Gas hoses for gas stoves: which hose is better to choose for the stove?

Manufacturers of hoses for gas stoves: TOP-6

Which plan would you choose for a gas stove?

Take the survey

A gas hose is a very simple and unremarkable, but very important product that is simply necessary in a house where there is a gas stove. It will determine how well, reliably and safely the stove will be connected to the gas main.

There are very, very many models and options of gas hoses, differing in length, materials of manufacture and other parameters, in any hardware or construction store. To be convinced of this, just go to some Maxidom and just find a shelf with the corresponding goods. So it’s simply pointless to consider specific hose models. It is better to try to find out the names of manufacturers that you can trust.

Our list below features six manufacturers of rubber and bellows gas hoses. It is these two varieties that are considered the main types of eyeliners used today. Let's get to know them.

Important! Let us remind you that the opinion of the site’s editors cannot be considered the only true and correct one. Readers' opinions may vary. The list of manufacturers was selected based on the popularity of their products and customer ratings.

Rubber Gas Hose Manufacturers

No. 3 - Bed

Gas hose Ruslo
This company has been active in the Russian market for more than 10 years. Previously, it only sold various components that helped ensure water and gas supply, but now it has launched its own production of gas connections, which is located in St. Petersburg.

Ruslo products are certified and comply with all GOST requirements and standards, and have various documents confirming quality, reliability and safety. The brand actively cooperates with gas services, contractors, and a number of construction organizations.

Gas hoses produced by this brand are inexpensive, reliable, meet GOST requirements, made of dense reinforced rubber, but flexible and easy to connect. They are protected from sparks and ignition of gas passing through them. Now such hoses can be bought in all stores in large gasified cities of the Russian Federation.

pros

• Russian brand
• have all certificates
• safety
• Availability - you can buy it in any store
• thick reinforced rubber in hoses
• the hose does not require a dielectric insert

Minuses

• not detected

Prices for gas hoses Ruslo

rubber gas hoses Ruslo

No. 2 - Aquaelka

Aquaelka gas hose
This brand is also Russian, and it also specializes in the production of flexible hoses for water and gas supply. Production is located in Podolsk. The brand has been on the market for more than 20 years. All this time he has been engaged only in the production of gas hoses, flexible connections, siphons, hoses for washing machines, so he has a lot of experience.

The production of hoses here is fully automated and takes place on the latest generation Spanish equipment. The productivity of the enterprise and the quality of products are at their best. Moreover, the brand is already trusted by some other countries - products are also sent abroad. You can safely buy gas hoses from Aquaelka without worrying that they will let you down.

pros

• Russian brand
• cooperates with other countries
• been on the market for a long time
• quality products
• favorable cost of hoses
• strict quality control

Minuses

• not detected

Prices for Aquaelka gas hoses

Aquaelka rubber gas hoses

No. 1 – MasterProf

Gas hose MasterProf
This company is still one of the leaders on the Russian market when it comes to regular supplies of various types of plumbing fixtures. Moreover, the brand is quite young - it appeared in 2012. He is committed to cooperation with DIY networks in the Russian Federation, including the famous Castorama, Leroy Merlin, Petrovich, etc. There are about 70 networks in total.

MasterProf production is massive, automated, working without interruptions. This is what allows him to not interrupt the supply of hoses to large stores. At the same time, the quality of the product does not suffer at all, and the price is reasonable. There are all the necessary certificates confirming the reliability of the hoses, and the manufacturer also provides a long warranty period of two years on them. This is why customers trust the brand: its products are chosen by ordinary city residents, construction companies and a number of other organizations.

pros

• long warranty
• one of the largest suppliers
• cooperates with large chain stores
• good price for the product
• high reliability

Minuses

• not detected

Prices for MasterProf gas hoses

rubber gas hoses MasterProf

Reviews about MasterProf gas connections

Bellows Gas Hose Manufacturers

No. 3 - Overcon

Gas liner Overcon
This is a Russian brand, despite the English spelling. It produces high-pressure metal hoses, heated floors, as well as connections for gas and water supply.

