Quiet sound on a computer, laptop. How to increase volume in Windows?

Check the connection quality

The device may have the wrong connector or the plug is not inserted tightly. It should insert with a characteristic click. In addition, if we are talking about a computer, a corresponding icon will appear in the tray, confirming that the connection was successful.

By clicking on this icon, set the volume to maximum and check the sound. If you are watching a movie or listening to music on an audio or video player, also check the volume. Some programs, such as Media Player Classic, allow you to increase the volume even above the 100% mark.

Recommendations: 10 Best Wireless Headphones

, How to set up headphones for high-quality sound reproduction

, Headphone pinout

Checking work

After connecting the headphones, you should check that they are working correctly. To test the sound, just turn on any music file, go to a site with audio or video content, or even just move the slider on the volume control.

The microphone is checked in the following ways:

1. Turn on the voice recorder application (“Sound Recording” in the list of standard Windows functions). They check whether it will be possible to record sound using headphones or not.
2. Use a special program to configure the microphone in the headphones.
3. Go to Skype, where there is a sound test function - Echo/Sound Test Service. Run the test and check the operation of the recording and playback devices.

If the test shows normal operation of the recording and playback parts of the headset, we can assume that its connection was successful. If problems arise, you should familiarize yourself with several ways to set up headphones with a microphone on your computer. The first is the activation of the device in the system.

Check your settings

Go to the “Control Panel” of Windows 7 and find the “Sound” icon there. After selecting it, check for the presence of headphones in the list of devices, and also by right-clicking on them, make sure that they are activated.

After that, double-click on the line with headphones to open their properties. Next, on the “Advanced Features” tab, check the box next to “Sound Leveling” if it is not already checked. Click “Apply” and test the sound.

First, let's look at possible problems with quiet sound.

• headphone malfunction. Perhaps the headphones are simply damaged or the sound volume suffers greatly due to their quality;
• problems with connection or output on the computer;
• software sound limitation.

So, the first thing to do is to trust the performance of the headphones and try a few simple mechanical methods.

Checking the functionality of the headphones

For this:

• Connect other headphones to the computer and check the sound quality in them. If this is not possible, then check your headphones on any other device. For example, on the phone;
• Check that the plug is inserted all the way. As usual, on a computer, headphones can be connected to acoustics or to the system unit. Try connecting your headphones to a different jack;
• Check all mechanical switches and volume controls. Turn them all the way up.

Software volume limiting

If you have used all of the above methods, but there is no increase in volume, then let's move on to more serious and complex methods.

Updating device drivers

1. Open the Start menu and write “Device Manager” in the search bar. Let's open it.
2. Find the line “Sound, video and gaming devices” in the list of devices. Right-click on the device and select “Update Driver”. Right-click on “Device” and select “Update Driver”
3. Select automatic driver search. Select “Automatic driver search”
4. The system itself will find the necessary drivers. Another option is possible - the system will inform you that the current version of the software is installed and no update is required. The latest software version is installed

Next, let's check whether the volume is set to maximum in the operating system itself. For this:

1. In the right corner of the screen, to the left of the clock, there is a button with a picture of a speaker. Click on it. Click on the button with the image of a speaker
2. A volume scale will appear, the slider must be at the top, otherwise the volume of sounds will be limited by software. Move the volume scale up
3. Under the scale you will see a button labeled “Mixer”, click on it. Click on the “Mixer” button under the volume adjustment scale
4. Make sure that all the sliders are also at the highest point. Move the sliders to the highest point

Read the detailed information in the article “How to install sound on a computer.”

Check your drivers

Make sure your device has the latest sound drivers. An unsuitable driver will either not allow the headphones to be recognized at all, or their functionality will be minimal. The most common driver-related problems:

• bugs made by developers (usually fixed with the release of new versions);
• the driver version is not suitable for the specific version of the operating system;
• The driver is conflicting with one or more media devices.

Drivers can be updated through the official website of the headphone manufacturer by selecting the model with which you are having a problem. To do this, you also need to know the OS version and its bit depth.

There are special utilities for controlling drivers that will do everything for you. For example, DriverPack Solution or Driver Booster. The program will scan your computer, determine the models and versions of connected devices, and automatically download drivers that are ideal for them.

Before this, you can check for problems with drivers through Device Manager (if there are exclamation marks near one or more items, this may be the reason for the headphones not working properly).

How to use wireless Bluetooth headphones

Use sound enhancement programs

One such program is Sound Booster, but there are several similar ones. The software can increase the sound volume up to 500% in some programs - Skype, audio and video players, Internet browsers.

