It must be powerful and productive enough so that the water pressure is stable at all water intake points in the house.
How to choose a pump for a well?
What technical characteristics are paid attention to, and which ones do not play a key role in operation?
In the article we will try to answer these questions, and a short checklist with basic selection criteria and a rating of the best well pumps according to the 2021 version in price/quality ratio.
Rating of the TOP 15 best pumps for wells in 2021
| Place | Name | Price |
| TOP 3 best well pumps by price/quality for 2021 | ||
| 1 | GILEX Water cannon PROF 40/50 | Find out the price |
| 2 | VORTEX CH-100V | Find out the price |
| 3 | BELAMOS 3SP 60/1.8 | Find out the price |
| TOP 3 best surface pumps for wells | ||
| 1 | GILEX Jumbo 50/28 Ch-18 | Find out the price |
| 2 | VORTEX ASV-370/2 H | Find out the price |
| 3 | Metabo P 3300 G | Find out the price |
| TOP 3 best submersible pumps for wells up to 20 m | ||
| 1 | VORTEX VN-15V | Find out the price |
| 2 | KARCHER BP 1 Barrel | Find out the price |
| 3 | LIVGIDROMASH Baby BV-0.12-40-U5 10 m | Find out the price |
| TOP 2 best submersible pumps for wells up to 30 m | ||
| 1 | GILEKS Water cannon PROF 55/50 A df | Find out the price |
| 2 | Daewoo Power Products DBP 1800 (750 W) | Find out the price |
| TOP 2 best submersible pumps for wells up to 50 m | ||
| 1 | VORTEX CH-60 | Find out the price |
| 2 | Aquario ASP 1E-55-75 | Find out the price |
| TOP 2 best pumps for wells with overheating protection | ||
| 1 | Grundfos SBA 3-45 A | Find out the price |
| 2 | BELAMOS TF3-80 | Find out the price |
TOP 3 best pumps for a well 25-30 m deep
GILEKS Water cannon PROF 55/50 (600 W)
Submersible pump for wells and boreholes with clean cool water for organizing automatic watering of a vegetable garden or garden.
A 600 W motor provides a pressure of up to 50 meters, pumping up to 3.3 cubic meters per hour.
The pump can be submerged to a depth of up to 30 meters . The entire operation of the pump is automated; there is no need to monitor the water level in the source, since the model is equipped with a float switch.
Keep in mind that to create complete automation of water supply to a private house, you will need to purchase some additional parts.
The pump is equipped with a cable 20 meters long and connected to a voltage of 220/230 V.
It does not tolerate regular power surges well, so it is recommended to install a stabilizer to prevent the engine from burning out. The pump body is made of stainless steel, is not afraid of rust and ensures a long service life.
Main characteristics:
- Immersion depth is up to 30 meters.
- Pressure (max), m - 50.
- Throughput, cubic meters m/hour - 3.3.
- Power, W - 600 W.
- Water temperature, °C - 35.
pros
- provides good pressure;
- does not make noise;
- uses energy economically;
- high performance.
Minuses
- fragile plastic components;
- short power cord.
GILEKS Water cannon PROF 110/110 (1800 W)
The model is easy to use and install, is a centrifugal pump with multi-stage cleaning for immersion to a depth of up to 30 meters.
The pump has a washed motor, a condenser and floating impellers. The device is used for pumping exclusively clean water from wells and boreholes with a diameter of 11 centimeters or more.
Buyers note the high build quality, thanks to which the pump will last a long time without breakdowns.
The body of the device and all bearings used are made of stainless steel, the wheels are made of bronze, and the seals are made of cermet.
One of the advantages of the model is a long power cord (70 meters), so the pump can be connected directly to the power source, without using an extension cord.
It tolerates minor voltage surges well, in this case there is no need to install a stabilizer.
Main characteristics:
- Immersion depth is 30 meters.
- Pressure (max), m - 110.
- Throughput, cubic meters m/hour - 6.6.
- Power, W - 1800.
- Water temperature, °C - 35.
pros
- good performance;
- long network cable;
- full maintainability.