Bellows-type supply hoses produced under this brand are often used to connect gas stoves. They are distinguished by good flexibility and at the same time strength, they can stretch well and return to their original shape. However, before using such a liner, you must acquire a dielectric and install it between the liner and the riser. The warranty provided by the manufacturer for its products can be up to 25 years.

pros

• long warranty
• Russian brand
• excellent flexible hoses
• compliance with all quality standards
• famous brand

Minuses

• not detected

Overcon gas hose prices

flexible gas connection Overcon

No. 2 - UDI

Gas hose UDI
One of the largest suppliers of various engineering components and materials that are used for the installation of gas and heating equipment, as well as for organizing water supply. On sale are valves and fittings, fittings and siphons, corrugations and, of course, hoses of various types, including one of the most popular - bellows for gas communications. UDI not only produces, but also supplies various materials necessary for connecting this or that equipment, and cooperates with a number of stores and service centers, in most regions of Russia.

Bellows hoses from UDI are reliable, safe and inexpensive. They comply with all GOST requirements and are ideal for both independent connection of the stove to gas communications at home and for professional use.

pros

• major supplier
• produces various products
• high quality products
• compliance of hoses with GOST requirements

Minuses

• not detected

Prices for UDI gas hoses

flexible gas connection UDI

No. 1 - Tim

Gas hose Tim
The TIM company is a trademark that has been producing various plumbing fixtures, pumps, materials used for heating installations, as well as bellows hoses for connecting to gas mains for 10 years. Its product range is very large, and everything that the company sells is of high quality.

Now TIM is one of the leading companies on the Russian market. The production employs experienced specialists who support the operation of the enterprise at a high level. Moreover, they manage to combine European quality and Chinese efficiency.

The brand's products are not afraid of corrosion, are reliable and can be used in difficult environmental conditions. Moreover, the cost is moderate and will definitely not scare away the buyer.

pros

• famous brand
• large range of products
• European level quality
• customer trust
• experienced specialists at the enterprise
• products can be used in difficult conditions

Minuses

• not detected

Prices for Tim gas hoses

flexible gas connection Tim

Reviews of Tim gas hoses

What hoses are needed for gas stoves?

A gas stove is a technique that allows you to use regular natural gas for cooking. True, it makes sense to use this type of household appliance like a gas oven only in gasified cities. However, even if there is no gas line in the house, you can also use liquefied gas cylinders as a source of fuel.

A household stove that runs on gas is equipped with several burners and may also have an oven. A gas burner is supplied to the burners, and there is also a gas distribution device that directs fuel to one or another burner. The flame can be adjusted using special levers that change the rate of gas flow into the burner. You can light the burner with any open flame source; there are also options for stoves with automatic ignition, which uses a spark ignition system using electricity.

This is what a gas burner looks like

Attention! Gas is dangerous! Or rather, it is dangerous not in itself, but because of its ability to instantly ignite. It is important to prevent gas leakage from the line to avoid an accident. Fortunately, modern stoves are able to automatically stop supplying fuel if, for example, the burner goes out. But, nevertheless, it is very important before using the oven to check that the entire system is connected correctly, securely and safely.

Immediately after purchasing a brand new gas stove, it can already be connected to the gas supply line. There are special services that do such work, but they will need to pay for the service. That’s why many people decide to connect the stove themselves, especially since the procedure seems very simple at first glance. But, like any job, it has its own nuances.

It is interesting that previously gas stoves were simply soldered tightly to the gas source pipe, without requiring any more connection options. Moreover, this method of connecting slabs was used only about 30 years ago. It was safe, but very inconvenient - it was impossible to wipe the floor under such a stove; if necessary, it was impossible to move it, well, and if it came to replacing the kitchen set, then it was a sad story. So when special thin and flexible hoses began to be used when connecting gas stoves, the joy of gas stove owners knew no bounds.

