a high risk of damage to the refrigerator.
• Switching on the device immediately after delivery . The refrigerator must stand for some time before turning on. During this time, the various oils will return to their place. Premature operation leads to serious compressor failure and costly restoration.

In addition to the fact that you need to place the device correctly, you need to understand how to set the temperature in the refrigerator. The temperature setting depends on the design and technical features of the equipment. Many modern models have separate adjustments for the refrigerator and freezer compartments. There are also differences depending on the manufacturer. They usually write down the details in the instructions.

Thus, it is necessary not only to look at how others have refrigerators installed, but also to adhere to the recommendations of specialists. Then the device will last as long as possible and uninterruptedly.