Minuses
- high price.
GILEKS Water cannon PROF 55/75 (900 W)
A reliable pump for a well or borehole, which is designed to supply water to a house where a significant number of people live.
Suitable for installation in a source with a diameter of 10 cm or more; it can pump exclusively clean water, as it is not equipped with fine filters. Large particles can cause clogging and engine damage.
The pump dives to a depth of 30 meters, pumping 3.3 cubic meters per hour with a maximum pressure of up to 75 meters.
For correct, stable, long-lasting operation, care should be taken to stabilize the voltage in advance, since the engine does not tolerate regular surges well and may fail.
The manufacturer in the technical data sheet indicates a service life of three years, but buyers claim that the pump can work twice as long.
Main characteristics:
- Pressure (max), m - 75.
- Throughput, cubic meters m/hour - 3.3.
- Power, W - 900.
- Water temperature, °C - 35.
- Weight, kg - 11.7.
pros
- withstands small voltage fluctuations;
- consistently powerful pressure;
- good performance indicators;
- does not make noise during operation.
Minuses
- With regular voltage surges, a stabilizer is required.
How to choose a pump for a well?
Well pumps are centrifugal, vortex and screw. Devices of the first type are inexpensive, but are only suitable for wells no more than 50 meters deep. Vortexs are capable of lifting water to great heights, but are also sensitive to water quality.
The most functional are considered to be auger devices that are capable of lifting water with a high sand content to the surface.
In addition to the pump type, attention is paid to the following technical characteristics:
- Productivity . This criterion must correspond to the rate at which the well is filled with water, so that the pump does not pump water out of the wells faster than it enters.
- Maximum pressure . This criterion refers to the height to which the pump can lift water.
- Immersion depth . In this case, we mean diving under water, and not into a well in general. For example, if the well depth is 50 meters, and the distance from the surface to the water surface is 20 meters, then the maximum immersion depth should be 30 meters.
- Cord length . For other pumps this indicator does not play a key role, but in the case of well devices, the cable length must correspond to the cable depth.
It is also desirable that the pump be provided with protection against overheating and protection against dry running. Most modern models have such functions, so choosing the right device will not be difficult.
TOP 3 best pumps for a well 40 m deep
Aquario ASP 1E-55-75 (700 W)
If you are the owner of a deep well with a diameter of 10 cm or more, then you should consider this model of a submersible pump with vertical installation.
Thanks to the 700 W motor, up to 3 cubic meters per hour is pumped with a maximum pressure of 60 meters. The immersion depth of this model is 50 meters; the device is designed to work with clean water, the temperature of which does not exceed 35 degrees.
The body is made of stainless steel and is not afraid of corrosion, which indicates a long service life of the pump..
The check valve prevents water from being discharged through the pump into the well after the pump is stopped.
The use of environmentally friendly materials allows you to use the device for pumping drinking water into a private house or cottage.
There is a built-in thermal switch that will protect the engine from overheating and prevent it from starting until the system has completely cooled down.
Main characteristics:
- Immersion depth is up to 50 meters.
- Pressure (max), m - 60.
- Throughput, cubic meters m/hour - 3.
- Power, W - 700.
- Water temperature, °C - 35.
pros
- cord 35 meters;
- good performance;
- there is a thermal switch;
- does not make noise during operation.
Minuses
- no dry running protection.
Aquario ASP 1.5C-60-75 (920 W)
Submersible pump for a summer house or cottage with a maximum immersion depth of up to 50 meters and a jet pressure of 77 meters.
Suitable for installation in a well or well with a sand content of up to 120 grams per cubic meter. Per hour, it carries out up to 30 starts, providing water within 3 cubic meters, while consuming 920 W.
It works quietly, installation is very easy, complemented by a 45 meter long power cord.
Also included is a remote control. The pump has a very simple design, consisting of a single-phase electric motor and a pump made of high-quality polymers framed in a stainless steel housing.
Liquid is taken from the middle of the body, which is favorable for working in the presence of bottom turbidity . It is not afraid of voltage surges, so installation of a stabilizer is not required.