The process of connecting a gas stove to the mains

Now a special flexible hose is used to connect the gas stove to the main line. It has fittings (nuts and fittings) on one side and the other, which make it possible to obtain reliable connections both with the place where the gas exits the line and with the place where the gas enters the furnace. Such a hose can be made from different materials, but in any case it is flexible, strong, durable and, most importantly, inexpensive.

Connecting a gas stove to the mains using such a hose is the work of an experienced specialist. Otherwise, there is a high risk that the connection will be incorrect, which means that the likelihood that the entire kitchen will fly up into the air increases. Gas is no joke; you need to work with it with extreme caution.

No one will stop you from trying to connect the stove to the mains yourself. If you have some experience working with various connections, and also taking full responsibility upon yourself, you can easily buy a hose that suits the parameters and connect the stove yourself. The main thing is to take a responsible approach to both the work itself and the choice of hose.

Subtleties of operation

When operating flexible gas hoses, like all gas equipment, safety regulations must be strictly observed. Gas is an object of increased danger and requires the unconditional fulfillment of a number of important conditions.

The room where gas equipment is installed must be equipped with a ventilation hole, and the vent or window must open freely. This requirement is due to the need for an influx of oxygen to support combustion. Immediately after installing or replacing the flexible hose, it is necessary to ventilate the kitchen, make sure that the burner and oven controls are in the off position, lubricate all connections with a solution of laundry soap, and only then open the gas supply valve located on the main pipe. If soap bubbles appear at the threaded connections, you should immediately turn off the gas valve and take measures to reseal the joints. If bubbles do not appear, then you can proceed to a test run of the oven without removing the soap solution from the joints. This is necessary in order to monitor how the connections will behave under pressure. The burners should be lit with a special piezo gas lighter or matches. The use of gasoline models, as well as gas lighters of smokers not suitable for this purpose, is prohibited. Before lighting the oven, it is recommended to open the cabinet door and ventilate it for a few minutes. Then you need to twist the paper string, light it from the flame of a match and light the burner. After all the burners and the oven are turned on, you need to once again check the threaded connections of the flexible hose for the presence of bubbles; if there are none, remove the soap solution with a damp cloth. Burning of blue fuel should proceed evenly, without jerkiness and flashes of fire, which can lead to the release of carbon monoxide and deformation of the burners

The flame should have a bluish-violet hue without red-yellow flickers, and its height should be no more than 2.5 cm. During the cooking process, it is important to ensure that the flame barely touches the bottom of the pan and does not go beyond its limits. Otherwise, when gas comes into contact with a cold bottom surface, the effect of “chemical underburning” occurs, leading to the risk of CO2 formation

In this regard, the flame height must be adjusted. It is prohibited to heat premises with gas stoves, trust their use to persons under 18 years of age, or leave them turned on unattended. If the flame suddenly goes out, a gas smell appears, or the color of the fire changes, you should immediately turn off the main valve and call a gas service specialist. At the end of cooking, turn off the gas supply valves on the stove, and then on the main pipe. After a while, you can also close the window. It is necessary to periodically inspect flexible gas hoses and try not to miss the deadline for replacing them. It is recommended to wash your sleeves at least once a month, using a weak solution of laundry soap or soda. If a gas furnace with electric ignition begins to generate electric current, you must immediately stop using it and call a technician.

To learn how to install hoses for a gas stove, see the following video.

Hoses for gas stoves: types and sizes

The hose that connects the familiar gas stove and the line that contains the gas looks like a regular water supply. But it has a special mark that allows you not to confuse the products with each other - these are white or yellow markings (the latter option is more common). Moreover, the marking should be very clearly visible.

The fuel hose is made from different materials and, depending on this, acquires certain properties. But in any case, the product will be flexible and convenient. Let's get acquainted with the types of gas hoses.

Rubber gas hose

Rubber hoses are variants of products that, as you might guess, are based on rubber; they are made from this very material. Rubber is one of the best dielectrics in nature, meaning it does not conduct electricity. But the service life and strength of a hose made from it is low. Typically, the rubber used to make products contains various components that add elasticity to it and extend its service life. But still, this does not change the fact that the rubber begins to crack over time, and the hose becomes dangerous for further use.