It is convenient to control the volume; you can do this using hot keys. It is also possible to set these programs to autorun so that they appear in the tray immediately after turning on the computer. If the program is developed with high quality, it will not distort the sound due to the presence of certain filters.

Increase the volume of an individual track

Today, there are many programs that will help enhance the sound of a specific melody if only it is playing quietly. For example:

1. Audio editors such as Adobe Audition or Sony Sound Forge. These two programs are distinguished by the fastest file processing speed and compression percentage. With their help, you can perform any desired manipulations with the track, including increasing the volume.

2. If you need to enhance the sound of several tracks at once, try the mp3gain program. It can batch edit some parameters of audio recordings.

If nothing could be done programmatically, then the problem is most likely in the hardware.

Headphone wiring

Possible causes of low sound

The following factors directly or indirectly affect the sound volume in headphones:

• current strength in the turns area, depending on the power of the audio card amplifier;
• coil resistance in the membrane;
• possible recoil of the diffuser (membrane) itself;
• transition resistance acting in the connectors.

One of the most logical ways to increase the volume of your headphones is to increase the current flow. In simple terms, programmatically increase the volume. We have already looked at ways to do this. Please note that if wheezing and creaking appear, then the speaker simply does not support the volume you have selected.

If software methods fail, the problem is most likely a lack of matching between the amplifier's output stage and the impedance supplied by the headphone coil. This is possible if the amplifier supports a load of 4 ohms, and specific headphones are equipped with an impedance of 32 ohms. Then all that remains is to think about purchasing another model.

You can also try cleaning the connector that connects the headphones to the audio card with sandpaper (zero sandpaper). And don't forget to test your headphones with another device to make sure they are the problem.

Some users have found another way for themselves - they connect headphones to the input on the speakers, and the speakers themselves to the sound card. It is noted that in this case the headphones sound much louder.

How to connect wireless headphones to your phone

Ways to improve sound in headphones

To improve the sound of your headphones you need to:

1. Adjust the equalizer. This is a basic solution that can get rid of most problems. The equalizer can be adjusted to suit different types of sound or add more bass.
2. If you are using a computer, you should update your drivers.
3. Buy modern equipment.
4. Check the normal settings and change the necessary settings.
5. Install special programs for a high-quality signal.

To improve quality on your smartphone, you can use one of the following applications:

1. Headphones Equalizer. This set of programs allows you to adjust the sound individually for different headphones. The program is in great demand as the sound quality improves.
2. EQ Music Player. The application has many tools to help with setup. You can improve the bass, or work with the sound only in certain programs, games or music.
3. Music equalizer. This program will allow you to debug sound signals, breaking away from the genre of music.
4. Music player. A set of additional functions that are convenient to use.

The following programs are suitable for a computer:

1. Hear 1.0. The network program has a good equalizer and settings that make the sound very high quality.
2. DFX Audio Enhancer. Allows you to change the sound separately for each program. Very convenient to use.
3. Razer Surround 7.1. The program allows you to make the sound better if you use headphones.
4. Stereo Tool The program has about 30 settings that will make the sound better.
5. Breakaway Audio Enhancer. Allows you to create a virtual sound card on your computer with excellent sound quality.

Setting up on a computer

The sound needs to be improved. For this:

1. Go to “Start”, “Control Panel”.
2. A window opens where you need to select the “Sound” section.
3. Highlights a small window. We need the “Playback” tab (it’s the default).
4. There will be a list of devices connected to the computer. We are looking for our headphones.
5. Click on the headphones line with the left mouse button twice. Another window will appear.
6. Here you need to select the “Levels” tab.
7. Click on the “Balance” button. A small window will appear.
8. Using the sliders, we adjust the sound of each speaker.
9. Now go to the “Advanced Features” tab.
10. We are looking for the “Volume equalization” parameter. Check for a check mark next to it. If it's not there, we'll install it.
11. You can also go to the Advanced tab. By clicking the “Check” button, you can check what changes have occurred.

Setting up on your phone

The principle of setting up different types of phones is the same, but the algorithm itself may differ depending on the device model. For example:

1. You can use the standard player settings on Android. There should be ready-made options that depend on the genre of music. You can set the mode, add special effects, select the frequency.
2. Using standard settings, you can increase or decrease different types of sounds. For example, make the music quieter and the alarm signal louder. Some modern device models also have noise suppressors installed.
3. Engineering menu. It is a hidden application that can be accessed using a special set of commands. Recommended for advanced users.

Please note that not all recommendations work if the headphones are turned off. If the headphones hiss or are hard to hear, you can set them up following the recommendations in the article.

Subscribe to our Social networks