Main characteristics:
- Head (max), m - 77.
- Throughput, cubic meters m/hour - 3.
- Power, W - 920.
- Water temperature, °C - 35.
- Sand content - up to 120 g per cubic meter.
pros
- reliable design from an Italian manufacturer;
- good pressure and high performance;
- full maintainability;
- long service life.
Minuses
- Dimensions are larger than indicated in the technical data sheet from the manufacturer.
VORTEX CH-60 (800 W)
Pump for wells and boreholes with a diameter of 75 mm, which pumps slightly contaminated or clean water to a private house or garden plot (watering/irrigation).
Immerses to a depth of up to 50 meters, the maximum pressure reaches 60 meters. About 3 cubic meters per hour are pumped thanks to an 800 W motor.
There is protection against overheating; the thermal relay will not allow the engine to operate when the critical temperature is reached.
The body of the model is made of stainless steel, and the pump part is chrome plated.
This helps the pump ensure reliable, trouble-free operation and a long service life.
Water intake in this device is carried out in the middle, between the engine and the impeller block . You can safely connect 2-3 private water supply points to such a pump and provide your home with clean water.
Main characteristics:
- Immersion depth is up to 50 meters.
- Pressure (max), m - 60.
- Throughput, cubic meters m/hour - 3.
- Power, W – 800 W.
- Water temperature, °C - 35.
pros
- good performance;
- wear-resistant body;
- silent operation;
- Suitable for deep and narrow wells.
Minuses
- short cord - 20 meters.
Analysis of small nuances
The quality of drilling work is another point that needs to be taken into account when choosing a pump for a well. If drilling is carried out using professional equipment and a specialized team, such a well is considered more reliable.
If the drilling was carried out by shabatniks or the owners of the site with the help of amateur friends, the quality of the well is unlikely to be ideal.
If a well is drilled professionally, it will be less likely to become silted and sandy, which will have a beneficial effect on the operation of pumping equipment
“Amateur” wells, as practice has shown, are more susceptible to the processes of filling and sanding. Therefore, for such wells it is recommended to use special pumps designed to operate in difficult conditions. Equipment of this type is more expensive.
But it better withstands situations where they receive water with a large amount of contaminants. Under the same loads, conventional pumps break down much more often. Owners of “professional” wells have more options when choosing equipment, since they can choose either a universal or a special pump.
It is not always convenient to use a rubber hose to lift water from the depth of a well to a height. During operation of the pumping equipment, the air inside the hose becomes rare, causing the walls of the hose to collapse and the flow of water stops. It is simple to prevent this phenomenon: instead of a rubber hose, you should use plastic structures of a suitable diameter.
A pressure-rated water supply pipe is more efficient when used in a well than a rubber hose, which can collapse, obstructing the water supply.
An important indicator when choosing a pump is the approximate water consumption for one day. This is an average value, since water consumption usually increases in summer, and, on the contrary, decreases in winter. It is believed that the daily consumption rate for a family of three to four people is approximately 60-70 liters.
These figures do not take into account water consumption for irrigation and other household needs. The daily rate should be increased depending on the number of plants on the site, the presence of pets, etc.
Prudent owners most often choose four-inch casing pipes for a well, although structures with a diameter of three inches are also used in this capacity. The fact is that a significant part of the pumping equipment is designed specifically for a more spacious four-inch pipe.
To convert centimeters to inches, you should divide the measurement result with a tape measure by 2.54, since this is the number of centimeters that equals one inch.
In order to ensure that there is sufficient pressure for operation at all water intake points, a hydraulic calculation is required. An approximate version of it can be made using this table. The pump must be sufficiently supplied to all points
Which company should you choose?
In order for the pump to serve for a long time and not cause trouble by constantly breaking down, it is not recommended to skimp on quality.
Experts advise choosing among popular brands that are time-tested.
They produce both pumps for wells and boreholes. Their products are famous for their good performance and reliability.
The ranking of the best manufacturers is led by such companies as Grundfos from Denmark, domestic VORTEX, Aquarius, Gilex, German Denzel, Karcher.