Rubber Braided Gas Hose

In turn, rubber hoses can be divided into two subtypes.

Table. Subtypes of gas liners made of rubber.

Oxygen gas hose
There is also an oxygen hose - also an inexpensive, but durable and pressure-resistant line option up to 20 atm. But it is rarely used in apartments. The fact is that such a hose is not suitable for organizing supply to various devices. Usually it is used only for temporarily connecting equipment to a gas cylinder somewhere in the country (it is necessary to additionally use a reducer to ensure sufficient safety). This option must be handled very carefully.

Stainless Steel Bellows Type Gas Hose

The next type is a bellows hose. It is also flexible, but is considered the most durable, safe eyeliner option. Moreover, it can shrink and unclench, change its size. The optimal solution for those who do not want to frequently change gas hoses or worry about fuel leaks.

On a note! A bellows is a corrugated shell made of metal or other material that has high density and strength and maintains good performance characteristics in almost any conditions.

The bellows hose is sealed and made of polymers and steel, additionally reinforced with an annular or screw corrugation. The corrugation, in turn, has a wire in its design - this allows it to withstand very high pressure if necessary.

The fittings that end the line are made of brass or steel, have threads and reliable gaskets that will ensure a reliable and safe connection.

Bellows gas hose fittings

On a note! Manufacturers of bellows hoses report an interesting fact: such a hose has exactly the same structure as the human intestines. So, thanks to this factor, the hose easily changes size, stretching, bending in every possible way, becoming longer or shorter. At the same time, the product does not lose its quality and does not become less elastic. But remember that you should not stretch the hose more than 50%.

Advantages of a bellows hose:

• not afraid of electric current (up to 1500 V);
• easily copes with pressure up to 6 atm;
• easily changes its size and returns to its original parameters;
• not afraid of chemical or moderate physical impact;
• safe;
• serves for a long time (up to 30 years);
• reliable;
• compatible with various equipment;
• has good density, but is flexible;
• withstands heating up to +250 degrees and cooling down to -50.

By the way, the bellows hose often also has a thermal protection valve, which, if the temperature rises too high, easily cuts off the gas supply. The color of the bellows product in a polymer shell is bright yellow.

Bellows gas hose with markings

These are the options that professionals involved in connecting gas furnaces recommend using. They even meet European requirements regarding quality and safety (in Europe it is completely prohibited to use conventional rubber products). But there is also a very significant drawback - the relatively high cost of the products. But it is suitable for connecting to a gas water heater, a boiler, a stove, etc., and is manufactured on the basis of GOST. Can be used even outdoors or indoors with large temperature changes.

With metal braid

It has an optimal ratio of price, quality and durability. Price from 140 rubles per 60 cm of finished product. The hose is made of vulcanized rubber and reinforced with textile thread. The outer part is a metal braid.

One of the most common options, the popularity of which is associated with many positive qualities, including:

• high level of reliability;
• ease of installation;
• longer service life compared to rubber products;
• large selection of lengths and diameters;
• permissible temperature has a wide range from -35 to + 50 degrees;
• ease of use.

Expert opinion Anton Valerievich Tsugunov is an all-round master, since 2003 he has been engaged in the repair and decoration of premises, more than 100 completed projects. I value quality more than quantity!

Gas services often recommend replacing old metal-braided hoses due to the inability to check the condition of the rubber under the braid. If it is impossible to confirm the relevance of the product’s service life by the passport, then I recommend replacing the eyeliner with a bellows or reinforced PVC one.

Gas hose sizes

If we talk about sizes, gas hoses in the store are sold in a variety of lengths. This will allow you to competently, accurately and correctly connect the stove to the main line without violating any requirements. Yes, yes, there are certain requirements for the length of the flexible type of supply hose that is used to connect the slab and the main pipe.

So, according to a number of regulatory documents, to connect the stove to the gas main, a flexible type liner with a heat resistance of at least 120 degrees can be used, without unnecessary joints and connections. But as for the length, there are restrictions only in Europe, but in Russia they are not yet available. In European countries, the length of the hose cannot exceed 2 m. But in our country, you should not abuse the absence of a specific ban: the matter, first of all, is for your own safety. It is best to limit yourself to the same 2-3 meters and not tempt fate.

Calculate in advance how long the gas hose you will need

Sometimes specialists who come to you to connect the furnace suggest increasing the length of the gas line itself. But this is an expensive service that gives them the opportunity to make money from you.

It is also important to consider the following aspects of installing a flexible gas hose.

• it must be available for regular inspection for integrity;
• bends and pinching should not be allowed;
• the hose should not be mounted in such a way that it is under tension during use;
• The hose should not be placed where there is high humidity (for example, behind a sink). There is a risk of corrosion.

Important! The gas shut-off valve must be located on the horizontal part of the gas pipe and be at a distance of at least 20 cm from the stove. If the wiring is from above, then the faucet is installed at a height of 1.5 m from the floor on the descent to the stove.

If necessary, you can become familiar with the rules and regulations for connecting furnaces to mains by reading the official document. This is SNiP No. 42-01-2002 dated 03/01/2005. "Gas distribution systems".

Safety regulations

Many users are completely incompetent in these matters, so it is our duty to remind them of the safety principles:

• the hose must be constantly accessible and visible - it must not be covered with foreign objects;
• In addition to it, only a wire for lighting in the oven should be connected to the stove;
• paint cannot be applied to its surface;
• the hose, when connected, should sag freely and not be in a tense position - this may cause it to rupture;

• when purchasing and installing this product, calculate in advance how far you will move the stove during general cleaning or when rearranging furniture in the kitchen, taking into account that its maximum length is no more than 4.5 meters;
• do not allow the product to bend or twist;
• It is better to replace the hose a little earlier than its service life, without waiting for a gas leak with negative consequences to occur.

When repairing a gas pipeline using welding, the product must be turned off, and the stove must be moved to the maximum distance, covering its back with a piece of durable fabric to protect it from sparks. The more carefully you use the hose, the more secure your kitchen will be. The rules for operating gas stoves are described in detail here. To reinforce the above, watch this video:

Choosing a hose for connecting a gas stove

The choice depends on a number of factors. For example, you need to consider where the stove will be placed, under what conditions it will be used, etc. But the basic requirements for eyeliners do not depend on their type:

• Inspect the selected option for integrity.
• The protective coating on the outside should also be intact and generally exist.
• Be sure to check that there are no unnecessary connections or extension cords.
• If the hose has a metal coating, check if the braid is rusty.
• There must also be a yellow mark on the hose. It is she who will inform you that the product is designed to work with gas.

The sizes of gas hoses are very different.
The sizes of the connections can be different. The most common ones are 1-1.5 m. It is not worth buying a product with a large margin of length - it is enough to add 20 percent of it to the value obtained during preliminary measurement.

There can be different types of connections at the ends - nut-nut or nut-fitting (female-male). They usually have ¾ or ½ inch threads. The fitting has a thread on the outside, the nut on the inside. You need to choose the type of connection depending on what gas outlet is made on the stove itself.

Experienced gas workers recommend buying a product with an internal diameter of at least 1 cm, if we are talking about the bellows version. Then the gas will be supplied evenly even when all burners (4-5) are operating. And the larger the diameter of the hose, the better.

Advice! Buy gas hoses from trusted and reliable stores that work with honest suppliers. Then the risk of running into a fake is minimal. And you can’t just determine the latter by eye.

As a budget option, you can buy a rubber-woven hose. But we still recommend choosing bellows as a more reliable and durable option. The rubber one is suitable for temporary connection.

Bellows connection for gas

Most importantly, no matter what hose you choose to connect the stove, it is important that the product has all the relevant certificates, markings, and the date of manufacture. Moreover, the certificate must be issued by Rostechnadzor of the Russian Federation. If there is no such certificate, then the product may not meet all safety requirements. As for the date of manufacture, this is a very important point: for example, a hose that has rubber in its structure has an expiration date. If it expires, the product becomes unreliable. Usually such information is in the product passport.

Liner service life

There are several types of products, each with its own service life. This depends on the technical characteristics of the liner; it is better if a label is hung on it during installation of the system, indicating the dates of commissioning and end of operation.

The service life of a gas hose for your stove depends on the type of hose chosen, its quality, and the strength of the connection of all elements. Different types of products have their own service life. For:

• bellows (these are modern parts, they are made in 3 types: simple, metal, stainless steel, PVC coated) - 15–30 years, but the equipment serves regularly for 20 years, so the liner must be changed along with it;
• rubber-fabric manufacturers recommend using parts for up to three years, after which, if there are no visible defects on the part, it can be left for a while longer;
• reinforced, due to the use of high-strength materials in the manufacture of hoses, the service life has increased and is up to 10 years;
• oxygen - up to 5 years, but on rarely used equipment such as cylinders;
• rubber with a metal sleeve – no more than 10 years.

This is the approximate service life of different gas hoses for equipment installed in apartments. The service life of hob connections and all equipment depends on many factors. These include:

• poor operating conditions of the system significantly reduce the time of use of all elements;
• correct and high-quality installation;
• correctly selected characteristics of the hoses, they should not be tense, but should sag a little;
• quality of the products themselves, it is worth choosing a reliable manufacturer and supplier of products.

The listed service life must be calculated not from the time of purchase of the product, but from the date of its installation.

Gas stove connection diagram

When the necessary hose has been purchased, you can either invite a specialist or try to connect the gas stove yourself. First you need to find the outlet that the household appliance itself has, and see what shape it is - it can be angular or straight. It is worth paying attention to this - the hose should not bend during operation! If the outlet is straight and the main pipe is located to the side, then you will need to purchase a special elbow with thread. When connecting, do not forget to use a special gasket made of paronite, a thin composite material. By the way, the paronite gasket comes complete with the hose. The product is screwed tightly to the outlet with an open-end wrench, but you shouldn’t be zealous. The gasket will reduce the risk of gas leakage.

Gas stove connection diagram

Advice! It is recommended to buy the gasket yourself in the store rather than use the one in the kit. The best option is with a fine metal mesh. This gasket will protect the oven from a number of contaminants.

By the way, the gas pipe is usually located somewhere in the corner of the kitchen. And a ball valve is welded to it, to which our hose is ultimately attached. The hose nut is screwed onto it.

It is important to check for fuel leaks. To find out whether it is there or not, you need to take soap foam, apply it with a brush to the joints and turn on the supply. No bubbles - no leakage.

Correct installation diagram for a gas stove

Security basics

And finally, there are a few aspects that need to be taken into account when using a gas hose. They are the key to your safety.

Observe safety requirements when connecting the gas hose

• The liner should be positioned so that it can be reached at any time.
• You cannot cover or curtain the hose with anything “for beauty”.
• It is advisable to regularly clean the product from dust and debris.
• The hose must not be placed under tension; it should sag slightly.
• If the stove suddenly needs to be moved, it is important to close the gas supply ball valve before doing so.
• Do not bend or twist the hose.
• No additional joints or extensions should be made.
• You cannot weld or solder the hose to the outlet of the line.
• It is necessary to regularly change the product to a new one, focusing on the period of use of the installed version.
• You need to make sure that the eyeliner does not lie in a damp place where it may begin to rust.

Description

Requirements for windows in a gas boiler room
The hose for a gas stove is a flexible pipe designed to connect a household appliance to the main gas pipeline using threaded connections. The main advantage of gas hoses is their ability to provide a tight connection in compliance with all safety requirements, as well as high elasticity, allowing the device to be moved after connection. The flexibility of gas hoses is especially important when installing kitchen units, when it becomes necessary to slightly adjust the location of the stove.

Previously, before the advent of gas hoses, the connection of stoves was carried out using steel pipes. As a result, the devices were “tightly” installed in a certain place and it was impossible to move them even a millimeter. With the advent of flexible hoses, the situation has changed radically; today, a connected kitchen stove can be easily moved to another place or turned around.